
1 / 5 · Click to enlarge
AI Summary
A solder-free Arduino starter kit built from plug-and-play Modulino sensor and output nodes connected over I2C with QWIIC cables. It lets beginners assemble working interactive projects quickly and then reuse the same modules in their own designs.
Key Highlights
- Solder-free Modulino nodes connect over I2C using QWIIC cables
- Includes movement, distance, temperature, knob, buzzer, pixels and buttons
- 3.3V operation suits beginners and a wide range of compatible devices
- Several nodes offer software-configurable I2C addresses for flexible builds
- Guided projects support first-time coders, classrooms and hobbyists
- Compact kit with a shipping weight of 0.45 kg
Ideal For
- Students learning programming and electronics for the first time
- Teachers building classroom sensor and coding demonstrations
- Hobbyists who want quick prototypes without soldering
- Makers exploring I2C sensors and modular project design
- Beginners moving from tutorials to their own interactive builds
Buying Tip
Confirm your Arduino board and software setup support the Modulino workflow and 3.3V I2C before buying, since the kit supplies the nodes but not the board.
Elecvora expert review
Our verdict
The Plug and Make Kit is a sensible entry point for anyone who wants working Arduino projects without soldering. Its modular nodes and QWIIC wiring make the first build fast, and the configurable addresses keep multi-module setups manageable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- No soldering or complex wiring required
- Broad mix of sensor and output nodes in one kit
- QWIIC connectors simplify each connection
- Several nodes allow software-configurable I2C addresses
- Guided projects suit beginners and classrooms
Cons
- An Arduino board and software setup are still required
- Only the listed modules are included, so expansion needs extra nodes
- 3.3V I2C means you must check compatibility with other hardware
Best for
Beginners, students and educators starting Arduino projects without soldering
Not ideal for
Makers who need high-power outputs or a soldered permanent circuit from day one
Specifications
| Shipping Weight | 0.45 kg |
|---|---|
| Shipping Dimensions | 18 × 18 × 12 cm |
What's in the box
- 1x Modulino Movement
- Further Modulino nodes as supplied by Arduino
Frequently Asked Questions
Do I need to solder anything to use this kit?
Which Arduino board should I use?
What voltage do the Modulino nodes run at?
Can I connect several nodes at the same time?
What sensors are included?
How should I store and handle the kit?
Overview
The Arduino Plug and Make Kit AKX00069 is designed for people who want to build interactive electronics without reaching for a soldering iron. The kit is organised around Modulino nodes, small modules that communicate over I2C through QWIIC connectors. You plug a node in with a cable, upload your code, and start experimenting. That approach removes much of the wiring friction that stops beginners before their first working project.
The mix of modules covers sensing and feedback: movement, distance, temperature, a rotary knob, a buzzer, RGB pixels and buttons. That range means you can build something that reacts to motion, measures its surroundings, responds to a turn of a dial, or lights up and beeps.
Key Features
- Modular design: combine Modulino nodes to build anything from a single-sensor experiment to a multi-module system.
- I2C over QWIIC: connections are made with standard QWIIC cables rather than loose wiring.
- 3.3V operation: all nodes are designed to run at a low, beginner-safe voltage.
- Configurable addresses: many nodes let you change their I2C address in software, so several can share a bus.
- Guided projects: step-by-step instructions help new coders get results early.
Specifications Explained
I2C over QWIIC is the backbone of the kit. Each node has a fixed or configurable address on the bus, and the QWIIC connector carries both power and data, so one cable per module is usually enough. Because addresses can be reassigned in software on many nodes, you are not locked into a single module per address.
3.3V operation matters for matching the kit to your board and for safe experimentation. The listed nodes include the Modulino Thermo with an HS3003 sensor at I2C address 68, Modulino Pixels with eight LC8822-2020 LEDs at address 0x6C, and Modulino Movement with an LSM6DSOXTR sensor at address 0x6A, configurable to 0x6B.
Compatibility and Requirements
The nodes use I2C over QWIIC and operate at 3.3V. You will need an Arduino board that supports the Modulino workflow and the Arduino software environment to write and upload code. The kit is supplied with its Modulino modules; check your board's logic level before connecting anything outside the kit.
Typical Uses
- First programming projects that respond to movement or distance
- Classroom demonstrations of sensors, inputs and outputs
- Temperature and environment experiments with visual feedback
- Interactive builds using the rotary knob, buzzer, pixels and buttons
- Prototyping ideas before committing to a permanent circuit
What's in the Box
The package includes 1x Modulino Movement and further Modulino nodes as supplied by Arduino. The movement node uses the LSM6DSOXTR sensor at I2C address 0x6A, configurable to 0x6B.














