
1 / 3 · Click to enlarge
AI Summary
This is an 8-pin Boyu 2510-A Relimate male connector with 2.5mm pitch and straight through-hole pins for PCB or harness wiring. It is rated 3A at 250V DC and accepts AWG #28 to #22 wire, keeping contact resistance at 20 milliohms or less.
Key Highlights
- 8-pin Relimate male connector with 2.5mm pitch
- Straight through-hole pins for PCB soldering or harness builds
- Rated 3A at 250V DC for low-power signal and supply lines
- Accepts AWG #28 to #22 wire for flexible wiring choices
- Maximum contact resistance of 20 milliohms for stable connections
- Operates from -20°C to 85°C in typical electronics environments
Ideal For
- Electronics hobbyists building custom wire harnesses
- RC and drone builders needing compact multi-pin links
- Repair technicians replacing 8-pin male headers
- Prototyping engineers wiring sensor bundles
- Makers assembling removable board-to-board connections
Buying Tip
Confirm you have a matching 2.5mm-pitch female Relimate housing before ordering, since this listing is the male connector only.
Elecvora expert review
Our verdict
A tidy, no-frills 8-pin male connector that does exactly what it should for low-power wiring and prototyping. The 2.5mm pitch and through-hole pins make it easy to work with, provided you already have the matching female housing.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 3A and 250V DC ratings for confident low-power use
- Accepts a useful AWG #28 to #22 wire range
- Low 20 milliohm maximum contact resistance
- Straight pins simplify soldering and harness work
Cons
- Male connector only, so a female housing is required
- Not intended for high-current loads
- No wire or hardware included
Best for
Prototyping and repair work needing a compact 8-pin pluggable link
Not ideal for
High-current power distribution or outdoor high-voltage use
Specifications
| Manufacturer | Boyu |
|---|---|
| Rated Current (A) | 3 |
| Rated Voltage (VDC) | 250 |
| Contact Resistance (ohm) | 20MQ |
| Operating Temperature (°C) | -20 to 85 |
| Wires | AWG #28 to #22 |
| No. of Pins | 8 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2510-A 2.5mm 8-pin Relimate Male Connector Through Hole Straight
Frequently Asked Questions
Is this a male or female connector?
What wire sizes can I use?
What are the electrical ratings?
What temperature range does it handle?
What is included in the package?
How should I care for the connector?
Overview
The Boyu 2510-A is an 8-pin Relimate male connector built around a 2.5mm pitch and straight through-hole pins. It gives you a compact, solderable connection point for grouping up to eight wires into a single pluggable link. The straight pin orientation keeps the connector low-profile on a board and makes it easy to mate with a matching female housing.
This is a practical part for anyone assembling or repairing electronics where a small multi-pin interface is required. It is a male connector only, so a matching female Relimate housing is needed to complete the pair.
Key Features
- 8 pins on a 2.5mm pitch: a compact footprint for dense wiring runs.
- Straight through-hole pins: simple to solder into plated holes or attach to a wire harness.
- 3A / 250V DC rating: suited to signal lines and modest power distribution.
- AWG #28 to #22 wire support: covers a useful range of hook-up and stranded wire sizes.
- Low contact resistance: a maximum of 20 milliohms helps keep voltage drop small.
- Wide operating window: stable from -20°C to 85°C.
Specifications Explained
The 3A current rating and 250V DC voltage rating define the electrical envelope. These figures suit control signals, sensor bundles, and low-power supply rails rather than high-current loads. The 20 milliohm maximum contact resistance describes how little resistance the mated contact adds, which matters when you want predictable behaviour across many connection cycles.
Wire compatibility from AWG #28 to #22 means the connector can take thin signal wire up to slightly heavier hook-up wire. Choose a gauge inside that range and crimp or solder it properly so the pin is not stressed. The -20°C to 85°C operating range covers most indoor and sheltered electronics work, from bench prototypes to enclosed equipment.
Compatibility and Requirements
This is a male connector, so it requires a compatible 2.5mm-pitch female Relimate housing to mate with. It is intended for through-hole mounting or harness assembly, which means soldering or crimping tools are needed. No cable, female housing, or mounting hardware is included. Use wire within the AWG #28 to #22 range and keep loads within the 3A and 250V DC ratings.
Typical Uses
- Grouping signal wires on prototype and repair boards
- Building removable harness links in RC and electronics projects
- Connecting sensor or control bundles in small enclosures
- Replacing a damaged 8-pin male header in existing equipment
What's in the Box
One 2510-A 2.5mm 8-pin Relimate male connector with straight through-hole pins. Matching female housing, wire, and tools are not included.
Quick specs
- Manufacturer
- Boyu
- Rated Current (A)
- 3
- Rated Voltage (VDC)
- 250
- Contact Resistance (ohm)
- 20MQ
- Operating Temperature (°C)
- -20 to 85
- Wires
- AWG #28 to #22















