
1 / 4 · Click to enlarge
At a glance
Made by Arduino, this portenta family is a good fit for makers, students and electronics hobbyists. Main specs: item type Breakout Board; model no. / name ASX00031; ethernet RJ45 up to 1Gb/s (Supported on Portenta X8 only).
Key Highlights
- Item Type: Breakout Board
- Model No. / Name: ASX00031
- Ethernet: RJ45 up to 1Gb/s (Supported on Portenta X8 only)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Breakout Board |
|---|---|
| Model No. / Name | ASX00031 |
| Ethernet | RJ45 up to 1Gb/s (Supported on Portenta X8 only) |
| Memory Slot | Micro SD card |
| Debugger | MIPI 20T JTAG with trace capability |
| Connector Type | HD male/female |
| RTC battery | CR2032 |
| Length (mm) | 164 mm |
| Width (mm) | 72 mm |
| Weight (g) | 69 gm |
| Shipping Weight | 0.18 kg |
| Shipping Dimensions | 22 × 13.6 × 6 cm |
Overview
The Official Arduino Portenta Breakout Dev & Test Board ASX00031, made by Arduino, is listed in our portenta family range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Breakout Board
- Model No. / Name: ASX00031
- Ethernet: RJ45 up to 1Gb/s (Supported on Portenta X8 only) (confirm your cable or board uses the same connector)
- Memory Slot: Micro SD card (more memory leaves room for larger programs and buffers)
- Debugger: MIPI 20T JTAG with trace capability
- Connector Type: HD male/female (confirm your cable or board uses the same connector)
- RTC battery: CR2032 (note the battery type so you can order spares or the right charger)
- Length (mm): 164 mm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Official Arduino Portenta Breakout Dev & Test Board ASX00031 is designed to prototype and test devices connections and capacity within the Portenta family boards. The board makes all high-density connectors' signals individually accessible. This allows a quick and easy connection to test external hardware components normally needed during development in the lab. This product is designed to work alongside the Portenta family.
- Product Development: The Portenta Breakout board reduces development time for industrial grade solution automation based on the Portenta line.
- Technical Education: The Portenta Breakout board can act as the first point of entry for technician education in industrial grade control and embedded systems.
Use your MKR board on Arduino's IoT Cloud, a simple and fast way to ensure secure communication for all of your connected Things.

Features:
- Power ON Button, Boot mode DIP switch
- Connectors: USBA, RJ45 GBit Ethernet, Micro SD card, OpenMV shutter module, MIPI 20T JTAG with trace capability
- Power: CR2032 RTC Lithium Battery backup, External power terminal block
- I/O Break out all Portenta High-Density connector signals, Male/female HD connectors allow interposing breakout between Portenta and shield to debug signals
- Compatibility: Standard Portenta High-Density connector pinout
- Safety information: Class A
Package Includes:
1 x Official Arduino Portenta Breakout Dev & Test Board ASX00031
Quick specs
- Item Type
- Breakout Board
- Model No. / Name
- ASX00031
- Ethernet
- RJ45 up to 1Gb/s (Supported on Portenta X8 only)
- Memory Slot
- Micro SD card
- Debugger
- MIPI 20T JTAG with trace capability
- Connector Type
- HD male/female


















