Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A black panel-mount socket that accepts standard 4mm banana plugs, rated 10A at 240VDC. Its insulated body and compact 15mm length make it a simple, reliable fixed connection point for test panels and equipment.

Key Highlights

  • Accepts standard 4mm banana plugs for quick connections
  • 10A current rating at 240VDC for low-voltage work
  • Insulated external body protects against accidental contact
  • Accepts 12 to 14 AWG wire for straightforward wiring
  • Compact 15mm length and 10.8mm outer diameter
  • Lightweight at about 3g per socket

Ideal For

  • Electronics technicians building test and bench panels
  • Makers and hobbyists wiring custom enclosures
  • Laboratory users needing standardised connection points
  • Audio and low-voltage equipment builders
  • Anyone replacing a worn 4mm panel socket

Buying Tip

Check your panel hole size against the 10.8mm outer diameter and confirm your load stays within 10A at 240VDC before mounting.

Elecvora expert review

Our verdict

A simple, well-specified panel socket that does exactly what it should: give standard 4mm banana plugs a fixed, insulated home on a panel. The 10A and 240VDC ratings cover most bench and low-voltage work without fuss.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 4mm fit for common banana plugs
  • Insulated external body for safer handling
  • Compact 15mm length suits tight panels
  • Accepts 12 to 14 AWG wire easily
  • Very light at about 3g

Cons

  • Not intended for mains-level voltages
  • Requires a drilled panel hole and wiring work
  • Single socket only, no mounting hardware listed

Best for

Bench, test and low-voltage panel builds

Not ideal for

High-voltage or mains power distribution

Specifications

Rated Current (A)10
Rated Voltage (VDC)240
Allowed Wire Size (AWG)12 to 14
ColorBlack
Compatibility4mm banana socket
Length (mm)15
Outer Diameter (mm)10.8
Weight (g)3
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 2 cm

What's in the box

  • 1 x Black 4mm Banana Socket 312 Panel Socket

Frequently Asked Questions

What plugs fit this socket?
It accepts standard 4mm banana plugs, the common size for this connector family.
What current and voltage can it handle?
The socket is rated for 10A at 240VDC. Keep your circuit within both limits.
What wire size should I use?
It accepts 12 to 14 AWG wire, which suits the 10A rating and is easy to work with.
How is it mounted?
It is a panel socket, so it fits into a hole cut in a panel or surface. Allow for the 10.8mm outer diameter.
What is included in the package?
One black 4mm banana socket 312 panel socket is included.
How should I care for it?
Keep the contact area clean and dry, and check the rear connection periodically for a firm, corrosion-free joint.

Overview

The Generic Black 4mm Banana Socket 312 is a panel-mount connector designed to receive standard 4mm banana plugs. Instead of leaving a loose lead hanging from a device, you fit this socket into a drilled hole in a panel or enclosure and get a fixed, repeatable connection point that is quick to plug into and unplug from. The external parts are insulated, so the metal contact stays shielded from fingers and surrounding hardware during everyday use.

With a 10A rating at 240VDC and support for 12 to 14 AWG wire, it is aimed at low-voltage power and signal connections rather than mains wiring. The body measures 15mm in length with a 10.8mm outer diameter, and each socket weighs roughly 3g, so it adds very little bulk or weight to a build.

Key Features

  • Standard 4mm interface: mates with common 4mm banana plugs for easy connect and disconnect.
  • Insulated construction: external parts are insulated to reduce accidental contact.
  • Panel mounting: designed to sit in a hole cut into a panel or surface for a stable fixed point.
  • Practical wire range: accepts 12 to 14 AWG wire for straightforward hook-up.
  • Compact footprint: 15mm length and 10.8mm outer diameter suit tight panel layouts.

Specifications Explained

10A at 240VDC sets the working envelope: this is a low-voltage connector for test leads, bench supplies and signal paths, not for mains distribution. Stay within both the current and voltage figures when planning a circuit.

12 to 14 AWG wire is a sensible match for the 10A rating and keeps soldering or clamping manageable. Thinner wire is easier to route but check it still suits your load.

15mm length and 10.8mm outer diameter tell you how much panel depth and hole clearance to allow. Measure your panel thickness and drill size before cutting.

Compatibility and Requirements

The socket is compatible with 4mm banana plugs, which is the standard size for this connector family. It requires a panel or surface with a suitable mounting hole, and wiring in the 12 to 14 AWG range. Plan your circuit to stay within 10A and 240VDC.

Typical Uses

  • Test equipment and bench power panels
  • Laboratory and workshop connection points
  • Audio and low-voltage equipment panels
  • DIY enclosures and hobby electronics projects
  • Any panel needing a standardised quick-connect point

What's in the Box

1 x Black 4mm Banana Socket 312 Panel Socket.

Quick specs

Rated Current (A)
10
Rated Voltage (VDC)
240
Allowed Wire Size (AWG)
12 to 14
Color
Black
Compatibility
4mm banana socket
Length (mm)
15
See all specifications