Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 2-pin wafer male connector with a right-angle through-hole body, rated 1A at 50V and specified from -40 °C to +85 °C. Its 1.5mm pitch and low-profile exit make it useful for tight PCB layouts where a wire harness should run parallel to the board.

Key Highlights

  • 2-pin wafer male connector in a right-angle through-hole format
  • Rated 1A at 50V for low-power signal and supply links
  • Operates across a -40 °C to +85 °C temperature range
  • 1.5mm pitch keeps the PCB footprint compact
  • Contact resistance specified at 20M max
  • Lightweight part at roughly 0.001 kg shipping weight

Ideal For

  • Hobbyists building compact PCBs with side-exit wire harnesses
  • Repair technicians replacing a 2-pin board connector
  • Small-batch electronics builders needing a repeatable board-to-wire joint
  • Makers working on low-power signal and supply links
  • Anyone assembling prototypes with 1.5mm pitch footprints

Buying Tip

Check that your PCB footprint and mating female housing both match the 1.5mm pitch and 2-pin layout before ordering, since this is a male wafer connector only.

Elecvora expert review

Our verdict

A tidy, low-power 2-pin connector that solves the side-exit cabling problem on compact boards. It is a simple part, so judge it on footprint fit and soldering quality rather than features.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Right-angle body keeps harness routing parallel to the board
  • Compact 1.5mm pitch saves board space
  • Clear 1A and 50V ratings for low-power work
  • Specified across a wide -40 °C to +85 °C range

Cons

  • Male connector only, so a matching female housing is needed
  • Low 1A rating limits it to signal and light supply duty
  • Soldering is required for through-hole mounting

Best for

Compact PCBs needing a low-power 2-pin side-exit wire link

Not ideal for

Higher-current power connections or plug-and-play use without soldering

Specifications

ManufacturerBoyu
Rated Current (A)1
Rated Voltage (VDC)50
Operating Temperature (°C)-40 °C to +85 °C
Contact Resistance (ohm)20M max
Configuration2 pin Wafer Male Connector Through Hole Right Angle
Mounting TypeThrough Hole Straight
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 1.5AW 1.5mm 2-pin wafer male connector, through-hole right angle

Frequently Asked Questions

What does this connector mate with?
It is a male wafer connector, so it pairs with the matching female housing for the same 1.5mm 2-pin series. Confirm the housing series before ordering.
How much current can it carry?
The rated current is 1A, with a rated voltage of 50V. It is intended for low-power signal and supply connections rather than high-draw loads.
Does it need soldering?
Yes. It is a through-hole part, so the pins pass through the PCB and are soldered on the underside for a secure joint.
What temperature range does it handle?
It is specified to operate from -40 °C to +85 °C, which covers most indoor and sheltered outdoor electronics use.
How many connectors are included?
One 1.5AW 1.5mm 2-pin wafer male connector is supplied per order.
How should I store it before use?
Keep it in a small anti-static bag or parts box away from moisture and loose metal, and avoid bending the pins before soldering.

Overview

The Boyu 1.5AW is a 2-pin wafer male connector intended for through-hole mounting on a printed circuit board. Its right-angle body means the mating connection leaves the board at a shallow angle, which helps when a wire harness needs to run along the PCB instead of rising above it. The part uses a 1.5mm pitch, so it occupies little board area and fits into layouts where space is limited.

This is a small, low-power component. It is rated for 1A at 50V and is specified to work between -40 °C and +85 °C, covering the conditions most hobby, repair and small-batch electronics projects encounter.

Key Features

  • 2-pin configuration: a simple two-contact link for a signal pair or a low-current supply.
  • Right-angle through-hole body: the connection exits parallel to the board for tidier cable routing.
  • 1.5mm pitch: a compact footprint suited to dense PCB layouts.
  • 1A and 50V ratings: appropriate for low-power signal and supply connections.
  • Wide temperature range: specified from -40 °C to +85 °C.
  • Lightweight: shipping weight is about 0.001 kg, so it adds almost nothing to an order.

Specifications Explained

The 1A current rating tells you how much current the contacts are intended to carry in normal use; it is a low-power part, not a connector for motors or high-draw loads. The 50V rating sets the working voltage ceiling for the connection.

Contact resistance of 20M max is the figure given for this part and is worth checking against your circuit's requirements before you commit it to a design. The -40 °C to +85 °C range means the connector is specified for cold outdoor conditions through to warm enclosures, so it is not limited to bench-top use.

The right-angle, through-hole mounting style means the pins pass through the board and are soldered on the underside, giving a mechanically secure joint, while the mating face points sideways.

Compatibility and Requirements

This is a male wafer connector, so it mates with the corresponding female housing for the same 1.5mm series. It is a through-hole part: you will need a drilled PCB with matching holes and soldering equipment to fit it. Plan your track widths and clearances around the 1A and 50V ratings, and confirm that the 1.5mm pitch matches the footprint on your board before ordering.

Typical Uses

  • Board-to-wire links inside small electronic assemblies
  • Signal and low-current supply connections on prototype PCBs
  • Repair and rework where a compact 2-pin header is needed
  • Compact projects with limited board space and side-exit cabling

What's in the Box

One 1.5AW 1.5mm 2-pin wafer male connector, through-hole right angle.

Quick specs

Manufacturer
Boyu
Rated Current (A)
1
Rated Voltage (VDC)
50
Operating Temperature (°C)
-40 °C to +85 °C
Contact Resistance (ohm)
20M max
Configuration
2 pin Wafer Male Connector Through Hole Right Angle
See all specifications