
1 / 3 · Click to enlarge
AI Summary
Bourns shielded SMD power inductor with 220 µH inductance, 0.64 A rated current and 0.69 Ω resistance. Its shielded construction helps reduce magnetic interference in compact power circuits.
Key Highlights
- 220 µH inductance with 20% tolerance for power conversion designs
- 0.64 A rated current supports small to medium load circuits
- Low 0.69 Ω DC resistance helps limit conduction losses
- Shielded construction reduces stray magnetic field emissions
- Surface-mount package suits automated PCB assembly
- Compact 1 × 1 × 1 cm shipping size for easy handling
Ideal For
- Electronics engineers designing DC-DC power stages
- Makers building compact power supply projects
- Repair technicians replacing SMD inductors
- Students learning power electronics and magnetics
- PCB designers needing shielded inductors for EMI control
Buying Tip
Check that your circuit's continuous current stays below 0.64 A and that the 220 µH value with ±20% tolerance suits your converter's design before ordering.
Elecvora expert review
Our verdict
A well-specified shielded SMD inductor from a known brand, suited to compact power designs that need 220 µH at moderate current. It is a practical part for engineers who value predictable performance and EMI containment.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Shielded construction helps reduce magnetic interference
- Clear inductance, current and resistance ratings
- Surface-mount format supports automated assembly
- Recognised manufacturer with established magnetics experience
Cons
- No voltage rating or detailed datasheet provided in the listing
- 0.64 A rating may be too low for higher-power converters
- Only one unit included per package
Best for
Compact DC-DC converters and power filters with currents up to 0.64 A
Not ideal for
High-current power stages or designs requiring tight inductance tolerance
Specifications
| Rated Current (A) | 0.64A |
|---|---|
| Inductance | 220uH |
| Tolerance (%) | 20 |
| Resistance (Ohm) | 0.69Ω |
| Bluetooth Version | Supports Bluetooth 5.1 dual mode function |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x Bourns Shielded SMD Power Inductor, 220 µH, 0.64 A
Frequently Asked Questions
What is the rated current of this inductor?
Is this inductor shielded?
What is the tolerance of the inductance?
How many inductors are included?
Can I use this in a DC-DC converter?
What is the DC resistance?
Overview
The Bourns shielded SMD power inductor is a surface-mount component designed for power conversion and filtering roles on printed circuit boards. It offers 220 µH of inductance, a rated current of 0.64 A and a DC resistance of 0.69 Ω. The shielded construction helps contain the magnetic field within the component, which can reduce interference with nearby traces and sensitive parts. This makes it a useful building block for compact power supplies, DC-DC converters and noise-filtering networks where board space is limited.
Key Features
- 220 µH inductance with ±20% tolerance for standard power designs
- 0.64 A rated current to handle typical low-to-medium current loads
- 0.69 Ω maximum DC resistance to keep voltage drop and heating in check
- Shielded magnetic construction to limit radiated emissions
- Surface-mount format compatible with reflow soldering processes
Specifications Explained
Inductance (220 µH): This value determines how much energy the inductor can store and how it behaves in filtering and switching circuits. It is a common choice for step-down and step-up converter designs operating at moderate switching frequencies.
Rated current (0.64 A): This is the current the inductor can carry continuously under specified conditions. Designs should stay at or below this level to avoid excessive temperature rise and saturation.
DC resistance (0.69 Ω): Lower resistance means less power lost as heat. At 0.64 A, the resistive loss is roughly 0.28 W, so thermal design should account for this.
Tolerance (±20%): Inductance can vary within this band. Circuits that are sensitive to precise inductance values should be validated across the tolerance range.
Compatibility and Requirements
This is a surface-mount component intended for PCB assembly. It requires a compatible land pattern and a reflow soldering process. No specific voltage rating is stated in the product data, so the applicable circuit voltage should be verified against the manufacturer's datasheet before use. The inductor is not a complete module and must be integrated into a host circuit.
Typical Uses
- DC-DC converter output and input filtering
- Power supply smoothing in embedded systems
- EMI suppression in compact electronic devices
- General-purpose energy storage in low-power circuits
What's in the Box
One Bourns shielded SMD power inductor, 220 µH, 0.64 A.
Quick specs
- Rated Current (A)
- 0.64A
- Inductance
- 220uH
- Tolerance (%)
- 20
- Resistance (Ohm)
- 0.69Ω
- Bluetooth Version
- Supports Bluetooth 5.1 dual mode function
- Shipping Weight
- 0.001 kg








![CM453232-100KL-BOURNS-CM453232-100KL-Wirewound Inductor, 10 µH, 1.6 ohm, 20 MHz, 250 mA, 1812 [4532 Metric], CM45 Series — Bourns](/_next/image?url=%2Fapi%2Fimg%3Furl%3Dhttps%253A%252F%252Frobu-prod-media.s3.ap-south-1.amazonaws.com%252Fuploads%252F2024%252F12%252F55695605-40.jpg&w=3840&q=75)


![SF-1206F700M-2-BOURNS-SF-1206F700M-2-Fuse, Surface Mount, 7 A, Fast Acting, 48 VDC, 1206 [3216 Metric], SF-1206F-M — Bourns](/_next/image?url=%2Fapi%2Fimg%3Furl%3Dhttps%253A%252F%252Frobu-prod-media.s3.ap-south-1.amazonaws.com%252Fuploads%252F2024%252F06%252F3771742.png&w=3840&q=75)







