
1 / 3 · Click to enlarge
AI Summary
A compact photocell switch that turns outdoor lamps on at dusk and off at dawn using ambient light sensing. It runs on AC 220V, carries up to 10A, and mounts with a screw or wire fixing.
Key Highlights
- Turns connected lighting on and off automatically as daylight changes
- AC 220V input with up to 10A load current for outdoor fixtures
- Switches on near 16 lux and off below 70 lux
- Works on 50-60Hz mains supplies
- Compact 44 x 34 x 41 mm body weighing about 44g
- Colour-coded red, white and black leads simplify wiring
Ideal For
- Homeowners automating garden and pathway lamps
- Electricians maintaining street and security lighting
- Property managers reducing manual lighting checks
- Makers building dusk-to-dawn lighting projects
- Competent DIY users comfortable with AC 220V wiring
Buying Tip
Confirm your fixture runs on AC 220V and draws no more than 10A before ordering, since this module is not a universal-voltage unit.
Elecvora expert review
Our verdict
A simple, purpose-built photocell switch for AC 220V outdoor lighting. It does one job without extra settings, provided the load stays within 10A.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Straightforward dusk-to-dawn automation
- Handles loads up to 10A
- Clear colour-coded wiring
- Small housing with included mounting parts
Cons
- Not suitable for supplies other than AC 220V
- No adjustable light thresholds
- Requires mains wiring experience
Best for
Automating AC 220V street, garden and security lamps
Not ideal for
Low-voltage DC lighting or loads above 10A
Specifications
| Shipping Weight | 0.061 kg |
|---|---|
| Shipping Dimensions | 10 × 6.5 × 4 cm |
What's in the box
- 1 x AS06-2210E DC Photocell Street Lamp Switch Sensor
- Iron wire
- Wooden screw
Frequently Asked Questions
What supply voltage does the AS06-2210E need?
How much load can it switch?
When does it turn the lamp on and off?
How do I wire it?
What is included with the sensor?
Can I adjust the switching brightness?
Overview
The AS06-2210E is a photocell switch module built to take the manual work out of outdoor lighting. Instead of relying on timers or someone flipping a switch, it watches the ambient light level and changes the state of the connected circuit when the light crosses its sensing thresholds. That makes it a practical part for street lamps, garden lights and security fixtures that should only run after dark.
The module is compact at 44 x 34 x 41 mm and weighs roughly 44g, so it fits into many existing lamp housings and control boxes. It is supplied with iron wire and a wooden screw for mounting.
Key Features
- Automatic switching based on ambient light level
- AC 220V supply input
- Maximum load current of 10A
- Operating frequency range of 50-60Hz
- Turn-on illumination around 16 lux
- Turn-off illumination below 70 lux
- Red, white and black connection leads
- Screw or wire mounting options
Specifications Explained
Voltage and current
The unit is designed for an AC 220V supply and can switch loads drawing up to 10A. Before connecting a fixture, check that its supply and current draw fall within these figures.
Light thresholds
Around 16 lux the switch activates the load, which corresponds to dusk conditions. It releases the load when the measured level is below 70 lux. These values describe the light level at which the sensor responds, not the brightness of the lamp being controlled.
Frequency
A 50-60Hz rating means the module is intended for standard mains frequencies in that band.
Wiring colours
The leads are marked red for load, white for common and black for the power source. Following this convention keeps the installation predictable.
Compatibility and Requirements
Use the AS06-2210E only with an AC 220V supply and a connected load that does not exceed 10A. The supply frequency should be within 50-60Hz. The module is not a dimmer or a programmable timer; it simply switches the circuit according to ambient light. Mount it where the sensor can see natural daylight rather than the light from the lamp it controls.
Typical Uses
- Street and pathway lighting
- Garden and yard lamps
- Security and perimeter lighting
- Any outdoor fixture that should run from dusk to dawn
What's in the Box
1 x AS06-2210E DC Photocell Street Lamp Switch Sensor, plus iron wire and a wooden screw for mounting.













