Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A black plastic holder that carries four AA batteries in series for a 6V output, with a screw-fixed sliding cover and a built-in on/off switch. The 15 cm tinned leads solder directly into your project for a tidy, switchable power supply.

Key Highlights

  • Holds four AA cells in a series connection for 6V output
  • Built-in on/off switch controls power without removing batteries
  • Sliding cover secured with a small screw keeps cells protected
  • 15 cm leads with the last 5 mm tinned for easy soldering
  • Compact 70 x 64 x 18 mm plastic housing weighs about 32 g
  • Keeps loose cells organised and enclosed inside your build

Ideal For

  • Makers building breadboard circuits that need a 6V supply
  • Students and classroom electronics projects
  • Hobbyists assembling small robots and motorised builds
  • DIY enthusiasts building LED lighting gadgets
  • Anyone replacing loose taped battery packs with an enclosed holder

Buying Tip

Remember that the four AA cells are not included, so order them separately and check your device tolerates the series voltage before soldering the leads in place.

Elecvora expert review

Our verdict

A neat, low-cost way to give a small project its own switchable 6V supply without wiring a separate switch. The screw-fixed cover and pre-tinned leads make it tidier than a taped battery pack, though you supply the cells and do the soldering yourself.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Built-in on/off switch saves adding a separate switch
  • Screw-fixed sliding cover keeps cells protected
  • Pre-tinned 15 cm leads are ready to solder
  • Compact, lightweight plastic housing

Cons

  • Batteries are not included
  • Requires soldering or a connector to attach the leads
  • Output is unregulated and depends on the cells fitted

Best for

Small 6V hobby and prototype projects

Not ideal for

Devices needing a regulated supply or a different cell size

Specifications

Item TypeBattery Holder
CompatibilityAA Battery
MaterialPlastic
Internal ConnectionsSeries
Output Voltage6
ON/OFF SwitchYes
Cable Length15
ColorBlack
Dimensions (L x W x H) mm70x64x18
Weight (g)32
Shipping Weight0.033 kg
Shipping Dimensions8 × 7.5 × 3 cm

What's in the box

  • 1 x Black Plastic Storage Box Case Holder for 4 x AA Cell with On/Off Switch

Frequently Asked Questions

What batteries does this holder take?
It holds four AA cells. The cells are not included, so you will need to supply them separately.
What output voltage does it provide?
The cells are connected in series, giving a 6V output at the leads when four 1.5V AA batteries are fitted.
How do I connect it to my project?
The 15 cm leads have their last 5 mm tinned, so you can solder them directly to your circuit or clamp them into a terminal block.
Does the switch cut power completely?
Yes, the on/off switch is wired into the holder's output path, so it can be used to control power to your project.
How is the cover secured?
The sliding cover is held in place by a small screw, which keeps the batteries enclosed.
What are the dimensions and weight?
The case measures 70 x 64 x 18 mm and weighs about 32 g.

Overview

The Black Plastic 4 x AA Battery Holder Case is a compact enclosure that holds four AA cells and routes their power to your project through a built-in switch and a pair of flying leads. The cells sit in a series arrangement, so the holder presents a 6V output at the leads, making it a simple way to give a small circuit its own dedicated battery supply.

The sliding cover is held in place by a small screw, so the cells stay enclosed during handling and transport. The integrated on/off switch sits between the cells and the leads, letting you power the project down without opening the case or pulling a battery.

Key Features

  • Four AA cells in series: produces a 6V output for projects that need an external battery pack.
  • On/off switch: cuts power at the holder, which is handy for builds without their own power switch.
  • Screw-fixed sliding cover: keeps the batteries covered and secure.
  • 15 cm leads with tinned tips: the final 5 mm of each lead is tinned, ready for soldering.
  • Moulded plastic body: a 70 x 64 x 18 mm black case weighing roughly 32 g.

Specifications Explained

Series connection and 6V output: the four AA cells are wired in series, so their voltages add together. With four 1.5V alkaline cells installed, the holder supplies 6V at the leads. The 6V figure describes the holder's output configuration, not a regulated supply, so the actual voltage depends on the cells you fit and their state of charge.

15 cm cable length: the leads give you enough slack to route power from the holder to a board or terminal block without strain. The tinned ends mean you can solder them directly or clamp them into a screw terminal.

Dimensions and weight: at 70 x 64 x 18 mm and about 32 g empty, the case is small enough to fit inside handheld builds and lightweight enough not to upset balance in small models.

Compatibility and Requirements

The holder is designed for AA batteries only. You will need to supply four AA cells separately, and a soldering iron or suitable connector if you plan to join the tinned leads to your circuit. Because the output is a direct series connection, check that your device is happy with the voltage range of the cells you intend to use.

Typical Uses

  • Powering breadboard and prototype circuits that need a 6V supply
  • Small robots and motorised hobby builds
  • LED lighting projects and DIY gadgets
  • Replacing loose taped battery packs with an enclosed holder
  • Student and classroom electronics work

What's in the Box

One black plastic 4 x AA battery holder case with on/off switch. Batteries are not included.

Quick specs

Item Type
Battery Holder
Compatibility
AA Battery
Material
Plastic
Internal Connections
Series
Output Voltage
6
ON/OFF Switch
Yes
See all specifications