
1 / 2 · Click to enlarge
At a glance
This battery charger module is a good fit for makers, students and electronics hobbyists. Main specs: input voltage (v) DC 3.8V–6V; charging current DC 3.6V (Output); battery type Single Cell LiFePO4. Check that your power source supplies DC 3.8V–6V before connecting it.
Key Highlights
- Input Voltage (V): DC 3.8V–6V
- Charging Current: DC 3.6V (Output)
- Battery Type: Single Cell LiFePO4
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Input Voltage (V) | DC 3.8V–6V |
|---|---|
| Charging Current | DC 3.6V (Output) |
| Battery Type | Single Cell LiFePO4 |
| Charging method | CC/CV with Thermal Regulation |
| Operating Temperature (°C) | −40°C to +85°C |
| Length (mm) | 18 |
| Width (mm) | 10.16 |
| Weight (g) | 03 |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
Overview
The Black 3.2V 3.6V 1A LiFePO4 Battery Charger Module with Soldering is listed in our battery charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Input Voltage (V): DC 3.8V–6V (match this to your power supply; too high a voltage can damage the part)
- Charging Current: DC 3.6V (Output) (check which plug or cable it needs)
- Battery Type: Single Cell LiFePO4 (note the battery type so you can order spares or the right charger)
- Charging method: CC/CV with Thermal Regulation (check which plug or cable it needs)
- Operating Temperature (°C): −40°C to +85°C
- Length (mm): 18 (measure your mounting space before ordering)
- Width (mm): 10.16 (measure your mounting space before ordering)
- Weight (g): 03 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Black 1A 3.2V/3.6V LiFePO4 Battery Charger Module is a dedicated charging solution designed specifically for single-cell lithium iron phosphate batteries. Supporting DC 3.8V–6V input and delivering a regulated 3.6V charging output, this module ensures safe, stable, and efficient battery charging. It follows constant-current/constant-voltage operation with thermal regulation to prevent overheating.
With built-in protections like battery overvoltage protection, automatic recharge, C/10 charge termination, and temperature sensing, it enhances battery life and reliability. The compact 18mm × 10.16mm PCB size makes it suitable for space-constrained designs such as e-bikes, UPS systems, solar chargers, and portable equipment. LED indicators (“CR” for charging and “OK” for full charge) provide clear charging status feedback.
Features:
- Dedicated LiFePO4 charging module
- Supports 3.2V & 3.6V single cells
- 1A max charging current (adjustable via R1 resistor)
- DC input range: 3.8V–6V
- CC/CV/Constant-temperature charging
- C/10 automatic charge termination
- Battery overvoltage protection
- Dual LED indicators (CR/OK status)
Package Includes:
1 x Black 3.2V 3.6V 1A LiFePO4 Battery Charger Module with SolderingQuick specs
- Input Voltage (V)
- DC 3.8V–6V
- Charging Current
- DC 3.6V (Output)
- Battery Type
- Single Cell LiFePO4
- Charging method
- CC/CV with Thermal Regulation
- Operating Temperature (°C)
- −40°C to +85°C
- Length (mm)
- 18













