
1 / 2 · Click to enlarge
At a glance
Made by BOSCH, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Absolute; sensor type MEMS digital pressure & temperature sensor; output type I2C/SPI. Check that your power source supplies 1.71 V-3.6 V before connecting it.
Key Highlights
- Small and easy to carry or mount
- Pressure Type: Absolute
- Sensor Type: MEMS digital pressure & temperature sensor
- Output Type: I2C/SPI
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Pressure Type | Absolute |
|---|---|
| Pressure Range | 300 hPa to 1100 hPa |
| Sensor Type | MEMS digital pressure & temperature sensor |
| Output Type | I2C/SPI |
| Supply Voltage | 1.71 V-3.6 V |
| Accuracy | +/-1 hPa |
| Application | Mobile devices and GPS altitude correction and drones and weather stations |
| Interface | I2C and SPI |
| Current consumption | 3.4 µA @ 1 Hz |
| Length | 2.5 cm |
| Width | 0.2 cm |
| Weight (Kg) | 0.001 kg |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
Overview
The Bosch BMP280, Digital Pressure & Temperature Sensor, -40°C~+85°C, I²C & SPI, Compact LGA, Range: 300 hPa~1100 hPa, made by BOSCH, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Pressure Type: Absolute
- Pressure Range: 300 hPa to 1100 hPa (quoted range is usually line-of-sight; walls and interference shorten it)
- Sensor Type: MEMS digital pressure & temperature sensor
- Output Type: I2C/SPI
- Supply Voltage: 1.71 V-3.6 V (match this to your power supply; too high a voltage can damage the part)
- Accuracy: +/-1 hPa
- Application: Mobile devices and GPS altitude correction and drones and weather stations
- Interface: I2C and SPI (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The BOSCH BMP280 Digital Pressure Sensor is an absolute barometric pressure sensor, which is especially feasible for mobile applications. Its small dimensions and its low power consumption allow for the implementation in battery-powered devices such as mobile phones, GPS modules or watches. The BMP280 is based on Bosch’s proven piezo-resistive pressure sensor technology featuring high accuracy and linearity as well as long-term stability and high EMC robustness. Numerous device operation options guarantee for highest flexibility. The device is optimized in terms of power consumption, resolution and filter performance.
Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.Features:
- Ultra-low power modes for battery efficiency
- High accuracy and long-term stability
- Small and lightweight (2.0 × 2.5 × 0.95 mm³)
- High-resolution pressure (0.01 hPa) and temperature (0.01°C) data
- EMC robust with proven piezo-resistive technology
- Flexible I²C and SPI communication interfaces
Package Includes:
1 x BOSCH BMP280 Digital Pressure SensorQuick specs
- Pressure Type
- Absolute
- Pressure Range
- 300 hPa to 1100 hPa
- Sensor Type
- MEMS digital pressure & temperature sensor
- Output Type
- I2C/SPI
- Supply Voltage
- 1.71 V-3.6 V
- Accuracy
- +/-1 hPa



















