
1 / 7 · Click to enlarge
AI Summary
This advanced component kit includes an ATmega2560 board, RAMPS 1.4 shield, five DRV8825 stepper drivers, and a 128x64 LCD controller for building or upgrading a 3D printer. The LCD with rotary encoder and SD card slot lets you operate your printer without a computer.
Key Highlights
- ATmega2560 microcontroller with 54 digital I/O pins and 16 MHz crystal
- RAMPS 1.4 shield supports five Pololu-style stepper driver boards
- Five DRV8825 stepper drivers with heat sinks for precise motor control
- 128x64 graphic LCD with rotary encoder and SD card reader
- USB Type B connectivity for direct programming
- Modular design for easy service, replacement, and expansion
Ideal For
- DIY enthusiasts building a RepRap-style 3D printer
- Makers upgrading an existing 3D printer controller
- Workshops needing standalone SD card printing
- Electronics hobbyists comfortable with assembly and soldering
Buying Tip
Confirm that your printer's motors and power supply are compatible with the DRV8825 drivers and RAMPS 1.4 board before purchasing, and note that assembly is required.
Elecvora expert review
Our verdict
A solid choice for anyone building or upgrading a RepRap-style printer, this kit offers a well-known combination of ATmega2560, RAMPS 1.4, and DRV8825 drivers with the convenience of an LCD controller for standalone printing. It requires assembly and additional parts, but provides a flexible and expandable foundation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes five DRV8825 drivers with heat sinks
- LCD controller enables SD card printing without a PC
- Modular design for easy upgrades and repairs
- Ample I/O for accessories and expansion
Cons
- Ships unassembled; soldering and assembly required
- No power supply or motors included
- Firmware configuration needed for specific printers
Best for
DIY 3D printer builders and upgraders
Not ideal for
Users seeking a plug-and-play solution
Specifications
| Item Type | Kit |
|---|---|
| Model No. / Name | Component Kit |
| Compatibility | 3D Printer |
| Assembled (Y/N) | N |
| Driver | DRV 8825 |
| USB | Type B |
| Microcontroller | ATmega2560 |
| LCD Screen | 128 x 64 |
| Integr. Crystal Freq. (MHz) | 16 Mhz |
| Digital I/O Pins | 54 digital I/O terminals, (14 of which have programmable PWM outputs) |
| Shipping Weight | 0.56 kg |
| Shipping Dimensions | 30 × 30 × 10 cm |
Frequently Asked Questions
What is included in this kit?
Can I use this kit with my existing 3D printer?
Do I need a computer to print with this kit?
What power supply is required?
Is soldering required?
How do I upload firmware?
Overview
The Unbranded Component Kit for 3D Printer - Advance bundles the core electronics needed to power a RepRap-style 3D printer. Whether you are building a new machine from scratch or upgrading an existing controller, this kit provides a proven combination: an ATmega2560 microcontroller board, a RAMPS 1.4 shield, five DRV8825 stepper drivers with heat sinks, and a 128x64 graphic LCD smart controller. The modular architecture lets you replace or upgrade individual components easily, and the included LCD with rotary encoder and SD card reader enables standalone operation—no computer required during printing.
Key Features
- ATmega2560 core: 54 digital I/O terminals (14 with PWM), 16 MHz crystal, and USB Type B for programming.
- RAMPS 1.4 shield: Designed to host the entire electronics stack for a RepRap, with plug-in stepper drivers and expansion headers.
- Five DRV8825 drivers: Each supplied with a heat sink for reliable stepper motor control.
- 128x64 LCD smart controller: Includes SD card reader and rotary encoder for menu navigation and file selection.
- Expandable: I2C and SPI pins remain available, and MOSFETs are hooked to PWM pins for versatile heater and fan control.
Specifications Explained
The ATmega2560 microcontroller offers 54 digital I/O pins, 14 of which support PWM outputs, giving you ample connectivity for endstops, heaters, fans, and accessories. The 16 MHz crystal ensures stable timing for precise motion control. The RAMPS 1.4 shield fits five Pololu-style stepper driver modules, and the included DRV8825 drivers are known for quiet operation and fine microstepping. The 128x64 LCD provides a clear interface for monitoring and controlling prints, while the integrated SD card reader lets you print directly from G-code files. USB Type B connectivity allows you to upload firmware and communicate with the board from a computer.
Compatibility and Requirements
This kit is designed for 3D printers that accept RAMPS 1.4 and ATmega2560-based controllers. It is compatible with RepRap-style machines and many DIY printer designs. The kit ships unassembled, so basic soldering and assembly skills are required. You will need to provide your own stepper motors, heaters, thermistors, endstops, and power supply appropriate for your printer. The RAMPS shield includes a heated bed control with an additional 11A fuse, and the MOSFETs are wired to PWM pins for flexible heater and fan management.
Typical Uses
This component kit is ideal for building a new 3D printer, upgrading an older controller to a more modular system, or maintaining a spare set of electronics for rapid repairs. The standalone LCD controller is especially useful for managing prints without a PC, making it suitable for workshops and production environments.
What's in the Box
Package contents are not specified by the manufacturer. Please refer to the product listing for details on included items.

Quick specs
- Item Type
- Kit
- Model No. / Name
- Component Kit
- Compatibility
- 3D Printer
- Assembled (Y/N)
- N
- Driver
- DRV 8825
- USB
- Type B













