
1 / 6 · Click to enlarge
AI Summary
A fully assembled MK8 extruder kit with a 0.3mm nozzle, NEMA stepper motor and 12V cooling fan for 1.75mm PLA and ABS. It saves build time because the hotend and extruder arrive pre-built and ready to mount.
Key Highlights
- Fully assembled MK8 extruder kit, ready for mounting
- 0.3mm nozzle for finer detail with 1.75mm filament
- All-metal extruder body with aluminium heating block
- NEMA stepper motor with stepper cable and heat sleeve
- 12V cooling fan with guard and 100K NTC thermistor
- Direct transmission design, compact and 550g light
Ideal For
- DIY 3D printer builders assembling a custom machine
- Makers replacing a worn or jam-prone extruder assembly
- Users who keep spare hotends for quick filament swaps
- Hobbyists printing small parts needing finer detail
Buying Tip
Confirm your printer runs a 12V hotend and fan supply before ordering, since the included heater and fan are 12V rated with a 24V fan option.
Elecvora expert review
Our verdict
A practical pre-assembled MK8 kit that removes much of the parts-sourcing and assembly work from a hotend replacement. The 0.3mm nozzle and 12V setup make it a focused choice for detail-oriented PLA and ABS printing rather than high-throughput work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Arrives assembled, saving build time
- All-metal extruder with NEMA stepper motor included
- 0.3mm nozzle suits fine detail
- Lever mechanism simplifies filament changes
Cons
- 0.3mm nozzle is slower for large prints
- 250 degree maximum limits higher-temperature materials
- 12V heater means voltage must match your printer
Best for
DIY builders and repairers wanting a ready-made 0.3mm MK8 hotend assembly
Not ideal for
Users needing high-flow output or materials above 250 degrees
Specifications
| Item Type | Kit |
|---|---|
| Supported Nozzle Diameter (mm) | 0.3 |
| Filament Diameter | 1.75 |
| Assembled (Y/N) | Yes |
| Movement Axis Speed | 40m |
| Nozzle Flow Rate (cc/h) | 24 |
| Printing Material | ABS, PLA |
| Cooling Fan Voltage | 12V (24V optional) |
| Extrusion Head Heating (V) | 12 |
| Length (mm) | 130 |
| Width (mm) | 130 |
| Weight (g) | 550 |
| Shipping Weight | 0.6 kg |
| Shipping Dimensions | 15 × 10 × 9 cm |
What's in the box
- 1 x Complete assembled MK8 extruder with 0.3mm nozzle
- 1 x Cooling fan with guard grille
- 1 x MK8 black heatsink
- 1 x MK8 all-metal extruder
- 1 x NEMA stepper motor
- 1 x Heating block
- 1 x 0.3mm nozzle
- 1 x Single-end cartridge heater
- 1 x Stepper motor cable with heat-protective sleeve
- 1 x 100K NTC thermistor with hard cable
Frequently Asked Questions
Is the extruder already assembled?
What filament can I use?
What voltage does it need?
What is included in the box?
How do I change filament?
How should I maintain it?
Overview
The Complete Kit of MK8 Extruder with 0.3mm Nozzle is a single-head extrusion assembly supplied already assembled. It is aimed at DIY builders, repairers and makers who want a replacement or spare hotend setup without sourcing each part separately. The kit pairs an all-metal MK8 extruder with a NEMA stepper motor, a heating block, a cartridge heater and a 100K NTC thermistor, so the main mechanical and thermal components arrive together.
The 0.3mm nozzle is the defining feature. It is smaller than common general-purpose sizes, which makes it a sensible choice when fine surface detail and controlled extrusion matter more than raw output. The assembly accepts 1.75mm filament and is intended for PLA and ABS.
Key Features
- Pre-assembled: the extruder, motor and hotend parts come put together, reducing setup work.
- 0.3mm nozzle: supports detailed printing with 1.75mm filament.
- All-metal extruder: a direct transmission design without heavy gearing, keeping the unit compact.
- NEMA stepper motor: included with a stepper motor cable and heat-protective sleeve.
- Cooling fan: 12V fan with guard grille supplied.
- Lever mechanism: makes filament insertion and extraction straightforward.
Specifications Explained
The 0.3mm nozzle diameter sets the resolution and flow behaviour you can expect. A 24cc/h nozzle flow rate is modest, which suits careful, detailed work rather than high-speed bulk output. The 40m movement axis speed figure describes the motion rating linked to the assembly.
Heating runs at 12V, with a 12V cooling fan and a 12V single-end cartridge heater; a 24V fan option is listed. The thermistor is a 100K NTC type with a hard cable. The assembly measures 130mm by 130mm and weighs 550g, so it adds limited mass to a gantry.
Compatibility and Requirements
Use 1.75mm filament in PLA or ABS. The kit is designed around a 12V electrical supply, with a 24V cooling fan option available. The maximum hotend operating temperature is 250 degrees, so material choice should stay within that limit. Nozzle diameter support is stated as 0.3mm.
Typical Uses
This kit suits DIY 3D printer builds, replacement of a worn extruder assembly, and users who keep spare hotend assemblies for quick swaps between filaments or nozzle sizes. The fine nozzle also appeals to makers printing small parts and detailed models.
What's in the Box
- 1 x Complete assembled MK8 extruder with 0.3mm nozzle
- 1 x Cooling fan with guard grille
- 1 x MK8 black heatsink
- 1 x MK8 all-metal extruder
- 1 x NEMA stepper motor
- 1 x Heating block
- 1 x 0.3mm nozzle
- 1 x Single-end cartridge heater
- 1 x Stepper motor cable with heat-protective sleeve
- 1 x 100K NTC thermistor with hard cable
Quick specs
- Item Type
- Kit
- Supported Nozzle Diameter (mm)
- 0.3
- Filament Diameter
- 1.75
- Assembled (Y/N)
- Yes
- Movement Axis Speed
- 40m
- Nozzle Flow Rate (cc/h)
- 24














