
1 / 9 · Click to enlarge
AI Summary
The Beitian BN-220 is a tiny GPS/GLONASS module with TTL serial output, perfect for adding precise positioning to RC drones or Raspberry Pi. Its fast hot start and wide voltage range make integration simple.
Key Highlights
- Dual GPS and GLONASS support for reliable positioning
- Compact 22 x 20 x 6 mm module weighs only 5.3 grams
- TTL serial output (TX/RX) for easy connection
- Wide 3.0V to 5.5V input voltage range
- Fast hot start in just 1 second
- LED indicators for power and fix status
Ideal For
- FPV drone pilots adding GPS for return-to-home
- Raspberry Pi enthusiasts needing location data
- RC aircraft hobbyists building lightweight models
- DIY electronics projects requiring GPS/GLONASS
- Students learning about GPS integration
Buying Tip
Check that your flight controller or microcontroller supports TTL serial GPS input and that you have a matching 1.00mm pitch connector or plan to solder directly.
Elecvora expert review
Our verdict
The Beitian BN-220 is a solid, no-frills GPS module that delivers dependable positioning for small drones and DIY electronics. Its lightweight design and wide voltage range make it easy to integrate, though users should be comfortable with soldering or sourcing the right connector.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact and lightweight
- Fast hot start and good sensitivity
- Wide input voltage range
- Clear LED status indicators
Cons
- No cables or connectors included
- Requires soldering or a matching 1.00mm pitch socket
- Documentation may be limited
Best for
RC drone and Raspberry Pi projects needing a small, reliable GPS module
Not ideal for
Users who need plug-and-play installation with included cables
Specifications
| Item Type | GPS Antenna, GPS Module |
|---|---|
| Electrical Characteristics | Chipset: 8030-KT |
| Additional Specs. | Acquisition Time: Cold start: 26s Warm start: 25s Hot start: 1s |
| Output Voltage | 5V |
| Connector Type | 1.00mm spacing between the 4pins patch seat |
| Wiring | GND,TX output,RX input,VCC(3.0v-5.5v) |
| Dimensions (L x W x H) mm | 22 x 20 x 6 |
| Current | Capture 50mA/5.0V |
| Weight (g) | 5.3 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9 × 5 × 1 cm |
What's in the box
- 1 x Beitian Dual BN-220 GPS GLONASS Antenna Module
Frequently Asked Questions
What is the difference between GPS and GLONASS?
Can I connect this module directly to a Raspberry Pi?
What is the power requirement?
What do the LEDs indicate?
Does it come with a cable?
How long does it take to get a fix?
Overview
The Beitian Dual BN-220 is a miniature GPS and GLONASS antenna module that brings reliable positioning to RC drones, FPV models, and Raspberry Pi projects. Combining a high-sensitivity chipset with a compact patch antenna, it delivers accurate location data over a simple TTL serial interface. Its small footprint and lightweight design make it ideal for space-constrained builds where every gram counts.
Key Features
- Dual satellite systems: Supports both GPS and GLONASS for improved accuracy and faster fixes.
- TTL serial output: TX and RX pins allow direct connection to flight controllers, microcontrollers, and Raspberry Pi boards.
- Wide voltage range: Operates from 3.0V to 5.5V, accommodating various power sources.
- Fast acquisition: Hot start in 1 second, warm start in 25 seconds, and cold start in 26 seconds.
- Visual indicators: TX LED flashes blue during data output; PPS LED flashes red when a fix is acquired.
- Compact and light: Measures 22 x 20 x 6 mm and weighs only 5.3 grams.
Specifications Explained
The BN-220 is built around the 8030-KT chipset, which provides stable and accurate positioning data. The 1.00mm pitch 4-pin connector simplifies wiring: GND for ground, TX for data output, RX for data input, and VCC for power (3.0V–5.5V). Current draw is approximately 50mA at 5V, making it efficient for battery-powered applications. The module’s dimensions and weight are optimized for small drones and portable projects.
Compatibility and Requirements
This module outputs standard NMEA data over TTL serial, so it can be used with any device that accepts serial GPS data, including many flight controllers and Raspberry Pi (no driver needed). Ensure your power source provides between 3.0V and 5.5V. The 4-pin connector requires a matching socket or direct soldering. No additional components are required for basic operation.
Typical Uses
Common applications include adding GPS to FPV drones for return-to-home and telemetry, providing location data for Raspberry Pi projects, and serving as a positioning source for RC aircraft and ground vehicles. Its lightweight design is particularly suited for small quadcopters and gliders.
What's in the Box
Package includes one Beitian Dual BN-220 GPS GLONASS Antenna Module. No cables or connectors are included unless specified.
Quick specs
- Item Type
- GPS Antenna, GPS Module
- Electrical Characteristics
- Chipset: 8030-KT
- Additional Specs.
- Acquisition Time: Cold start: 26s Warm start: 25s Hot start: 1s
- Output Voltage
- 5V
- Connector Type
- 1.00mm spacing between the 4pins patch seat
- Wiring
- GND,TX output,RX input,VCC(3.0v-5.5v)













