Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This imu, accelerometer, magnetometer and gyroscope is a good fit for makers, students and electronics hobbyists. Main specs: item type Barometric Sensor; model no. / name Barometric Pressure Sensor; operating voltage (vdc) 1.3 to 3.6. Check that your power source supplies 1.3 to 3.6 before connecting it.

Key Highlights

  • Item Type: Barometric Sensor
  • Model No. / Name: Barometric Pressure Sensor
  • Operating Voltage (VDC): 1.3 to 3.6

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeBarometric Sensor
Model No. / NameBarometric Pressure Sensor
Operating Voltage (VDC)1.3 to 3.6
Peak Current (A)1000uA
Standby Current(uA)0.1uA
Operating Temperature (°C)-40 to 80°C
Length (mm)20
Width (mm)25
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions5 × 8 × 1 cm

Overview

The BMP180 Digital Barometric Pressure Sensor Module is listed in our imu, accelerometer, magnetometer and gyroscope range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Barometric Sensor (space for firmware, files or media)
  • Model No. / Name: Barometric Pressure Sensor (space for firmware, files or media)
  • Operating Voltage (VDC): 1.3 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Peak Current (A): 1000uA (your supply must deliver at least this much current)
  • Standby Current(uA): 0.1uA (your supply must deliver at least this much current)
  • Operating Temperature (°C): -40 to 80°C
  • Length (mm): 20 (measure your mounting space before ordering)
  • Width (mm): 25 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a BMP-180 based digital barometric pressure sensor module and is functionally compatible with the older BMP-085 digital pressure sensors with less power consumption smaller in size and more accurate. BMP180 combines barometric pressure, temperature, and altitude. The I2C allows easy interface with any microcontroller. Onboard 3.3V LDO regulator makes this board fully 5V supply compatible. BMP-180 can measure pressure range from 300 to 1100hPa (+9000m to -500m relating to sea level) with an accuracy down to 0.02hPa (0.17m) in advance resolution mode. BMP-180 is an improved replacement for the BMP-085 sensor. BMP-180 uses piezo-resistive technology for high accuracy, linearity, EMC robustness, and stability for a longer period of time. Note : HW-415 on board working remains same.
Application :  
  1. Enhancement of GPS navigation (dead-reckoning, slope detection, etc.)
  2. In- and out-door navigation
  3. Leisure and sports
  4. Weather forecast
  5. Vertical velocity indication (rise/sink speed)

Features:

  1. Can measure temperature and altitude.
  2. Pressure range: 300 to 1100hPa
  3. High relative accuracy of ±0.12hPa
  4. Can work on low voltages
  5. 3.4Mhz I2C interface
  6. Low power consumption (3uA)
  7. Pressure conversion time: 5msec
  8. Potable size

Package Includes:

1 x BMP180 Digital Barometric Pressure Sensor Module

1 x 5 Pin Male Header

Quick specs

Item Type
Barometric Sensor
Model No. / Name
Barometric Pressure Sensor
Operating Voltage (VDC)
1.3 to 3.6
Peak Current (A)
1000uA
Standby Current(uA)
0.1uA
Operating Temperature (°C)
-40 to 80°C
See all specifications