
1 / 2 · Click to enlarge
At a glance
This vibration/tilt sensor and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Tilt Sensor Module; length (mm) 22; width (mm) 5.
Key Highlights
- Model No. / Name: Tilt Sensor Module
- Length (mm): 22
- Width (mm): 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Tilt Sensor Module |
|---|---|
| Length (mm) | 22 |
| Width (mm) | 5 |
| Weight (g) | 1 each |
| Contact Capacity | 60 V MAX, 0.25 A MAX, 3 VA MAX |
| Contact Resistance (ohm) | 30 Ω MAX Measured 10° Below Horizontal at 5 VDC |
| Angle (FOV) | Make angle: 10° MAX Below Horizontal, Break Angle: 10° MAX Above Horizontal, Differential Angle: 15° MAX |
| Operating Temperature (°C) | -37° to 100°C |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9 × 7 × 1 cm |
Overview
The COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, Nickel is listed in our vibration/tilt sensor and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Tilt Sensor Module
- Length (mm): 22 (measure your mounting space before ordering)
- Width (mm): 5 (measure your mounting space before ordering)
- Weight (g): 1 each (important for drones, RC models and anything you carry)
- Contact Capacity: 60 V MAX, 0.25 A MAX, 3 VA MAX
- Contact Resistance (ohm): 30 Ω MAX Measured 10° Below Horizontal at 5 VDC
- Angle (FOV): Make angle: 10° MAX Below Horizontal, Break Angle: 10° MAX Above Horizontal, Differential Angle: 15° MAX
- Operating Temperature (°C): -37° to 100°C
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The CW1300-1 from Comus is a nonmercury tilt sensor. These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential angle. It is very important when designing a tilt switch to allow the differential angle and understand that when in the horizontal position the switch contact may be open or closed.
Features:
- Resistant to Ambient Environmental Conditions
- Case Material Tin Plated
- Hermetically Sealed & Inert Gas Filled
- Customization Available
Package Includes:
1 x COMUS Tilt Switch, 15 °, 60 Vac, 0.25 A, NickelQuick specs
- Model No. / Name
- Tilt Sensor Module
- Length (mm)
- 22
- Width (mm)
- 5
- Weight (g)
- 1 each
- Contact Capacity
- 60 V MAX, 0.25 A MAX, 3 VA MAX
- Contact Resistance (ohm)
- 30 Ω MAX Measured 10° Below Horizontal at 5 VDC













