
1 / 8 · Click to enlarge
AI Summary
An enclosed FDM 3D printer with a 256 × 256 × 256 mm build volume, 300 °C hotend and print speeds up to 600 mm/s. The combo adds the AMS 2 Pro for automatic multi-filament switching and active drying.
Key Highlights
- 256 × 256 × 256 mm build volume for large functional parts
- 300 °C hotend with PMSM servo direct-drive extruder
- Print speeds up to 600 mm/s with high acceleration
- AMS 2 Pro enables automatic filament switching and active drying
- Built-in camera with AI-based real-time print failure detection
- 5-inch touchscreen with second-generation interface
Ideal For
- Designers and engineers printing functional prototypes
- Small studios running short production batches
- Makers working with ABS, ASA, PC and composite filaments
- Hobbyists who want multi-colour prints without manual spool changes
- Workshops needing fast turnaround on jigs and fixtures
Buying Tip
Check that the 392 × 406 × 478 mm footprint and 21.3 kg shipping weight suit your bench and that you have 1.75 mm filament in the materials you plan to print before the printer arrives.
Elecvora expert review
Our verdict
The P2S-Combo is a well-rounded enclosed FDM package: a large build volume, a 300 °C hotend and a broad engineering-filament list, plus the AMS 2 Pro for multi-material work. It rewards users who want speed and repeatability without building a printer from scratch.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 256 × 256 × 256 mm build volume suits large functional parts
- 300 °C hotend and 110 °C heatbed cover engineering filaments
- Speeds up to 600 mm/s shorten prototype turnaround
- AMS 2 Pro adds automatic switching and active drying
- Camera-based AI monitoring and a 5-inch touchscreen simplify long prints
Cons
- Single extruder, so multi-material work depends on the AMS 2 Pro
- 21.3 kg shipping weight and a 392 × 406 × 478 mm frame need dedicated bench space
- Enclosed chamber is beneficial but adds bulk compared with open-frame printers
Best for
Engineers, designers and studios printing functional parts and multi-colour models
Not ideal for
Buyers wanting a tiny, portable open-frame printer or the lowest possible entry cost
Specifications
| Model No. / Name | P2S-Combo |
|---|---|
| Printer Type | FDM |
| Print Size (L x W x H) (mm) | 256 x 256 x 256 |
| Filament Supports | PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF |
| Supported Nozzle Diameter (mm) | 0.2 / 0.4 / 0.6 / 0.8 |
| Hotend Temperature (°C) | 300 °C |
| Connectivity | USB + WIFI |
| Filament Diameter | 1.75 |
| Chassis | Plastic and Glass |
| Machine Size (mm) | 392 × 406 × 478 |
| Printing Speed | Up to 600 |
| No. of Extruders | 1 |
| Extruder Type | PMSM servo direct-drive extruder (standard on P2S) |
| Heatbed Temperature | Up to 110 |
| Printbed Temperature (°C) | Up to 110 |
| Screen Type | " 5 Touchscreen |
| Shipping Weight | 21.3 kg |
| Shipping Dimensions | 56 × 49 × 49 cm |
What's in the box
- 1 x Bambu Lab P2S-Combo 3D Printer
- 1 x AMS 2 Pro (combo version)
- 1 x Buildplate
- 1 x Filament Buffer (combo version)
- 1 x Accessory Box
- 1 x Spool Holder
Frequently Asked Questions
What materials can the P2S-Combo print?
What nozzle sizes are supported?
How does it connect to a computer or network?
What is included in the combo version?
What are the maximum temperatures?
How much space do I need for it?
Overview
The Bambu Lab P2S-Combo is a fully enclosed FDM 3D printer aimed at makers who need dependable results rather than constant tinkering. A 256 × 256 × 256 mm build area gives you room for large single-piece models or batches of smaller parts, while the plastic-and-glass chassis helps hold chamber conditions steady when you move beyond PLA into engineering materials.
This combo version ships with the AMS 2 Pro, which handles automatic filament switching and active drying, so multi-material and multi-colour work becomes a workflow rather than a manual chore.
Key Features
- Enclosed build chamber: plastic and glass construction supports stable printing of ABS, ASA, PC and nylon-type materials.
- High-speed motion: print speeds up to 600 mm/s with high acceleration shorten turnaround on prototypes.
- PMSM servo direct-drive extruder: precise filament control from a single extruder.
- 300 °C hotend: covers standard and engineering filaments, with nozzle diameters of 0.2, 0.4, 0.6 and 0.8 mm.
- AI-based monitoring: the built-in camera watches for print failures in real time.
- Adaptive cooling and filtration: airflow system paired with an activated carbon filter.
- Quick-swap hotend: nozzle changes are fast, which matters when switching between detail and draft work.
Specifications Explained
Build volume and nozzle sizes
At 256 × 256 × 256 mm, the build volume suits helmet sections, brackets, jigs and multi-part assemblies. Nozzle options from 0.2 mm to 0.8 mm let you trade surface finish for speed: 0.2 mm for fine detail, 0.4 mm as an all-round choice, and 0.6 or 0.8 mm for fast, strong prototypes.
Temperatures
The 300 °C hotend and heatbed up to 110 °C open the door to PLA, PETG, ABS, ASA, TPU, PET, PA, PC, PVA and a long list of carbon-fibre and glass-fibre composites including PLA-CF, PETG-CF, PA6-CF and PPA-CF.
Speed and control
Speeds up to 600 mm/s are paired with a 5-inch touchscreen running a second-generation interface, so job setup and monitoring stay straightforward. Connectivity is USB and Wi-Fi.
Physical footprint
The machine measures 392 × 406 × 478 mm and uses 1.75 mm filament. Shipping weight is 21.3 kg in a 56 × 49 × 49 cm carton, so plan a sturdy surface and a second pair of hands for unboxing.
Compatibility and Requirements
The P2S-Combo accepts 1.75 mm filament and the material list above, with supported nozzle diameters of 0.2, 0.4, 0.6 and 0.8 mm. It connects over USB or Wi-Fi. The AMS 2 Pro included in the combo handles automatic filament switching and drying.
Typical Uses
Functional engineering parts, jigs and fixtures, product prototypes, multi-colour display models, replacement components and workshop aids. The enclosed chamber and engineering-filament support make it a practical choice for small production runs and design studios.
What's in the Box
- 1 × Bambu Lab P2S-Combo 3D Printer
- 1 × AMS 2 Pro (combo version)
- 1 × Buildplate
- 1 × Filament Buffer (combo version)
- 1 × Accessory Box
- 1 × Spool Holder


Quick specs
- Model No. / Name
- P2S-Combo
- Printer Type
- FDM
- Print Size (L x W x H) (mm)
- 256 x 256 x 256
- Filament Supports
- PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
- Supported Nozzle Diameter (mm)
- 0.2 / 0.4 / 0.6 / 0.8
- Hotend Temperature (°C)
- 300 °C






















