Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 15 mm slot photoelectric sensor module detects objects breaking an infrared beam and outputs a digital signal for microcontrollers. Its LM393 comparator ensures clean switching for reliable counting and speed measurement.

Key Highlights

  • 15 mm wide optical coupling slot for object detection
  • LM393 comparator provides stable digital output
  • Works with 3.6 to 5 VDC power supply
  • Onboard LEDs indicate power and output status
  • Compact 22 x 20 mm board weighs only 5 g
  • Direct connection to MCU, Arduino, or Raspberry Pi

Ideal For

  • Arduino and Raspberry Pi enthusiasts building counting projects
  • Makers automating small production or sorting systems
  • Robotics hobbyists needing motor speed feedback
  • Students learning about sensors and microcontrollers

Buying Tip

Check that the objects you need to detect fit within the 15 mm slot width and that your power supply is within 3.6 to 5 VDC.

Elecvora expert review

Our verdict

This sensor module offers a simple and effective way to add object detection or counting to microcontroller projects, with a clean digital output and compact size. It is well-suited for hobbyist and educational use where a fixed 15 mm slot width is acceptable.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy to interface with common microcontrollers
  • Onboard LEDs provide clear status indication
  • Compact and lightweight design
  • Wide operating voltage range

Cons

  • Sensitivity is not adjustable
  • Slot width may be too small for larger objects
  • No mounting holes or hardware included

Best for

Hobbyist and educational projects needing simple object counting or speed detection

Not ideal for

Industrial environments requiring adjustable sensitivity or larger detection gaps

Specifications

Model No. / NamePhotoelectric Sensor Module
Operating Voltage (VDC)3.6 to 5
Main ChipLM393
Avg. Current Consumption33
Length (mm)22
Width (mm)20
Weight (g)5
Additional Specs.width of the optical coupling slot: 15 mm
Shipping Weight0.01 kg
Shipping Dimensions4 × 3 × 1 cm

What's in the box

  • 1 x Correlation Photoelectric Infrared Count Slot Sensor Module

Frequently Asked Questions

What is the output signal type?
The module provides a single digital output (OUT) that is low when no object is in the slot and high when the beam is blocked.
Can I connect this directly to an Arduino?
Yes, the OUT pin can be connected directly to any digital input pin on an Arduino or similar microcontroller.
What is the power supply requirement?
The module operates from 3.6 to 5 VDC and draws approximately 33 mA on average.
Is the sensitivity adjustable?
No, the sensitivity is fixed and cannot be adjusted.
What is included in the package?
The package includes one Correlation Photoelectric Infrared Count Slot Sensor Module.
How do I know if the module is working?
The onboard red LED lights when the output is low (no object), and the green LED indicates a high output (object present).

Overview

The Correlation Photoelectric Infrared Count Slot Sensor Module is a compact, ready-to-use detection board that senses when an object interrupts an infrared beam across a 15 mm slot. At its heart is an LM393 voltage comparator, which converts the analog signal from the phototransistor into a clean digital output. This makes the module easy to connect to microcontrollers such as Arduino, Raspberry Pi, or other MCU platforms for counting, speed measurement, and position feedback.

With an operating voltage range of 3.6 to 5 VDC and average current consumption of about 33 mA, the module suits many low-power electronics projects. The board measures just 22 mm by 20 mm and weighs 5 grams, so it can be mounted in tight enclosures or on small mechanisms without adding significant bulk.

Key Features

  • 15 mm optical slot: Wide enough for small workpieces, gears, or encoder discs to pass through and break the beam.
  • LM393 comparator: Provides a sharp digital output with hysteresis for reliable switching.
  • Signal output indication: A red LED lights when the output is low (no object), and a green LED indicates a high output (object present).
  • Single signal output: The OUT pin delivers a simple high/low signal that microcontrollers can read directly.
  • Compact and lightweight: The 22 x 20 mm board and 5 g weight make it easy to integrate into space-constrained designs.

Specifications Explained

Operating voltage (3.6 to 5 VDC): The module can be powered from a 3.3 V or 5 V logic supply, making it compatible with most hobbyist and embedded platforms. Average current consumption (33 mA): This is low enough for battery-powered projects, though continuous operation will draw a small but noticeable current. Optical coupling slot width (15 mm): This is the gap between the infrared emitter and receiver; objects up to 15 mm wide can be detected as they pass through. LM393 chip: A dual comparator that ensures the output switches cleanly between logic levels, reducing false triggers from noise. Dimensions and weight: The small footprint (22 x 20 mm) and light weight (5 g) allow for flexible mounting with double-sided tape or screws (not included).

Compatibility and Requirements

The module is designed to connect directly to microcontrollers and single-board computers that accept digital inputs. It requires a DC power supply within the 3.6 to 5 VDC range. No additional components are needed for basic operation, but you will need a way to mount the sensor and a microcontroller to read the output. The OUT pin can be connected to any GPIO pin configured as an input. Note that the sensitivity is not adjustable, so the detection threshold is fixed.

Typical Uses

  • Counting workpieces on a conveyor or in a feeder
  • Measuring motor speed using a slotted disc or gear
  • Position detection for linear actuators or rotating mechanisms
  • Pulse counting in DIY automation and robotics projects
  • Object presence detection in small-scale sorting systems

What's in the Box

1 x Correlation Photoelectric Infrared Count Slot Sensor Module.

Quick specs

Model No. / Name
Photoelectric Sensor Module
Operating Voltage (VDC)
3.6 to 5
Main Chip
LM393
Avg. Current Consumption
33
Length (mm)
22
Width (mm)
20
See all specifications