Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This Boyu 6-pin wafer male connector features a 1.5mm pitch and right-angle through-hole mounting for compact PCB connections. It is rated for 1A at 50V DC and accepts wires from AWG #32 to #28.

Key Highlights

  • 6-pin wafer male connector with 1.5mm pitch
  • Right-angle through-hole mounting saves vertical space
  • Rated 1A at 50V DC for low-power circuits
  • Operates from -40°C to +85°C
  • Accepts AWG #32 to #28 wires
  • Compact and reliable design for tight layouts

Ideal For

  • Electronics hobbyists building custom circuits
  • RC and drone enthusiasts wiring low-power components
  • Repair technicians replacing board connectors
  • Product designers prototyping compact devices
  • Makers working with AWG #32 to #28 wires

Buying Tip

Check that your PCB footprint matches the 1.5mm pitch and that your wire gauge is within AWG #32 to #28 before ordering.

Elecvora expert review

Our verdict

A dependable compact connector for low-power board-to-wire links, though it requires soldering and a mating half. Its right-angle design is a real asset in tight spaces.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 1.5mm pitch saves board space
  • Right-angle orientation simplifies cable routing
  • Wide temperature range for varied environments
  • Accepts commonly used AWG #32 to #28 wires

Cons

  • Requires soldering to PCB
  • Mating female connector not included
  • Limited to 1A current

Best for

Low-power signal and control connections in compact electronics

Not ideal for

High-current power applications or solderless setups

Specifications

ManufacturerBoyu
Rated Current (A)1
Rated Voltage (VDC)50
Operating Temperature (°C)-40 °C to +85 °C
Contact Resistance (ohm)20M max
Configuration6 pin Wafer Male Connector Through Hole Right Angle
Mounting TypeThrough Hole Straight
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 1.5AW-1.5mm-6 pin Wafer Male Connector Through Hole Right Angle

Frequently Asked Questions

What wire sizes does this connector accept?
It is compatible with wires from AWG #32 to #28.
Is the mating female connector included?
No, only the male wafer connector is included. A compatible female housing is required to complete the connection.
What is the maximum current rating?
The connector is rated for 1A at 50V DC.
Can I use this for high-power devices?
No, it is designed for low-power signal and control applications only.
What is the operating temperature range?
It operates from -40°C to +85°C.
How is it mounted?
It mounts through-hole with a right-angle orientation, requiring soldering to the PCB.

Overview

The Boyu 1.5AW-1.5mm-6 pin Wafer Male Connector is a compact right-angle through-hole component built for secure board-to-wire connections. Its 1.5mm pitch and six-pin configuration make it a practical choice for densely packed PCBs where space is limited. The right-angle design allows cables to exit parallel to the board, reducing height and simplifying routing in enclosures.

Key Features

  • 6-pin wafer male connector with 1.5mm pitch for compact layouts.
  • Right-angle through-hole mounting provides a stable mechanical joint and saves vertical space.
  • Rated 1A at 50V DC for low-power signal and control applications.
  • Wide operating temperature range of -40°C to +85°C for use in varied environments.
  • Wire compatibility from AWG #32 to #28 for flexible wiring options.

Specifications Explained

Rated Current (1A): This connector is designed for low-current circuits, such as signal lines, sensor connections, and low-power control. It is not intended for high-power devices.

Rated Voltage (50V DC): Suitable for common low-voltage electronics, including 5V, 12V, and 24V systems, with a safety margin up to 50V DC.

Operating Temperature (-40°C to +85°C): Withstands both cold and hot environments, making it reliable for outdoor or industrial electronics within that range.

Contact Resistance (20M max): Ensures a stable electrical connection with minimal signal loss for low-current applications.

Configuration (6 pin, right angle, through-hole): The right-angle orientation is ideal for edge-mounted connections or when cables need to run parallel to the board. Through-hole mounting provides a strong solder joint.

Compatibility and Requirements

This connector accepts wires sized AWG #32 to #28. It requires soldering to a PCB with a matching 1.5mm pitch footprint. No other components are included; a corresponding female housing or mating connector is required to complete the connection (not included).

Typical Uses

  • Signal and control wiring in drone and RC electronics
  • Prototyping and DIY electronics projects
  • Repair and replacement of connectors on consumer gadgets
  • Low-power connections in small appliances and tools
  • Board-to-wire links in tight enclosures

What's in the Box

1 x 1.5AW-1.5mm-6 pin Wafer Male Connector Through Hole Right Angle

Quick specs

Manufacturer
Boyu
Rated Current (A)
1
Rated Voltage (VDC)
50
Operating Temperature (°C)
-40 °C to +85 °C
Contact Resistance (ohm)
20M max
Configuration
6 pin Wafer Male Connector Through Hole Right Angle
See all specifications