
1 / 3 · Click to enlarge
AI Summary
The Boyu 2510-A is a straight through-hole 2-pin male Relimate connector with 2.5mm pitch. It provides a secure, detachable 3A/250V connection for AWG 28-22 wires on PCBs.
Key Highlights
- 2.5mm pitch, 2-pin male Relimate connector
- Straight through-hole PCB mounting
- Rated 3A current and 250V DC voltage
- Accepts AWG 28 to AWG 22 wires
- Operates from -20°C to 85°C
- Low contact resistance of 20mΩ max
Ideal For
- Electronics hobbyists building custom PCBs
- Prototyping and breadboard-to-board wiring
- Small robotics and drone accessory projects
- LED lighting and sensor module connections
- Repair technicians replacing worn connectors
Buying Tip
Confirm that your PCB pad spacing matches the 2.5mm pitch and that you have a matching female Relimate housing before soldering.
Elecvora expert review
Our verdict
The Boyu 2510-A is a practical, no-frills connector for through-hole PCB work. It offers adequate ratings for most low-power projects and a familiar 2.5mm pitch that simplifies mating.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Straight through-hole design is easy to solder and inspect
- 3A and 250V DC ratings cover many common circuits
- Wide wire range from AWG 28 to 22
- Compact 2.5mm pitch saves board space
Cons
- Female mating housing is not included
- Requires soldering and a matching PCB footprint
- No datasheet or certification details supplied
Best for
Hobbyists and technicians needing a reliable 2-pin board connector
Not ideal for
High-current or high-voltage applications beyond 3A/250V DC
Specifications
| Manufacturer | Boyu |
|---|---|
| Rated Current (A) | 3 |
| Rated Voltage (VDC) | 250 |
| Contact Resistance (ohm) | 20MQ |
| Operating Temperature (°C) | -20 to 85 |
| Wires | AWG #28 to #22 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2510-A 2.5mm 2-pin Relimate Male Connector Through Hole Straight
Frequently Asked Questions
What is the pitch of this connector?
Does it come with the female housing?
What wire sizes can I use?
What are the current and voltage ratings?
How do I mount it on a PCB?
What is the operating temperature range?
Overview
The Boyu 2510-A is a 2.5mm pitch, 2-pin male Relimate connector built for straight through-hole mounting on printed circuit boards. It creates a detachable wire-to-board link that is easy to solder, inspect, and service. With a 3A current rating and 250V DC voltage rating, it suits a wide range of low-power electronic projects where a reliable, repeatable connection is needed.
Key Features
- 2.5mm pitch, 2-pin configuration: A compact footprint for space-constrained boards.
- Straight through-hole design: Pins pass through the PCB for soldering, giving a mechanically strong joint.
- 3A / 250V DC rating: Handles typical signal and low-power loads.
- 20mΩ maximum contact resistance: Helps maintain stable electrical conductivity.
- Wire range AWG 28 to AWG 22: Flexible compatibility with common hook-up wire sizes.
- -20°C to 85°C operating range: Reliable in many indoor and protected outdoor environments.
Specifications Explained
Rated Current (3A): The connector can carry up to 3 amperes continuously, making it suitable for small motors, LED strips, sensor boards, and low-power control circuits. Rated Voltage (250V DC): It is rated for circuits up to 250 volts DC, covering most hobby and prototype electronics. Contact Resistance (20mΩ max): Lower resistance means less energy lost as heat at the contact point, which supports consistent performance. Operating Temperature (-20°C to 85°C): The connector remains functional across a broad temperature span, from cold storage to warm enclosures. Wire Compatibility (AWG 28-22): The crimp or solder side accepts wires from 28 AWG (thin signal wire) up to 22 AWG (slightly thicker power wire), giving you flexibility during assembly.
Compatibility and Requirements
This male connector is designed to mate with a corresponding 2.5mm pitch female Relimate housing (not included). It requires a PCB with through-hole pads spaced at 2.5mm pitch and accepts wires in the AWG 28 to AWG 22 range. Soldering is required for board attachment. No additional hardware is supplied.
Typical Uses
Use the Boyu 2510-A for wire-to-board connections in DIY electronics, prototyping, small robotics, LED lighting projects, sensor breakouts, and repair work. It is also handy for adding a removable power or signal link to custom controller boards and test fixtures.
What's in the Box
1 x 2510-A 2.5mm 2-pin Relimate Male Connector Through Hole Straight.
Quick specs
- Manufacturer
- Boyu
- Rated Current (A)
- 3
- Rated Voltage (VDC)
- 250
- Contact Resistance (ohm)
- 20MQ
- Operating Temperature (°C)
- -20 to 85
- Wires
- AWG #28 to #22















