Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An enclosed FDM 3D printer with the Bambu AMS for multi-colour printing, a 256 x 256 x 256 mm build and a 300 C hotend. It reaches 500 mm/s with up to 20,000 mm/s2 acceleration, so detailed and engineering-filament jobs finish faster.

Key Highlights

  • Enclosed plastic and glass shell retains heat for ABS, ASA, PA, PC and PET
  • AMS enables multi-colour and multi-material printing from one setup
  • 256 x 256 x 256 mm build volume with 300 C all-metal hotend
  • 500 mm/s tool head speed and up to 20,000 mm/s2 acceleration
  • Built-in 1280 x 720 camera for remote checks and timelapse capture
  • Supports 0.2, 0.4, 0.6 and 0.8 mm nozzles plus four Bambu plate types

Ideal For

  • Makers printing functional parts in ABS, ASA and PC
  • Designers producing multi-colour prototypes and models
  • Small studios running short production batches
  • Hobbyists who want an enclosed printer with remote monitoring
  • Workshops needing jigs, fixtures and replacement brackets

Buying Tip

Check that your workspace can supply the printer's 1000 W draw at 220 V (350 W at 110 V) and leave clearance around the enclosed frame for the AMS and cable routing.

Elecvora expert review

Our verdict

The P1S Combo pairs an enclosed chamber with the AMS, giving buyers both engineering-filament capability and multi-colour output in one purchase. Its 500 mm/s motion system and 300 C hotend make it a strong fit for anyone moving up from an open-frame printer.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Enclosed plastic and glass body supports ABS, ASA, PA, PC and PET
  • AMS included for multi-colour and multi-material printing
  • 500 mm/s speed with up to 20,000 mm/s2 acceleration
  • Built-in camera for remote monitoring and timelapse
  • Four nozzle sizes and four Bambu plate types supported

Cons

  • Needs a 1000 W supply at 220 V, so check your circuit
  • TPU and other flexible filaments demand careful AMS routing
  • Camera records timelapse at only 0.5 fps

Best for

Makers and small studios wanting enclosed, multi-colour FDM printing

Not ideal for

Buyers who only need a basic open-frame PLA printer

Specifications

Model No. / NameP1S Combo
Printer TypeFDM
Print Size (L x W x H) (mm)256 x 256 x 256
Filament SupportsABS, ASA, PA, PC, PET, PETG, PLA, PVA, TPU
Supported Nozzle Diameter (mm)0.2 / 0.4 / 0.6 / 0.8
Hotend Temperature (°C)300 °C
ConnectivityWi-Fi, Bluetooth, Bambu-Bus
Printing Speed500
Shell MaterialEnclosed (Plastic & Glass)
Plate TypeBambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate
Camera DetailsLow Rate Camera 1280 x 720/0.5fps Timelapse Supported
Shipping Weight22.26 kg
Shipping Dimensions60 × 50 × 50 cm

What's in the box

  • 1 x Bambu Lab P1S Combo 3D Printer
  • 1 x Bambu Lab AMS
  • 2 x Spare Filament Cutter
  • 1 x Bambu Bus Cable - 6 Pin
  • 1 x Bambu Bus Cable - 4 Pin

Frequently Asked Questions

Which filaments can the P1S Combo print?
It supports PLA, PETG, ABS, ASA, PA, PC, PET, PVA and TPU. The enclosed chamber is particularly useful for the higher-temperature engineering materials on that list.
What nozzle sizes are supported?
The printer accepts 0.2, 0.4, 0.6 and 0.8 mm nozzles. Use the smaller sizes for fine detail and the larger ones for faster, thicker extrusion.
What are the power requirements?
It runs on 100-240 VAC, 50/60 Hz, drawing 1000 W at 220 V and 350 W at 110 V. Confirm your outlet and circuit can handle that load.
Does the combo include the AMS?
Yes. The package includes one Bambu Lab AMS along with two spare filament cutters and the 6-pin and 4-pin Bambu Bus cables.
Can I monitor prints remotely?
Yes. The built-in 1280 x 720 camera works with Bambu Studio for remote checks and timelapse capture at 0.5 fps.
Which build plates work with this printer?
It is compatible with the Bambu Textured PEI Plate, Cool Plate, Engineering Plate and High Temperature Plate. Match the plate to the filament you are using.

Overview

The Bambu Lab P1S Combo brings together an enclosed FDM printer and the Bambu AMS in one package. The sealed plastic and glass body keeps the print chamber warm, which helps when you run engineering materials such as ABS, ASA, PA, PC, PET and PETG. With the AMS attached, you can feed multiple filaments and print colour or material changes without stopping to swap spools by hand.

The build area measures 256 x 256 x 256 mm, giving room for functional parts, prototypes, enclosures and multi-part plates. A 300 C all-metal hotend and stainless steel nozzle handle the listed filament range, while the tool head can travel at 500 mm/s with acceleration up to 20,000 mm/s2.

Key Features

  • Enclosed chamber: plastic and glass shell supports high-temperature filament printing.
  • AMS included: multi-colour and multi-material capability from a single setup.
  • Fast motion system: 500 mm/s print speed and up to 20,000 mm/s2 acceleration.
  • Remote visibility: low-rate 1280 x 720 camera with 0.5 fps timelapse support and Bambu Studio integration.
  • Flexible plates: compatible with Bambu Textured PEI, Cool, Engineering and High Temperature plates.
  • Filament sensing: run-out sensor helps you catch empty spools before a print fails.

Specifications Explained

Build volume and nozzles

The 256 x 256 x 256 mm cube suits most desktop parts. Four nozzle diameters (0.2, 0.4, 0.6 and 0.8 mm) let you choose fine detail with the 0.2 mm option or faster, thicker extrusion with the larger sizes. The 300 C hotend ceiling covers the full listed filament range.

Speed and acceleration

A 500 mm/s tool head speed combined with up to 20,000 mm/s2 acceleration means the printer spends less time on travel and more on laying plastic. In practice, this shortens turnaround on prototypes and batch plates.

Enclosure and plates

The enclosed body holds warmth around the part, which is useful for materials prone to warping. Plate choice matters too: the Textured PEI plate gives a textured first layer, the Cool Plate suits lower-temperature materials, the Engineering Plate is aimed at engineering filaments and the High Temperature Plate handles hotter jobs.

Connectivity and camera

Wi-Fi, Bluetooth and Bambu-Bus connectivity let the printer talk to the AMS and to Bambu Studio. The built-in 1280 x 720 camera records timelapses at 0.5 fps and lets you check progress remotely.

Compatibility and Requirements

The P1S Combo supports PLA, PETG, ABS, ASA, PA, PC, PET, PVA and TPU filaments. It accepts 0.2, 0.4, 0.6 and 0.8 mm nozzles and the four Bambu plate types listed above. Electrical requirements are 100-240 VAC, 50/60 Hz, drawing 1000 W at 220 V and 350 W at 110 V.

Typical Uses

  • Functional prototypes and mechanical parts in ABS, ASA or PC
  • Multi-colour models, signage and decorative prints with the AMS
  • Workshop jigs, fixtures and replacement brackets
  • Design studio and small-batch production work
  • Remote-monitored overnight prints with timelapse records

What's in the Box

  • 1 x Bambu Lab P1S Combo 3D Printer
  • 1 x Bambu Lab AMS
  • 2 x Spare Filament Cutter
  • 1 x Bambu Bus Cable - 6 Pin
  • 1 x Bambu Bus Cable - 4 Pin

Quick specs

Model No. / Name
P1S Combo
Printer Type
FDM
Print Size (L x W x H) (mm)
256 x 256 x 256
Filament Supports
ABS, ASA, PA, PC, PET, PETG, PLA, PVA, TPU
Supported Nozzle Diameter (mm)
0.2 / 0.4 / 0.6 / 0.8
Hotend Temperature (°C)
300 °C
See all specifications