Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 0.40 mm MK8 replacement nozzle from Bondtech with a brass body and nickel coating for wear and corrosion resistance. It fits many Ender and CR printers and installs with a standard 8 mm wrench.

Key Highlights

  • 0.40 mm opening for balanced detail and everyday print speed
  • Brass body with nickel coating for durability and corrosion resistance
  • MK8 form factor fits many Creality Ender and CR models
  • Optimised for 1.75 mm filament, also listed for 2.85 mm
  • Installs or replaces with a standard 8 mm wrench
  • Weighs about 3 g, a direct swap for the stock nozzle

Ideal For

  • Ender and CR series owners replacing a worn or clogged nozzle
  • Makers who want a coated nozzle for everyday PLA and PETG printing
  • Hobbyists keeping a spare nozzle ready for quick swaps
  • Users of MK8-style hotends looking for a known-brand component

Buying Tip

Check that your hotend uses the MK8 nozzle form factor and that you have an 8 mm wrench before ordering, since this is a single nozzle with no tools included.

Elecvora expert review

Our verdict

A sensible replacement nozzle for owners of the listed Ender and CR printers who want a coated, branded part in the common 0.40 mm size. It is a straightforward swap rather than an upgrade that changes your printer's capabilities.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Nickel coating adds wear and corrosion resistance over bare brass
  • 0.40 mm size suits general-purpose printing
  • Wide listed compatibility across Ender and CR models
  • Simple 8 mm wrench installation

Cons

  • Sold as a single nozzle with no wrench included
  • Only one diameter is covered by this listing
  • Genuine benefit depends on correct hotend seating

Best for

Routine maintenance and everyday printing on MK8-style Ender and CR printers

Not ideal for

Printers that use a non-MK8 hotend or users needing abrasive-filament-specific nozzles

Specifications

Item TypeNozzle
CompatibilityCR-20 Pro, Ender-3 Pro, Ender-5, CR-10, CR-10 S4, CR-10 S5, CR-10s, Ender-2, CR-10 V2, CR-6 SE, CR-10 Smart
MaterialBrass with Nickel Coating
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions5 × 6 × 2 cm

What's in the box

  • 1 x Bondtech CHT BiMetal MK8 Coated Nozzle 0.40

Frequently Asked Questions

Which printers does this nozzle fit?
It is listed as compatible with the CR-20 Pro, Ender-3 Pro, Ender-5, CR-10, CR-10 S4, CR-10 S5, CR-10s, Ender-2, CR-10 V2, CR-6 SE and CR-10 Smart. Check that your hotend uses the MK8 form factor before ordering.
What filament size is it for?
It is optimised for 1.75 mm filament and is also listed as compatible with 2.85 mm filament.
What tool do I need to install it?
A standard 8 mm wrench is required for installation or replacement. The wrench is not included.
How many nozzles are in the pack?
The pack contains one nozzle, the Bondtech CHT BiMetal MK8 Coated Nozzle in 0.40 mm.
What is the nozzle made of?
The body is brass with a nickel coating, which adds durability and corrosion resistance.
How should I care for the nozzle?
Keep it clean, avoid overtightening during installation, and replace it if extrusion becomes uneven or the opening is damaged.

Overview

The Bondtech CHT BiMetal MK8 Coated Nozzle 0.40 is a replacement nozzle for MK8-style hotends. It combines a brass body with a nickel coating, a pairing chosen for heat conductivity and resistance to wear and corrosion. The 0.40 mm opening is the common all-round size, sitting between fine-detail nozzles and wide-diameter units used for fast, thick layers.

This is a single nozzle, sold as one unit, intended for users who want to replace a worn or clogged nozzle or move to a coated option from a known brand. It is a practical spare to keep on hand so a blocked nozzle does not stall a print project.

Key Features

  • 0.40 mm opening: a versatile size for general printing.
  • Brass body: good heat transfer from the heater block to the filament.
  • Nickel coating: adds a harder surface and helps resist corrosion.
  • MK8 compatibility: fits a long list of Ender and CR printers.
  • Simple installation: a standard 8 mm wrench is all that is required.

Specifications Explained

Nozzle diameter

The 0.40 mm figure is the size of the opening the molten filament passes through. It governs the range of layer heights and line widths you can print and is the most common choice for everyday parts, miniatures and functional prints.

Material and coating

The body is brass, a material valued in nozzles for how readily it moves heat. The nickel coating sits on top and provides a tougher, more corrosion-resistant surface than bare brass.

Weight and dimensions

At roughly 3 g, the nozzle adds negligible weight to the hotend. Shipping dimensions of 5 x 6 x 2 cm reflect the small pack, not the nozzle itself.

Compatibility and Requirements

This nozzle is listed as compatible with the CR-20 Pro, Ender-3 Pro, Ender-5, CR-10, CR-10 S4, CR-10 S5, CR-10s, Ender-2, CR-10 V2, CR-6 SE and CR-10 Smart. It is optimised for 1.75 mm filament and is also listed as compatible with 2.85 mm filament. A standard 8 mm wrench is needed for installation or removal.

Typical Uses

Use it for routine printing on the listed printers, for replacing a clogged or worn nozzle, or as a spare kept ready for a quick swap. The 0.40 mm size suits general-purpose parts, prototypes and models where a middle-ground layer height is acceptable.

What's in the Box

  • 1 x Bondtech CHT BiMetal MK8 Coated Nozzle 0.40

Quick specs

Item Type
Nozzle
Compatibility
CR-20 Pro, Ender-3 Pro, Ender-5, CR-10, CR-10 S4, CR-10 S5, CR-10s, Ender-2, CR-10 V2, CR-6 SE, CR-10 Smart
Material
Brass with Nickel Coating
Weight (g)
3
Shipping Weight
0.005 kg
Shipping Dimensions
5 × 6 × 2 cm
See all specifications