
1 / 2 · Click to enlarge
At a glance
This battery charging boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Battery Charging Boost Module; input interface Type-C / Solder Pad; batteries required 2S Lithium Battery(Battery Configuration). Check that your power source supplies 8.4V (4.2V per cell) before connecting it.
Key Highlights
- Item Type: Battery Charging Boost Module
- Input Interface: Type-C / Solder Pad
- Batteries Required: 2S Lithium Battery(Battery Configuration)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Battery Charging Boost Module |
|---|---|
| Input Interface | Type-C / Solder Pad |
| Batteries Required | 2S Lithium Battery(Battery Configuration) |
| Charging Voltage | 8.4V (4.2V per cell) |
| Charging Current | Adjustable (0.5 to 0.9 typical) |
| Operating Mode | Charging / Boost Mode depending on input voltage |
| Efficiency | Up to 94% |
| Length (mm) | 31 |
| Width (mm) | 19 |
| Weight (g) | 04 |
| Sensor Type | Strain Gauge Based Load Cell |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 3 cm |
Overview
The Type-C 2S Lithium Battery Charging Boost Module is listed in our battery charging boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Battery Charging Boost Module (note the battery type so you can order spares or the right charger)
- Input Interface: Type-C / Solder Pad (confirm your cable or board uses the same connector)
- Batteries Required: 2S Lithium Battery(Battery Configuration) (note the battery type so you can order spares or the right charger)
- Charging Voltage: 8.4V (4.2V per cell) (check which plug or cable it needs)
- Charging Current: Adjustable (0.5 to 0.9 typical) (check which plug or cable it needs)
- Operating Mode: Charging / Boost Mode depending on input voltage (check which plug or cable it needs)
- Efficiency: Up to 94%
- Length (mm): 31 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Designed for 2S (7.4V) lithium battery packs
- Type-C QC fast charging support
- Built-in boost converter for low-voltage input
- Battery balancing function via BM pin
- Adjustable charging current using resistor
- High efficiency up to 94%
- Dual input: Type-C port or solder pads
- Compact and easy for DIY integration
Package Includes:
1 x Type-C 2S Lithium Battery Charging Boost ModuleQuick specs
- Item Type
- Battery Charging Boost Module
- Input Interface
- Type-C / Solder Pad
- Batteries Required
- 2S Lithium Battery(Battery Configuration)
- Charging Voltage
- 8.4V (4.2V per cell)
- Charging Current
- Adjustable (0.5 to 0.9 typical)
- Operating Mode
- Charging / Boost Mode depending on input voltage













