
1 / 3 · Click to enlarge
AI Summary
A compact inline mass flow controller for non-corrosive gases, featuring MEMS sensing and RS485 Modbus RTU communication. It provides stable, fast-response flow regulation for lab and industrial automation systems.
Key Highlights
- MEMS sensor technology for accurate gas flow measurement
- RS485 Modbus RTU digital communication interface
- Wide 12 to 24 VDC operating voltage range
- Stainless steel housing for durability
- Compact 78 x 72 mm inline form factor
- Customizable digital signal output
Ideal For
- Laboratory researchers needing precise gas flow control
- Industrial automation engineers integrating Modbus devices
- Environmental monitoring technicians
- Analytical instrument developers
- Process control system integrators
Buying Tip
Verify that your gas is non-corrosive and your control system supports RS485 Modbus RTU before ordering.
Elecvora expert review
Our verdict
The ASAIR AMC2100 offers a solid balance of accuracy, build quality, and digital integration for non-corrosive gas flow control. Its Modbus RTU interface and compact stainless steel body make it a practical choice for automation projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Fast response and stable readings from MEMS sensor
- RS485 Modbus RTU simplifies integration
- Rugged stainless steel housing
- Customizable digital output
- Wide 12-24 VDC input range
Cons
- Limited to non-corrosive gases only
- No analog output option listed
- Operating temperature range may not suit extreme environments
Best for
Laboratory and industrial gas flow control with Modbus networks
Not ideal for
Corrosive gas applications or systems without RS485 support
Specifications
| Model No. / Name | Gas Flow Controller |
|---|---|
| Operating Voltage (VDC) | 12 to 24 |
| Dielectric Strength | 500 VAC for 1 minute |
| Communication Interface | RS485, Modbus RTU |
| Signal Output | Digital, customizable |
| Operating Temperature (°C) | -10 to 55 |
| Mounting Type | Inline |
| Material | Stainless Steel housing |
| Length (mm) | 78 |
| Width (mm) | 72 |
| Weight (g) | 333 |
| Shipping Weight | 0.477 kg |
| Shipping Dimensions | 17 × 15 × 7 cm |
What's in the box
- 1 x ASAIR AMC2100 Series Mass Flow Controller
- 1 x connecting cable
Frequently Asked Questions
What types of gases can I use with this controller?
What power supply does it require?
How do I connect it to my control system?
Is the output signal customizable?
What is included in the package?
What maintenance does it need?
Overview
The ASAIR AMC2100 Series Mass Flow Controller is designed for precise measurement and control of non-corrosive gases in laboratory, environmental, and industrial settings. It uses MEMS sensor technology to deliver fast response and excellent stability, reducing drift over long periods. The inline stainless steel housing measures 78 mm in length and 72 mm in width, weighing 333 g, so it integrates easily into existing gas lines without taking up much space.
Key Features
- MEMS sensing: Provides high accuracy and repeatability for gas flow control.
- Digital communication: RS485 with Modbus RTU protocol enables straightforward integration with PLCs and automation systems.
- Customizable output: Digital signal output can be tailored to match specific system requirements.
- Robust build: Stainless steel housing withstands demanding laboratory and industrial environments.
- Wide voltage range: Operates on 12 to 24 VDC for flexibility in power supply design.
- Compact size: Inline mounting and small footprint simplify installation.
Specifications Explained
The 12 to 24 VDC operating voltage means the controller can run from common industrial power supplies, giving you flexibility during integration. RS485 Modbus RTU is a widely used industrial protocol, so the device can communicate with most PLCs, HMIs, and data loggers without special adapters. The digital output is customizable, allowing you to match signal formats to your control system. With a 500 VAC dielectric strength for one minute, the unit offers basic electrical isolation for safety. The operating temperature range of -10 to 55 °C covers typical indoor and sheltered environments. The stainless steel housing resists corrosion and protects the internal sensor, while the 333 g weight and compact dimensions make mounting straightforward.
Compatibility and Requirements
The AMC2100 is intended for non-corrosive gases only. It requires a 12 to 24 VDC power supply and a host device that supports RS485 Modbus RTU communication. The inline mounting type means it fits into standard gas tubing runs. No additional software is required for basic operation, though configuration of the customizable output may need access to the Modbus registers. Ensure your system provides the correct voltage and communication interface before installation.
Typical Uses
This controller is well suited to scientific research setups where precise gas mixtures are needed, environmental monitoring systems that require reliable flow data, and industrial process control where automated gas regulation is essential. It can also be used in analytical instruments, calibration rigs, and pilot plants that demand stable, repeatable gas flow.
What's in the Box
1 x ASAIR AMC2100 Series Mass Flow Controller, 1 x connecting cable.
Quick specs
- Model No. / Name
- Gas Flow Controller
- Operating Voltage (VDC)
- 12 to 24
- Dielectric Strength
- 500 VAC for 1 minute
- Communication Interface
- RS485, Modbus RTU
- Signal Output
- Digital, customizable
- Operating Temperature (°C)
- -10 to 55


















