Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Axisflying AF310 3010 is a 1210 KV brushless motor for 7-9 inch cinelifter and cinematic drones. Its 30x10 stator delivers the smooth, stable thrust needed for carrying camera payloads.

Key Highlights

  • 1210 KV winding for controlled cinematic thrust
  • 30x10 stator size for payload-friendly torque
  • Rated for 22.2 V input on 6S-class builds
  • Weighs approximately 45 g per motor
  • Suited to 7-9 inch propellers on cinelifter frames
  • Brushless design for efficiency and long service life

Ideal For

  • Cinelifter builders running 7-9 inch propellers
  • Aerial filmmakers carrying camera payloads
  • FPV pilots moving to larger cinematic frames
  • Professional aerial photography setups
  • Hobbyists building stable video platforms

Buying Tip

Check your frame's motor mount pattern and confirm your build runs a 22.2 V power system before ordering, since this is a single motor and you will need one per arm.

Elecvora expert review

Our verdict

The AF310 3010 is a focused cinelifter motor that trades top-end speed for the torque and smoothness larger camera frames need. Its 30x10 stator and 1210 KV winding make it a logical pick for 7-9 inch builds where stable footage matters most.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Torque-friendly 30x10 stator for payload work
  • 1210 KV winding supports smooth throttle control
  • Reasonable 45 g weight per motor
  • Brushless design for durability and efficiency
  • Clear 22.2 V input rating simplifies power planning

Cons

  • Sold as a single motor, so a full build needs several
  • Not aimed at high-speed racing setups
  • Requires suitable ESCs and frame mounting to match

Best for

7-9 inch cinelifter and cinematic drone builds

Not ideal for

Pilots chasing maximum top speed on small racing quads

Specifications

Model No. / NameAxisflying AF310 3010
Motor Stator Size30*10
Input Voltage22.2
Weight (g)45
Shipping Weight0.13 kg
Shipping Dimensions9 × 7 × 5 cm

What's in the box

  • 1 x Axisflying AF310 3010 brushless FPV motor, 1210 KV

Frequently Asked Questions

What size propellers is this motor intended for?
The AF310 3010 is designed for 7 to 9 inch propellers, which suits cinelifter and cinematic drone frames.
What voltage does the motor run on?
It is rated for 22.2 V input, so your battery and ESC selection should match that voltage class.
How much does one motor weigh?
Each motor weighs approximately 45 g, which you should factor into the overall build weight.
How many motors come in the package?
The package contains one motor, so a quad build requires four separate units.
What is the stator size and why does it matter?
The stator measures 30x10. A larger stator generally provides more torque, which helps when lifting camera payloads.
Can this motor be used for freestyle flying?
It is primarily intended for cinematic builds, but it can be adapted to larger FPV freestyle frames where the prop size and voltage match.

Overview

The Axisflying AF310 3010 is a brushless FPV motor built around cinematic flight rather than outright speed. With a 1210 KV winding and a 30x10 stator, it is intended for multirotors spinning 7 to 9 inch propellers, where steady lift and predictable response matter more than raw RPM. The motor is rated for 22.2 V input and weighs roughly 45 g, making it a practical choice for cinelifter builds that need to carry camera gear without upsetting balance.

Key Features

  • Brushless construction: fewer wearing parts, smoother operation and longer service life than brushed motors.
  • Cinelifter-focused winding: the 1210 KV rating favours torque and control over top-end speed.
  • 30x10 stator: a larger stator format that supports stable thrust for heavier frames.
  • 22.2 V input: matched to 6S-class cinematic power setups.
  • Light footprint: about 45 g per motor keeps the overall build weight in check.

Specifications Explained

1210 KV describes how fast the motor turns per volt applied. A lower KV figure like this suits larger propellers, giving smoother acceleration and finer throttle resolution, which is exactly what aerial filming needs.

30x10 stator size refers to the stator's diameter and height. The larger dimensions translate into more magnetic material and therefore more torque, helping the motor hold steady under the load of a camera rig.

22.2 V input indicates the voltage class the motor is designed around. Builders should match their power system to this rating rather than exceeding it.

45 g weight is the motor alone. Multiply by four for a quad and factor it into your thrust-to-weight planning before choosing props.

Compatibility and Requirements

This motor is intended for frames that accept 7 to 9 inch propellers, typically cinelifter and cinematic drone builds. It is rated for 22.2 V input, so the battery and ESC selection should align with that voltage class. The AF310 3010 is a single motor, so a complete build needs one per arm plus the usual ESCs, flight controller and power system. Confirm your frame's motor mounting pattern and prop size before ordering.

Typical Uses

Filmmakers and content creators use motors in this class for smooth, stable video capture with camera payloads. The same motor can also be adapted to larger FPV freestyle and racing frames, and to aerial photography rigs used in commercial or professional work.

What's in the Box

  • 1 x Axisflying AF310 3010 brushless FPV motor, 1210 KV

Quick specs

Model No. / Name
Axisflying AF310 3010
Motor Stator Size
30*10
Input Voltage
22.2
Weight (g)
45
Shipping Weight
0.13 kg
Shipping Dimensions
9 × 7 × 5 cm
See all specifications