Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Benewake TFMini-S is a tiny single-point LiDAR module that measures distances from 0.1m to 12m and outputs readings over UART or I2C. Its 1000Hz maximum frame rate and 1cm resolution make it a practical choice for fast obstacle avoidance and altitude control.

Key Highlights

  • Measures 0.1m to 12m with 1cm distance resolution
  • Switchable UART and I2C communication on one module
  • Frame rate up to 1000Hz, 100Hz by default
  • 2 degree field of view for focused single-point ranging
  • Weighs about 5g and draws 140mA or less at 5V
  • Ambient light immunity up to 70klux for outdoor use

Ideal For

  • Drone builders adding altitude hold or terrain following
  • Robotics developers needing compact obstacle detection
  • Engineers prototyping single-point ranging systems
  • Makers building automated barrier or parking projects
  • Students learning LiDAR and serial sensor integration

Buying Tip

Check that your controller can supply a stable 5V rail with at least 200mA peak current, and confirm whether you will use UART or I2C before wiring the 10cm cable.

Elecvora expert review

Our verdict

The TFMini-S packs a 12m range, 1cm resolution and switchable UART or I2C into a 5g module, which makes it a strong fit for weight-sensitive drone and robot builds. Its 70klux ambient light immunity and 10cm blind zone address the main weaknesses of earlier single-point LiDAR designs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light at about 5g with a small 42 x 15 x 16mm body
  • Flexible UART or I2C output switchable at any time
  • Up to 1000Hz frame rate for fast platforms
  • 12m range with 1cm resolution
  • Tolerates ambient light up to 70klux

Cons

  • Operating temperature limited to 0 to 60 degrees Celsius
  • Package contents are not specified in the listing
  • Requires a stable 5V supply with 200mA peak headroom

Best for

Drone and robot builders needing compact, fast single-point distance sensing

Not ideal for

Applications requiring a wide field of view or multi-point scanning

Specifications

Model No. / NameLiDAR Distance Sensor TFmini-S
Field of View (FOV)2Deg.
Distance Measuring Range(M)12
Operating Range0.1m~12m@90%Reflectivity
Accuracy±6cm@(0.1-6m) ±1%@(6m-12m)
Distance resolution1cm
Frame Rate1000Hz (Default 100Hz)
Ambient light immunity(Klux)70klux
Operating Temperature (°C)0°C~60°C
Supply Voltage5V±0.1V
Avg. Current Consumption≤140mA
Power Consumption (W)≤0.7W
Peak Current(mA)200
Communication InterfaceUART / I2C
Cable Length10
Dimensions (L x W x H) mm42*15*16
Weight (g)5g±0.3g
Shipping Weight0.03 kg
Shipping Dimensions5 × 2 × 2 cm

Frequently Asked Questions

What distance range does the TFMini-S measure?
It measures from 0.1m to 12m at 90% reflectivity, with a 1cm distance resolution and a blind zone starting at 10cm.
Can I use either UART or I2C?
Yes. The module supports both UART and I2C, and the interface can be switched at any time.
What power supply does it need?
It requires 5V plus or minus 0.1V, with average current of 140mA or less and peak current up to 200mA.
What is the default frame rate?
The default output rate is 100Hz, and it can be configured up to 1000Hz.
Does it work outdoors?
Yes, it has ambient light immunity up to 70klux, which supports outdoor ranging within its 0 to 60 degrees Celsius operating range.
What is included in the package?
Package contents are not specified for this listing, so please confirm included accessories with the seller before ordering.

Overview

The Benewake TFMini-S is a compact single-point LiDAR distance sensor built for projects that need reliable range readings in a very small package. It covers a measuring range of 0.1m to 12m at 90% reflectivity, with a blind zone that starts at just 10cm. Readings are delivered as a single distance value over UART or I2C, and the interface can be switched at any time.

At roughly 42 x 15 x 16mm and about 5g, the module adds almost no weight or bulk to a drone frame, robot chassis or handheld build. It runs from 5V with average current of 140mA or less and peak current of 200mA, keeping power draw under 0.7W.

Key Features

  • Wide range: 0.1m to 12m at 90% reflectivity
  • Fine resolution: 1cm distance steps
  • Fast output: frame rate up to 1000Hz, 100Hz by default
  • Narrow FOV: 2 degree field of view for focused single-point measurement
  • Dual interface: UART or I2C, switchable at any time
  • Outdoor tolerance: ambient light immunity to 70klux
  • Lightweight: approximately 5g with a 10cm cable

Specifications Explained

Range and accuracy

Accuracy is specified as plus or minus 6cm between 0.1m and 6m, and plus or minus 1% between 6m and 12m. In practice this means close readings are precise to a few centimetres, while longer readings scale with distance. The 2 degree field of view keeps the measurement spot tight, which helps when aiming at small targets.

Frame rate

The default output is 100Hz, with configuration available up to 1000Hz. Higher rates suit fast-moving platforms that need frequent updates, while the default is easier for simple serial parsing.

Power

The sensor expects 5V plus or minus 0.1V. Average consumption stays at or below 140mA and peak current reaches 200mA, so the supply should be able to handle short peaks without browning out.

Environment

Operating temperature is 0 to 60 degrees Celsius, and the module tolerates ambient light up to 70klux, which supports use in daylight conditions.

Compatibility and Requirements

The TFMini-S communicates over UART or I2C, so it pairs with microcontrollers and flight controllers that expose either interface. It requires a regulated 5V supply capable of at least 200mA peak. A 10cm cable is attached to the module for connection.

Typical Uses

  • Unidirectional distance ranging
  • Obstacle avoidance on drones and robots
  • Assisted landing and terrain following
  • Height fixing on multirotors
  • Vehicle position sensing and barrier gate detection
  • Crane and intelligent parking applications

What's in the Box

Package contents are not specified for this listing. Please confirm the included accessories with the seller before ordering.

TFMini-S Micro LiDAR Distance SensorBenewake LiDAR application (3)Benewake LiDAR application (4)

Quick specs

Model No. / Name
LiDAR Distance Sensor TFmini-S
Field of View (FOV)
2Deg.
Distance Measuring Range(M)
12
Operating Range
0.1m~12m@90%Reflectivity
Accuracy
±6cm@(0.1-6m) ±1%@(6m-12m)
Distance resolution
1cm
See all specifications