Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact U-shaped chip puller that hooks around PLCC and IC packages so you can lift them from their sockets with one hand. The spring-assisted action and insulated steel body help you extract components evenly without bending pins.

Key Highlights

  • U-shaped jaws hook around PLCC and IC packages for a secure grip
  • Spring-assisted pulling structure supports smooth single-hand operation
  • Stainless steel main body with PVC insulated enclosure
  • Compact 97 x 45 x 14 mm size suits phone and mainboard repair benches
  • Lightweight at 21 g for comfortable repeated use
  • Helps lift chips from sockets without stressing the conductors

Ideal For

  • Mobile phone repair technicians working on mainboards
  • PC and laptop repair hobbyists swapping socketed BIOS chips
  • Electronics students learning safe IC extraction
  • Service technicians repairing TVs, DVD players and computers
  • Makers and tinkerers working with microcontrollers and programmers

Buying Tip

Check that the chip you plan to remove sits in a socket or holder, because this puller is designed for extraction from sockets rather than desoldering soldered-down ICs.

Elecvora expert review

Our verdict

A simple, well-priced extraction tool that gives you a controlled way to lift socketed chips instead of prying them out. The insulated steel body and spring-assisted action make it a sensible addition to a phone or motherboard repair kit.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Even U-shaped grip reduces the risk of bending pins
  • Spring-assisted single-hand operation
  • Insulated PVC covering on a stainless steel body
  • Compact and lightweight for bench work

Cons

  • Not intended for desoldering soldered-down ICs
  • Only suited to socketed PLCC and IC packages
  • No carry case included

Best for

Technicians and hobbyists extracting socketed PLCC and IC chips from phone and PC boards

Not ideal for

Removing ICs that are soldered directly to the PCB

Specifications

ColorBlack
Dimensions (L x W x H) mm97 x 45 x 14
Weight (g)21
Shipping Weight0.025 kg
Shipping Dimensions15 × 8 × 3 cm

What's in the box

  • 1 x Black Chip Puller for Mobile Phone Repair Harmless Mainboard Component Extraction Tool IC Integrated Circuit Extractor

Frequently Asked Questions

What is this chip puller used for?
It is used to lift PLCC and IC components out of their sockets on circuit boards, including phone mainboards, motherboards, microcontrollers and programmers.
Can it remove chips that are soldered to the board?
No. It is designed for extracting chips from sockets and holders. Soldered-down ICs need a separate desoldering method.
Does it need power or a battery?
No. It is a purely mechanical hand tool with a spring-assisted pulling structure.
What are the dimensions and weight?
The puller measures 97 x 45 x 14 mm and weighs 21 g.
What is included in the package?
The package contains one black chip puller for mobile phone repair and mainboard component extraction.
How should I care for the tool?
Wipe the jaws after use, keep the tool dry, and store it in a repair tray or case to protect the U-shaped tips.

Overview

The Generic Black Chip Puller is a dedicated extraction tool for integrated circuits and PLCC components mounted in sockets on phone mainboards, PC motherboards and other circuit boards. Instead of levering a chip out with a screwdriver or gripping it with pliers, the U-shaped jaws slide around the package and pull it upward in a controlled way. This reduces the chance of bending pins or cracking the component during removal.

The tool is built around a stainless steel main body covered with a PVC insulated enclosure. That covering gives you a positive grip and adds a layer of protection against static charge present on boards. The spring-assisted structure is designed for single-hand operation, so your other hand stays free to steady the board.

Key Features

  • U-shaped extraction jaws: hook around PLCC and IC packages to grip them evenly.
  • Spring-assisted pull: supports a smooth, controlled lifting motion with one hand.
  • Insulated body: stainless steel core wrapped in a PVC enclosure.
  • Compact footprint: 97 x 45 x 14 mm fits into a crowded repair bench.
  • Light weight: only 21 g, so it is easy to handle for repeated extractions.

Specifications Explained

Dimensions of 97 x 45 x 14 mm describe a tool short enough to work inside a phone chassis yet wide enough to span common socketed IC packages. The 14 mm thickness keeps the jaws slim enough to reach components in tight areas.

At 21 g, the puller adds almost no fatigue during long repair sessions and will not press heavily on a board if you set it down. The shipping weight of 0.025 kg and shipping dimensions of 15 x 8 x 3 cm reflect the small, light package, which is useful if you are ordering one alongside other parts.

The black colour is a practical finish that hides flux and handling marks on a busy workbench.

Compatibility and Requirements

The puller is intended for PLCC and IC components that sit in sockets or holders on circuit boards. It is suitable for motherboards, microcontrollers and programmers, and for phone mainboard work. It is a hand tool and needs no power source, battery or software. Always confirm that the chip you intend to remove is socketed rather than soldered directly to the board.

Typical Uses

  • Lifting PLCC chips from sockets on phone and PC mainboards.
  • Removing BIOS chips and socketed integrated circuits during servicing.
  • Extracting SMD and IC components from PCB boards where a socket is present.
  • Repair and servicing work on electronic component boards such as TVs, DVD players and computers.

What's in the Box

  • 1 x Black Chip Puller for Mobile Phone Repair and Mainboard Component Extraction

Quick specs

Color
Black
Dimensions (L x W x H) mm
97 x 45 x 14
Weight (g)
21
Shipping Weight
0.025 kg
Shipping Dimensions
15 × 8 × 3 cm
See all specifications