Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 6-pin female XH-style housing connector on a 2.5mm pitch, supplied with a 300mm 26 AWG wire already fitted. It saves time on repairs and prototypes by giving you a ready-terminated lead for compact electronics wiring.

Key Highlights

  • 6-pin female housing on a 2.5mm pitch spacing
  • 300mm 26 AWG wire pre-attached to the housing
  • Rated 3A AC/DC at up to 250V AC/DC
  • Low 20mΩ contact resistance for stable signal transfer
  • 1000MΩ insulation resistance for reliable isolation
  • Operates from -25°C to 85°C in enclosed equipment

Ideal For

  • Electronics hobbyists building compact prototypes
  • Repair technicians replacing damaged wiring leads
  • Makers wiring small control and sensor circuits
  • Model builders needing removable multi-pin connections
  • Small-batch assemblers sourcing pre-wired connectors

Buying Tip

Check that your mating header uses a 2.5mm pitch and six pins before ordering, since this female housing will only seat on a matching male connector.

Elecvora expert review

Our verdict

A tidy, ready-to-use connector that saves crimping time on small jobs. It is best treated as a low-power part for compact electronics rather than anything demanding high current.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wire already attached, so no crimping tools required
  • Compact 2.5mm pitch suits small boards
  • Clear electrical ratings for planning low-power circuits
  • Wide -25°C to 85°C operating range

Cons

  • Mating header and terminals are not included
  • 26 AWG wire limits it to low-current use
  • Only one connector per pack, so multiples need separate orders

Best for

Compact low-power electronics wiring and repairs

Not ideal for

High-current power distribution or heavy-duty outdoor installations

Specifications

ManufacturerBoyu
Pitch Spacing (mm)2.5
GenderFemale
No. of Pins6
Rated Current (A)3A AC, DC
Rated Voltage (VDC)250V AC, DC
Operating Temperature (°C)-25 to 85
Contact Resistance (ohm)20mΩ
Insulation Resistance (MOhm)1000
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x XH-A/AW 2.5mm 6-pin Female Housing Connector with 300mm Wire (26 AWG)

Frequently Asked Questions

What is the pitch of this connector?
It uses a 2.5mm pitch, meaning the pin centres are 2.5mm apart. Your mating header must match this spacing.
How many pins does it have?
This is a 6-pin female housing connector, so it carries six separate lines.
What voltage and current can it handle?
It is rated for 3A AC/DC at up to 250V AC/DC. Stay within these limits in your design.
Is the wire already attached?
Yes, a 300mm length of 26 AWG wire comes pre-fitted to the housing.
Does the package include the male header?
No. The package contains one female housing connector with wire only; the mating male header is not included.
What temperature range does it support?
It is rated to operate between -25°C and 85°C.

Overview

The Boyu XH-A/AW is a female housing connector with six pins arranged on a 2.5mm pitch. Each unit comes with a 300mm length of 26 AWG wire already attached, which removes the fiddly step of crimping and inserting terminals before you can use it. It is a practical part to keep on hand for repairs, rewiring jobs and prototype work where a compact multi-pin connection is required.

Key Features

  • Six-pin female housing: a single connector handles six separate lines, keeping wiring tidy in tight spaces.
  • 2.5mm pitch: a compact footprint that suits small boards and dense harnesses.
  • Pre-attached 300mm wire: 26 AWG lead is already fitted, so the part is ready to solder or route.
  • Electrical ratings: 3A AC/DC at 250V AC/DC, with 20mΩ contact resistance and 1000MΩ insulation resistance.
  • Temperature range: rated for operation between -25°C and 85°C.

Specifications Explained

The 2.5mm pitch defines the distance between adjacent pin centres, which determines how much board space the mating header will need. Six pins on this pitch give you a compact block for multi-line connections rather than six separate single-wire joins. The 3A current rating at 250V AC/DC places this connector firmly in low-power territory: signal lines, sensor wiring, small control circuits and similar duties. Contact resistance of 20mΩ is low enough to keep voltage drop negligible in short runs, while 1000MΩ insulation resistance indicates good separation between conductors. The -25°C to 85°C window covers most indoor enclosures and sheltered outdoor equipment, but it is not intended for extreme environments.

Compatibility and Requirements

As a female housing, this part accepts mating male pins on the corresponding header. Buyers should confirm that their board or device uses a 2.5mm pitch, 6-pin XH-style interface before ordering. The attached 26 AWG wire is thin and flexible, suited to low-current runs; it is not intended for high-power loads. No mating header, crimp terminals or tools are included, so check what your project already has.

Typical Uses

Common applications include replacing a damaged lead inside a device, extending a short wiring run, connecting a small board to a control panel, and finishing prototype builds where a quick removable connection is useful. Model makers, repair technicians and electronics hobbyists working with compact assemblies are the most likely users.

What's in the Box

  • 1 x XH-A/AW 2.5mm 6-pin Female Housing Connector with 300mm Wire (26 AWG)

Quick specs

Manufacturer
Boyu
Pitch Spacing (mm)
2.5
Gender
Female
No. of Pins
6
Rated Current (A)
3A AC, DC
Rated Voltage (VDC)
250V AC, DC
See all specifications