
1 / 3 · Click to enlarge
AI Summary
A tiny infrared slot sensor module with a 10 mm gap and LM393 comparator that outputs a clean digital signal when an object breaks the beam. It connects directly to a microcontroller for counting, speed sensing or position detection.
Key Highlights
- 10 mm optical coupling slot for reliable object detection
- LM393 comparator delivers a clean digital output signal
- Wide 3.6 to 5 VDC operating voltage range
- On-board LEDs indicate output state and power
- Directly connects to MCU GPIO for easy counting
- Compact 27.6 x 20 mm board weighs only 4 g
Ideal For
- Makers building small robots with wheel encoders
- Students learning about sensors and microcontrollers
- Hobbyists adding object counting to conveyor projects
- DIY enthusiasts measuring motor speed
- Electronics beginners needing a simple digital sensor
Buying Tip
Check that the objects you need to detect will fit through the 10 mm slot, as the sensitivity is fixed and cannot be adjusted.
Elecvora expert review
Our verdict
This sensor module is a straightforward solution for adding slot detection to low-voltage projects. Its compact size and direct MCU compatibility make it easy to integrate, though the fixed sensitivity limits it to objects that fit the 10 mm gap.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple digital output connects directly to microcontrollers
- Wide 3.6-5 V operating range suits many logic systems
- Very small and lightweight for tight spaces
- On-board LEDs help with setup and troubleshooting
Cons
- Sensitivity is not adjustable
- Only detects objects that fit within the 10 mm slot
- Requires soldering or jumper wires for connections
Best for
Hobbyists and students needing a compact slot sensor for counting or speed measurement
Not ideal for
Applications requiring adjustable sensitivity or detection of large objects
Specifications
| Model No. / Name | Photoelectric Sensor Module |
|---|---|
| Operating Voltage (VDC) | 3.6 to 5 |
| Main Chip | LM393 |
| Avg. Current Consumption | 33 |
| Length (mm) | 27.6 |
| Width (mm) | 20 |
| Weight (g) | 4 |
| Additional Specs. | width of the optical coupling slot: 10 mm |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6 × 10 × 2 cm |
What's in the box
- 1 x Correlation photoelectric infrared count slot sensor module
Frequently Asked Questions
What is the output signal type?
Can I connect it directly to an Arduino?
What is the width of the slot?
Is the sensitivity adjustable?
What is included in the package?
How much current does it draw?
Overview
This correlation photoelectric infrared count slot sensor module is a small, ready-to-use board for detecting objects that pass through a 10 mm gap. An infrared emitter and detector face each other across the slot, and an LM393 comparator converts the analogue signal into a digital output. The module is designed for low-voltage electronics projects and can be connected directly to a microcontroller, letting your code count pulses, measure speed or trigger actions when the beam is interrupted.
Key Features
- 10 mm slot width: suits small workpieces, wheel spokes and other narrow targets.
- LM393 comparator: provides a stable digital output with hysteresis.
- Wide supply range: operates from 3.6 to 5 VDC, compatible with common logic levels.
- Visual indicators: red LED lights when no object is present; green LED indicates the output state.
- Compact and light: the board measures 27.6 x 20 mm and weighs only 4 g.
- Direct MCU connection: the OUT pin can be wired straight to a microcontroller input.
Specifications Explained
Operating voltage (3.6 to 5 VDC): the module can be powered from a 3.3 V or 5 V rail, making it suitable for a wide range of development boards and battery-powered projects.
LM393 comparator: this chip compares the received infrared intensity against a reference and outputs a clean low or high signal. The output is low when no object is in the slot, and high when an object blocks the beam.
Average current consumption (33 mA): the module draws a modest current, so it will not significantly drain small batteries in portable builds.
Optical slot width (10 mm): the gap determines the maximum size of object that can pass through and be detected. The sensitivity is fixed and not adjustable.
Dimensions and weight: at 27.6 x 20 mm and 4 g, the board fits easily into tight enclosures and adds negligible weight to moving parts.
Compatibility and Requirements
The module requires a DC supply between 3.6 and 5 V. It is designed to interface with microcontrollers and other logic devices that accept a digital input. No additional components are needed for basic operation, but you will need a power source and a way to connect the pins (for example, jumper wires or a soldered header). The output is a single digital signal; it does not provide an analogue output or adjustable threshold.
Typical Uses
- Counting wheel rotations on small robots and model vehicles
- Workpiece counting on DIY conveyor systems
- Motor speed measurement and feedback
- Position sensing for 3D printers and CNC projects
- Object detection in educational and hobby electronics
What's in the Box
1 x Correlation photoelectric infrared count slot sensor module.
Quick specs
- Model No. / Name
- Photoelectric Sensor Module
- Operating Voltage (VDC)
- 3.6 to 5
- Main Chip
- LM393
- Avg. Current Consumption
- 33
- Length (mm)
- 27.6
- Width (mm)
- 20













