1 / 3 · Click to enlarge
AI Summary
The Walksnail Avatar HD VRX is a compact receiver that adds 1080p60 digital video to HDMI-compatible FPV goggles. It supports up to 4 km range with dual built-in and two changeable antennas, and runs on 2S-5S power.
Key Highlights
- Adds 1080p60 HD video to HDMI-compatible FPV goggles
- Supports 1080p60, 720p100, and 720p60 HDMI output modes
- Dual built-in directional antennas plus two user-changeable antennas
- Maximum transmission distance of around 4 km
- H.265 compression with minimum 22ms latency
- Lightweight at only 83g and ultra-thin design
Ideal For
- FPV pilots with HDMI-compatible goggles wanting digital HD video
- Freestyle and cinematic pilots using the Avatar HD system
- Long-range FPV flyers needing up to 4 km transmission
- Pilots who want onboard recording to microSD
- Ground station builders looking for a compact receiver
Buying Tip
Check that your goggles accept 1080p60 or 720p100 over HDMI and that you have a 2S-5S battery with a 5.5×2.1mm plug before ordering.
Elecvora expert review
Our verdict
The Walksnail Avatar HD VRX is a practical upgrade for pilots who already own HDMI goggles and want Avatar HD video without replacing their headset. Its lightweight build, flexible power input, and long-range antenna setup make it a solid choice for digital FPV.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Adds 1080p60 digital video to existing HDMI goggles
- Supports up to 4 km range with four antennas
- Lightweight at 83g and ultra-thin
- Flexible 2S-5S power input
- Onboard microSD recording up to 256GB
Cons
- Requires a separate 2S-5S battery or DC source
- Does not include HDMI cable or microSD card
- Transmitter power is region-limited, so range may vary
Best for
FPV pilots with HDMI goggles who want to join the Avatar HD system
Not ideal for
Pilots without HDMI-compatible goggles or a suitable power source
Specifications
| Item Type | FPV System |
|---|---|
| Model No. / Name | Avatar HD VRX |
| Frequency (GHz) | 5.725-5.850GHz |
| Transmitter Power | FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm |
| I/O Interface | HDMI,microSDcardslot,DC5.5*2.1mm |
| HDMI Output | 1080p60fps,720p100fps,720p60fps |
| Power Input | 7-21V(2S-5S) |
| SD Card Support | 256G |
| System | Avatar HD system |
| Shipping Weight | 0.17 kg |
| Shipping Dimensions | 19 × 10 × 3 cm |
What's in the box
- 1 x Walksnails Avatar VRX
Frequently Asked Questions
What goggles work with the Walksnail Avatar HD VRX?
How do I power the VRX?
Does the VRX record video?
What is included in the box?
What is the maximum transmission distance?
How should I care for the VRX?
Overview
The CADDXFPV Walksnail Avatar HD VRX is a dedicated receiver for the Avatar HD digital FPV system. Instead of asking you to buy a new headset, it connects to any HDMI-compatible FPV goggles and delivers a clean digital picture from your aircraft. The VRX outputs 1080p at 60fps, 720p at 100fps, or 720p at 60fps over HDMI, so you can match the mode to your goggles and preference.
At only 83g and with an ultra-thin profile, the VRX is easy to attach to a goggle strap, mount on a tripod, or pack in a case. It accepts 7-21V input (2S-5S), which covers common FPV battery packs, and it records video to microSD cards up to 256GB.
Key Features
- HD digital video: Receives Avatar HD system footage and outputs it over HDMI at up to 1080p60.
- Long-range reception: Two built-in directional antennas and two user-changeable antennas support a maximum transmission distance of around 4 km.
- Low latency: H.265 compression helps keep latency as low as 22ms.
- Flexible power: Works with 7-21V (2S-5S) input via a DC 5.5×2.1mm jack.
- Onboard recording: microSD card slot supports cards up to 256GB.
- Lightweight: Weighs only 83g for minimal impact on your setup.
Specifications Explained
Frequency and power: The VRX operates in the 5.725-5.850GHz band. Transmitter power varies by region: FCC below 30dBm, CE below 14dBm, SRRC below 20dBm, and MIC below 25dBm. These limits are set by local regulations, so performance may differ depending on where you fly.
HDMI output: You can choose 1080p60 for detail, 720p100 for smoother motion, or 720p60 for a balance of both. Make sure your goggles accept the resolution and frame rate you select.
Power input: The 7-21V range means you can power the VRX from a 2S to 5S LiPo battery. Use a battery with enough capacity for your session length, and always respect the voltage limits.
Storage: The microSD slot supports cards up to 256GB, giving you plenty of room for flight recordings. A fast card is recommended for smooth writing.
Compatibility and Requirements
The VRX is designed for the Avatar HD system and works with HDMI-compatible FPV goggles. It does not include goggles, antennas beyond the built-in ones, a power cable, or a microSD card. You will need a 2S-5S battery or another 7-21V DC source with a 5.5×2.1mm plug, plus an HDMI cable to connect to your goggles.
Typical Uses
This receiver suits FPV pilots who already own HDMI goggles and want to try the Avatar HD system without buying a new headset. It is useful for freestyle, cinematic, and long-range flying where you want a clear digital image. The compact size also makes it handy for ground stations and for pilots who switch between goggles.
What's in the Box
Package includes: 1 x Walksnails Avatar VRX.
Quick specs
- Item Type
- FPV System
- Model No. / Name
- Avatar HD VRX
- Frequency (GHz)
- 5.725-5.850GHz
- Transmitter Power
- FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
- I/O Interface
- HDMI,microSDcardslot,DC5.5*2.1mm
- HDMI Output
- 1080p60fps,720p100fps,720p60fps
















