Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; heater voltage 2.4 V; heater resistance 74Ω at nominal power. Check that your power source supplies 2.4 V before connecting it.

Key Highlights

  • Item Type: Gas Sensor
  • Heater Voltage: 2.4 V
  • Heater Resistance: 74Ω at nominal power

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGas Sensor
Heater Voltage2.4 V
Heater Current32 mA
Heater Resistance74Ω at nominal power
Ambient Temperature (°C)-3o to 85 °C.
Heat Dissipation88 mW
Humidity Range55 -85 %RH
Storage Humidity5-9 %RH
Shipping Weight0.02 kg
Shipping Dimensions4 × 4 × 1 cm

Overview

The Amphenol SGX Multi-Gas Sensor NH3, Ethanol, H2, Propane, Iso-butane 300ppm is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Gas Sensor
  • Heater Voltage: 2.4 V (match this to your power supply; too high a voltage can damage the part)
  • Heater Current: 32 mA (your supply must deliver at least this much current)
  • Heater Resistance: 74Ω at nominal power
  • Ambient Temperature (°C): -3o to 85 °C.
  • Heat Dissipation: 88 mW
  • Humidity Range: 55 -85 %RH (quoted range is usually line-of-sight; walls and interference shorten it)
  • Storage Humidity: 5-9 %RH (space for firmware, files or media)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, 300 ppm Gas sensors (also known as gas detectors) are electronic devices that detect and identify different types of gasses. They are commonly used to detect toxic or explosive gasses and measure gas concentration. Electrochemical. Electrochemical gas detectors work by allowing gases to diffuse through a porous membrane to an electrode where it is either chemically oxidized or reduced. The amount of current produced is determined by how much of the gas is oxidized at the electrode, indicating the concentration of the gas. Gas sensors are devices that can detect the presence and concentration of various hazardous gases and vapors, such as toxic or explosive gases, volatile organic compounds (VOCs), humidity, and odors [1].

Features:

  1. Maximum heater power dissipation: 88mW
  2. Carbon monoxide CO 1 – 300 ppm
  3. Ethanol C2H5OH 10 – 300 ppm
  4. Hydrogen H2 1 – 300 ppm
  5. Ammonia NH3 1 – 300 ppm
  6. Methane CH4 >300 ppm
  7. Smallest footprint for compact designs (5 x 7 x 1.55 mm)
  8. Robust MEMS sensor for harsh environments
  9. High-volume manufacturing for low-cost applications
  10. Short lead-times

Note: For more Information refer to Datasheet


Packages Includes:

1 x AMPHENOL SGX SENSORTECH Gas Detection Sensor, Ammonia, Carbon Monoxide, Ethanol, Hydrogen, Methane, 300 ppm

Quick specs

Item Type
Gas Sensor
Heater Voltage
2.4 V
Heater Current
32 mA
Heater Resistance
74Ω at nominal power
Ambient Temperature (°C)
-3o to 85 °C.
Heat Dissipation
88 mW
See all specifications

Explore more