Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 9.3g 4300KV micro brushless motor for 3-4 inch FPV drones, rated for 4S with up to 351g thrust per motor. Its compact 9N12P design and NMB bearings deliver smooth, responsive power for ultralight builds.

Key Highlights

  • 4300KV winding tuned for 4S LiPo micro FPV setups
  • Just 9.3g including wires for ultralight builds
  • Up to 351g max thrust and 225W peak power
  • 7075-T6 aluminium bell with smooth NMB bearings
  • 9N12P stator using 0.15mm Kawasaki silicon steel
  • 12mm PCD and 4 x M2 mounting for common micro frames

Ideal For

  • FPV pilots building 3-4 inch micro freestyle quads
  • Ultralight long-range micro drone builders
  • Cinematic micro FPV pilots wanting smooth throttle response
  • Hobbyists refreshing an existing 4S micro setup

Buying Tip

Confirm your frame uses a 12mm mounting PCD with 4 x M2 screws and that your build runs 4S before ordering this 4300KV motor.

Elecvora expert review

Our verdict

The CAELUS FA1404 4300KV is a sensible micro motor for 3-4 inch 4S builds, combining a low 9.3g weight with useful thrust and quality components. It suits pilots who value smooth response and light builds over extreme top-end power.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very light at 9.3g including wires
  • Up to 351g thrust and 225W peak power on 4S
  • 7075-T6 bell and NMB bearings for durability and smoothness
  • Standard 12mm PCD and 4 x M2 mounting

Cons

  • Rated for 4S only, so 6S builds are not supported
  • Requires soldering and correct ESC setup
  • Propeller and frame compatibility must be checked before purchase

Best for

Ultralight 3-4 inch FPV freestyle, long-range and cinematic micro builds on 4S

Not ideal for

High-voltage 6S racing builds or larger 5-inch quads

Specifications

Item TypeBrushless Motor
Model No. / NameFA1404
Motor KV (RPM/V)4300 KV
Compatible LiPO Batteries4S
Framework9N12P
Shaft Diameter1.6 mm
Motor diameter (mm)18.6
Mounting Hole PCD (mm)12
Mounting Hole Diameter (mm)4 x M2
Max. Power (W)225
Maximum Thrust (gm)351
Cable Length10
Length (mm)18
Weight (g)9.3
Shipping Weight0.1 kg
Shipping Dimensions5 × 5 × 5 cm

What's in the box

  • 1 x CAELUS FA1404 4300KV Brushless Motor
  • 1 x Accessory Set

Frequently Asked Questions

What battery should I use with this motor?
The FA1404 4300KV is designed for 4S LiPo batteries. Use it within that voltage range for the intended performance and reliability.
How much thrust does one motor produce?
Each motor is rated for up to 351g maximum thrust and 225W maximum power, depending on the propeller and setup used.
What size drones is this motor for?
It is intended for 3 to 4 inch micro FPV drones, including freestyle, long-range and cinematic builds.
What is included in the package?
You receive one CAELUS FA1404 4300KV brushless motor and one accessory set.
What mounting pattern does it use?
The motor uses a 12mm mounting hole PCD with 4 x M2 screws and a 1.6mm shaft.
How should I care for the motor?
Keep the bell and bearings clean, check screws regularly, and avoid crashing or bending the 1.6mm shaft. Replace damaged bearings or bells rather than running a vibrating motor.

Overview

The CAELUS FA1404 4300KV is a small-format brushless motor made for 3 to 4 inch FPV drones. At only 9.3g including its wires, it keeps ultralight builds light without giving up thrust. The motor pairs a 4300KV winding with a 9N12P stator and is intended for 4S LiPo power, producing up to 351g of maximum thrust and 225W of peak power per motor.

Build quality is focused on smooth, consistent running. The bell is machined from 7075-T6 aluminium, the bearings are NMB units, and the stator laminations are 0.15mm Kawasaki silicon steel. A 1.6mm shaft and a compact 18.6mm diameter help it fit tight micro frames.

Key Features

  • Lightweight: 9.3g including motor wires.
  • Durable bell: 7075-T6 aluminium construction.
  • Smooth rotation: NMB bearings reduce vibration.
  • Efficient stator: 0.15mm Kawasaki silicon steel laminations.
  • 9N12P configuration: balanced torque delivery for micro quads.
  • Easy wiring: 10mm cable length for tidy installation.

Specifications Explained

KV and Power

4300KV describes how fast the motor spins per volt applied. Combined with 4S LiPo batteries, this winding is suited to 3 to 4 inch propellers on light frames, where it can reach 225W peak power and 351g maximum thrust. Those figures help you judge whether a build will feel quick and responsive without being overweight.

Stator and Bearings

The 9N12P layout uses nine stator arms and twelve magnets. This is a common configuration for small motors and supports steady torque. The 0.15mm silicon steel laminations and NMB bearings contribute to low vibration and consistent output, which matters for stable flight control and clean video.

Mounting and Shaft

The motor measures 18.6mm in diameter and 18mm in length, with a 1.6mm shaft. Mounting holes use a 12mm pitch circle diameter and 4 x M2 screws, matching many micro frame arm patterns. Check your frame and propeller fit before ordering.

Compatibility and Requirements

This motor is designed for 4S LiPo batteries and 3 to 4 inch FPV drone builds. It uses a 12mm mounting hole PCD with 4 x M2 screws and a 1.6mm shaft. You will need a compatible frame, propellers, ESCs and flight controller for your build, plus the usual soldering tools to connect the motor wires.

Typical Uses

The FA1404 suits micro freestyle quads, lightweight long-range cruisers and cinematic micro builds where smooth throttle response and low weight are priorities. Its compact size also makes it a practical choice for refreshing an existing 3 to 4 inch setup.

What's in the Box

  • 1 x CAELUS FA1404 4300KV Brushless Motor
  • 1 x Accessory Set

Quick specs

Item Type
Brushless Motor
Model No. / Name
FA1404
Motor KV (RPM/V)
4300 KV
Compatible LiPO Batteries
4S
Framework
9N12P
Shaft Diameter
1.6 mm
See all specifications