Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A fine slotted alignment screwdriver with a non-conductive, anti-magnetic ceramic blade and anti-static plastic handle. It lets you adjust tiny trimmers and high-frequency circuits without the interference a metal tool can introduce.

Key Highlights

  • Ceramic blade is non-conductive and anti-magnetic
  • Anti-static plastic handle for safe handling of sensitive boards
  • Electrically and thermally insulated for adjustment work
  • Slotted sizes 1.3x0.4mm, 1.8x0.4mm and 2.6x0.4mm
  • No electromagnetic induction and no eddy current loss at high frequency
  • Compact, lightweight tool at just 0.009 kg shipping weight

Ideal For

  • Electronics technicians doing fine trimmer adjustments
  • RF and high-frequency hobbyists tuning small circuits
  • Repair benches handling static-sensitive boards
  • Makers and students working on compact electronics
  • Anyone needing a non-conductive slotted adjustment tool

Buying Tip

Measure the slot width of the trimmer you plan to adjust and pick the matching blade size, since ceramic tips are brittle and a poorly fitting tip can chip.

Elecvora expert review

Our verdict

A specialised, low-cost alignment driver that earns its place on a bench where metal tips cause problems. The ceramic blade and anti-static handle are the reason to choose it over an ordinary slotted screwdriver.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Non-conductive, anti-magnetic ceramic blade
  • Anti-static plastic handle
  • Three slotted sizes in one product line
  • No eddy current loss or electromagnetic induction at high frequency
  • Very light and compact

Cons

  • Ceramic blades are brittle and chip if forced
  • Package contents are not specified
  • Only slotted tips, no Phillips or other profiles

Best for

Fine slotted adjustment on sensitive and high-frequency electronics

Not ideal for

High-torque fastening or prying tasks

Specifications

Item TypeScrewdriver
Screwdriver Size1.3X0.4MM 1.8X0.4MM 2.6X0.4MM
Shipping Weight0.009 kg
Shipping Dimensions16 × 4 × 1 cm

Frequently Asked Questions

What is the ceramic blade for?
The ceramic blade is non-conductive and anti-magnetic, so it does not short or magnetically influence sensitive circuitry the way a metal tip can.
Which sizes are available?
The listed slotted sizes are 1.3x0.4mm, 1.8x0.4mm and 2.6x0.4mm. Check your adjustment slot against these before ordering.
Does it need a battery or power supply?
No. It is a hand tool with no electrical power requirement.
Can I use it on high-frequency circuits?
It is described as producing no electromagnetic induction and no eddy current loss in high-frequency work, which is the intended use case.
What is included in the package?
Package contents are not specified in the available data, so confirm the included items with the listing before purchase.
How should I care for the ceramic tip?
Use light torque, avoid dropping the tool and store it where the blade is protected. Ceramic is hard but can chip under impact or twisting force.

Overview

The CD-20T is a precision slotted alignment screwdriver made for small, sensitive adjustment work. Its defining feature is the ceramic blade, which is non-conductive and anti-magnetic, paired with an anti-static plastic handle. Where a conventional steel driver can couple into a circuit or be pulled by a magnetic field, this tool is designed to stay electrically and thermally insulated while you work.

Three slotted blade sizes are listed: 1.3x0.4mm, 1.8x0.4mm and 2.6x0.4mm. That spread covers a range of tiny trimmer and adjustment points, from the smallest slots up to slightly larger ones.

Key Features

  • Ceramic blade: non-conductive and anti-magnetic, so it does not behave like a metal tip near sensitive parts.
  • Anti-static plastic handle: supports safe handling of boards and components that are vulnerable to static.
  • Electrically and thermally insulated: useful when adjustment points sit close to other circuitry.
  • High-frequency friendly: no electromagnetic induction and no eddy current loss in high-frequency work.
  • Three slotted sizes: 1.3x0.4mm, 1.8x0.4mm and 2.6x0.4mm.
  • Light and compact: shipping weight is just 0.009 kg, with shipping dimensions of 16 x 4 x 1 cm.

Specifications Explained

Blade sizes

The three figures, 1.3x0.4mm, 1.8x0.4mm and 2.6x0.4mm, describe slotted tips of increasing width. Match the tip to the slot you are adjusting: a tip that is too wide will not seat, and one that is too narrow can slip and damage a soft adjustment point.

Ceramic and insulation

Ceramic is the reason this driver is non-conductive and anti-magnetic. That matters when you are working near live or sensitive circuitry and want to avoid shorting or magnetically influencing a component. The electrical and thermal insulation extends that protection to the handle and shaft assembly.

High-frequency behaviour

In high-frequency circuits, metal tools can introduce eddy current loss and electromagnetic induction. This ceramic driver is described as free of both, which is why it is offered for high-frequency range adjustment.

Handling and storage

At 0.009 kg shipping weight and 16 x 4 x 1 cm packed, the tool is easy to keep in a bench drawer or tool roll. Ceramic tips are hard but brittle, so store it where the blade will not be knocked.

Compatibility and Requirements

This is a hand tool and needs no power source. It fits slotted adjustment points that match one of the three listed blade sizes. No further compatibility details are provided, so check the slot width on your device against the listed sizes before use.

Typical Uses

  • Adjusting small slotted trimmers and preset controls
  • Fine work on high-frequency circuits where metal tools interfere
  • Bench work on static-sensitive electronics
  • General precision slotted adjustment in repair and hobby settings

What's in the Box

Package contents are not specified in the available product data. Confirm the included items with the listing before ordering.

Quick specs

Item Type
Screwdriver
Screwdriver Size
1.3X0.4MM 1.8X0.4MM 2.6X0.4MM
Shipping Weight
0.009 kg
Shipping Dimensions
16 × 4 × 1 cm
See all specifications