
1 / 4 · Click to enlarge
AI Summary
This parallel charging board combines XT30, XT60, XT90, JST and T plugs on one panel for charging multiple 2-6S LiPo packs at once. It uses 14AWG silicone cable and accepts 4.0mm banana or XT60 input, making it compatible with many popular chargers.
Key Highlights
- Five connector types on one board: XT30, XT60, XT90, JST and T plug
- Supports parallel charging of 2-6S lithium batteries
- 14AWG silicone cable for heavy current handling
- Input via 4.0mm banana plug or XT60 connector
- Compatible with iMax B6/B6AC, ISDT, HOTA and similar chargers
- Compact board keeps charging setups tidy and organised
Ideal For
- FPV pilots charging multiple 2-6S LiPo packs
- RC car and truck hobbyists with T-plug or XT60 batteries
- Drone racers who need fast parallel charging at the field
- Hobbyists with mixed battery connector types
- Users of iMax B6/B6AC, ISDT or HOTA chargers
Buying Tip
Confirm that your charger has a 4.0mm banana or XT60 output and that your battery packs use one of the board’s connectors before buying.
Elecvora expert review
Our verdict
This parallel charging board is a practical, no-fuss accessory for hobbyists who regularly charge multiple 2-6S packs. The five connector types and 14AWG cable make it a versatile addition to any charging setup.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Covers five common connector types on one board
- 14AWG silicone cable handles higher currents
- Dual input options (4.0mm banana and XT60)
- Compact and lightweight for transport
Cons
- Requires a compatible charger with 4.0mm banana or XT60 output
- No built-in balance ports or fusing mentioned
- Parallel charging requires batteries of same cell count and similar voltage
Best for
Hobbyists who want to parallel charge multiple 2-6S LiPo packs with mixed connectors
Not ideal for
Users who need individual cell balancing or charge batteries of different cell counts simultaneously
Specifications
| Shipping Weight | 0.1 kg |
|---|---|
| Shipping Dimensions | 9 × 8 × 6 cm |
What's in the box
- 1 x Battery Charger Board XT90 XT60 XT30 JST T Plug
Frequently Asked Questions
What types of batteries can I charge with this board?
Which chargers are compatible with this board?
How do I connect the board to my charger?
Can I charge different cell counts at the same time?
What is included in the package?
How should I care for the board?
Overview
The Generic XT90 XT60 XT30 JST T Plug Battery Charger Board is a multi-connector parallel charging solution for hobbyists who own lithium battery packs with different plug types. Instead of juggling multiple adapter leads, you get XT30, XT60, XT90, JST and T connectors all on one board, ready for parallel charging of 2-6S packs. The board is wired with 14AWG silicone cable, which is suitable for higher currents, and it accepts power input through a 4.0mm banana plug or an XT60 connector. This makes it a versatile accessory for chargers such as the iMax B6/B6AC, ISDT and HOTA series.
Key Features
- Multi-connector layout: XT30, XT60, XT90, JST and T plugs are integrated into a single board, covering the most common battery connectors in RC and FPV hobbies.
- 2-6S parallel charging: Designed to charge multiple lithium battery packs of the same cell count in parallel, saving time at the field or workbench.
- 14AWG silicone cable: Thick, flexible cable that can handle demanding currents without excessive resistance.
- Flexible input options: Connect your charger via a 4.0mm banana plug or an XT60 plug, depending on what your charger provides.
- Compact footprint: The board measures approximately 9 × 8 × 6 cm and weighs around 0.1 kg, so it stores easily in a toolbox or flight case.
Specifications Explained
2-6S support means the board is intended for lithium battery packs with 2 to 6 cells in series. Always connect packs of the same cell count and similar voltage level when parallel charging. 14AWG silicone cable is a thicker gauge that helps reduce resistance and heat under load, which is important when charging at higher currents. The 4.0mm banana plug and XT60 input give you two ways to link the board to your charger, so you can use it with a wide range of models. The shipping weight of 0.1 kg and dimensions of 9 × 8 × 6 cm indicate a small, lightweight accessory that is easy to carry.
Compatibility and Requirements
This board is compatible with chargers that use a 4.0mm banana plug or XT60 output, including the iMax B6/B6AC, ISDT and HOTA series. It supports 2-6S lithium batteries and provides XT30, XT60, XT90, JST and T plug connections. You will need a compatible charger and battery packs with matching connectors to use the board. No additional cables are required beyond what your charger provides, but always check that your charger’s output connector matches one of the board’s input options.
Typical Uses
This charging board is ideal for FPV pilots who fly 2-6S LiPo packs with XT30, XT60 or XT90 connectors, RC car and truck drivers using T-plug or XT60 batteries, and hobbyists with a mix of JST and other small connectors. It is also useful for anyone who wants to parallel charge several batteries at once to save time before a flying session or race day.
What's in the Box
1 x Battery Charger Board XT90 XT60 XT30 JST T Plug.













