Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Atten ST-1101 Fume Extractor removes soldering fumes and fine particles with a 160W brushless motor and triple filter design. Its adjustable airflow and flexible pipe make it easy to direct suction right where you need it.

Key Highlights

  • 160W brushless DC motor with built-in controller for consistent performance
  • 240m3/h airflow with adjustable suction to match the task
  • Triple filter design captures particles layer by layer
  • Durable metal frame with side handles for easy repositioning
  • Flexible pipe directs extraction precisely where needed
  • Separate filter replacement for lower maintenance cost

Ideal For

  • Electronics technicians and repair shops
  • DIY makers and hobbyists
  • Laser engraving workshops
  • Educational electronics labs
  • Anyone soldering in a confined workspace

Buying Tip

Check that your workspace has a 230V power outlet, as this model is designed for 230V input.

Elecvora expert review

Our verdict

The Atten ST-1101 Fume Extractor offers solid build quality and effective triple-stage filtration in a compact footprint. Its adjustable airflow and flexible pipe make it a practical choice for soldering benches where fume control is essential.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Durable metal frame with easy-to-move handles
  • Adjustable airflow for different tasks
  • Triple filter design with separate replacement stages
  • Flexible pipe directs suction precisely

Cons

  • Requires a 230V power supply, limiting use in 110V regions
  • Filters are not included in the box beyond what is pre-installed

Best for

Electronics workbenches with 230V power

Not ideal for

Users in regions with 110V mains without a step-up transformer

Specifications

Item TypeAccessory
Model No. / NameFume Extractor
ColorBlack
Input Voltage230
Power Consumption160w
Air Flow240m3/H(土10%)
Length (mm)465
Width (mm)250
Weight (g)17,000
Shipping Weight18 kg
Shipping Dimensions62 × 56 × 56 cm

What's in the box

  • 1 x Atten ST-1101 Fume Extractor

Frequently Asked Questions

What voltage does the Atten ST-1101 require?
The ST-1101 is designed for 230V input. Do not connect it to a different voltage without a suitable transformer.
How often should I replace the filters?
Filter life depends on usage and the amount of fume produced. Replace the pre-filter, middle filter, or main filter when you notice reduced suction or visible contamination.
Can I use this extractor for laser engraving?
Yes, the ST-1101 is suitable for laser engraving and other smoke-producing tasks, as long as the fumes are within the filter's capabilities.
What is included in the box?
The package includes 1 x Atten ST-1101 Fume Extractor. Filters are pre-installed; no additional accessories are listed.
How do I adjust the suction power?
Use the limit governor to adjust air volume and flow according to your needs.
Is the flexible pipe extendable?
The flexible pipe can change direction and position. The length can be customized, but the standard length is as supplied.

Overview

The Atten ST-1101 Fume Extractor is a dependable accessory for any electronics workspace where soldering or other smoke-producing tasks take place. Its integrated metal frame construction provides durability, while the concave plastic handles on both sides make it stable and easy to move around the bench. The unit is powered by a brushless DC motor and an internal controller, ensuring reliable performance and a long service life.

Key Features

  • Adjustable airflow: A limit governor lets you tune air volume and flow to suit different applications, from delicate soldering to heavier fume removal.
  • Triple filtration: Pre-filter, middle filter, and main filter work together to capture harmful dust and fumes, achieving a purification rate of up to 99.97%.
  • Corrosion-resistant wind wheel: Made from a special alloy and dynamically balanced for stable, quiet operation with high suction.
  • Flexible pipe: The pipe can be repositioned to direct extraction exactly where needed, with no additional ducting required.
  • Easy maintenance: Each filter stage can be replaced separately, extending product life and reducing replacement costs.

Specifications Explained

Power and airflow: With a 160W motor and 240m3/h airflow (within 10% tolerance), the ST-1101 provides strong suction for its size. The 230V input voltage is standard for many regions; check your local mains voltage before use.

Dimensions and weight: Measuring 465mm in length and 250mm in width, and weighing 17kg, the unit is compact enough for desktop placement yet heavy enough to stay stable during operation.

Filter design: The three-stage filtration system traps particles progressively, ensuring thorough removal of harmful dust. Separate replacement of each filter stage keeps long-term costs down.

Compatibility and Requirements

The ST-1101 requires a 230V power supply. It is designed as a standalone accessory for electronics workbenches and does not require additional ducting thanks to its flexible pipe. No other compatibility information is specified.

Typical Uses

  • Electronics soldering and rework stations
  • Laser engraving and cutting
  • Other smoke-producing tasks in workshops
  • DIY and professional electronics labs

What's in the Box

1 x Atten ST-1101 Fume Extractor

Quick specs

Item Type
Accessory
Model No. / Name
Fume Extractor
Color
Black
Input Voltage
230
Power Consumption
160w
Air Flow
240m3/H(土10%)
See all specifications