
1 / 3 · Click to enlarge
AI Summary
A full-metal aluminium alloy extruder replacement kit for Ender-3 and CR-10 series printers, with a dual-gear feed and an adjustable pressure screw. It bolts on in place of the original plastic extruder for firmer, more even filament feeding.
Key Highlights
- Full-metal aluminium alloy construction for durability
- Dual-gear extrusion mechanism for firm, even filament feed
- Adjustable screw to tune gearbox pressure as needed
- Direct replacement for the original plastic extruder
- Fits Ender-3, Ender-5 and CR-10 series models
- Lightweight kit at around 60 g
Ideal For
- Owners of compatible Ender-3 and Ender-5 printers replacing a worn plastic extruder
- CR-10 series users wanting a firmer, more even filament feed
- Hobbyists comfortable assembling a small kit before fitting it
- Makers doing regular printing who want a durable metal extruder body
- Users who want to adjust extruder gear pressure for different filaments
Buying Tip
Confirm your printer model appears in the compatibility list before ordering, and remember the kit arrives unassembled, so set aside time to build it before removing your old extruder.
Elecvora expert review
Our verdict
A sensible, low-cost upgrade for owners of compatible Creality printers who are tired of the original plastic extruder. The dual-gear feed and adjustable pressure screw give you more control over filament grip, provided you are happy to assemble and fit it yourself.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Aluminium alloy body is more durable than the stock plastic part
- Dual-gear mechanism supports a firm, even filament feed
- Adjustable screw lets you tune gearbox pressure
- Fits a broad list of Ender-3, Ender-5 and CR-10 models
- Light at around 60 g
Cons
- Supplied as a kit that must be assembled before fitting
- Compatibility is limited to the listed Creality models
- Installation requires removing the original extruder yourself
Best for
Creality owners replacing a worn or inconsistent plastic extruder
Not ideal for
Printers outside the listed compatibility range
Specifications
| Item Type | Kit |
|---|---|
| Compatibility | Ender-3 V2, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-5 Plus, Ender-5, Ender-5 Pro, CR-10, CR-10 S4, CR-10 S5, CR-10s, CR-10mini, Ender-3S, Ender-5S |
| Material | Aluminium, Alloy |
| Color | Red, Silver |
| Weight (g) | 60 |
| Shipping Weight | 0.067 kg |
| Shipping Dimensions | 14 × 5 × 12 cm |
What's in the box
- 1 x CR-10 Series Extrusion Kit
Frequently Asked Questions
Which printers does this extrusion kit fit?
Does the kit arrive assembled?
How difficult is installation?
Can I adjust how firmly the gears grip the filament?
What material is the extruder made from?
What is included with the kit?
Overview
The Creality CR-10 Series Extrusion Kit is a metal extruder assembly designed to replace the original plastic extruder on many Creality machines. The body is made from aluminium alloy in a red and silver finish, giving the extruder a more rigid structure than the stock plastic part. Inside, a dual-gear mechanism pulls filament through with a firm grip, which helps keep the feed consistent during long prints.
This is a kit, so it needs to be assembled before fitting. Once built, installation follows the same route as the original part: unscrew the old extruder from the printer and fasten the new metal unit in its place.
Key Features
- Dual-gear extrusion: two gears grip the filament for a steady, uniform feed.
- Adjustable pressure: a dedicated screw lets you set the pressure of the extruder gearbox to suit your filament and setup.
- Full-metal build: aluminium alloy construction resists wear better than the original plastic housing.
- Straightforward swap: designed as a replacement for the stock extruder on compatible printers.
- Light footprint: the kit weighs around 60 g, so it adds very little mass to the machine.
Specifications Explained
Material: aluminium alloy gives the extruder body stiffness and durability, which matters because the extruder is under constant spring and gear pressure. Dual-gear mechanism: two driven gears share the load and grip the filament on both sides, which supports a more uniform feed than a single drive gear. Adjustable screw: because different filaments behave differently, the ability to change gearbox pressure lets you fine-tune how firmly the filament is held. Weight: at roughly 60 g, the kit is light enough that it will not noticeably change the motion behaviour of the print head assembly.
Compatibility and Requirements
The kit is listed as compatible with Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-3 Max, Ender-5, Ender-5 Pro, Ender-5S, Ender-5 Plus, CR-10, CR-10s, CR-10mini, CR-10 S4 and CR-10 S5. Check your model against this list before ordering. Assembly of the kit is required before installation, and you will need the usual hand tools to remove the original extruder and fit the replacement.
Typical Uses
This kit is aimed at owners of compatible Creality printers who want to move away from the original plastic extruder. It is useful when the stock part has worn, when filament feed has become inconsistent, or simply as a preventive upgrade on a machine that sees regular printing. It suits hobbyists printing in common materials who want a firmer, more controllable grip on the filament.
What's in the Box
1 x CR-10 Series Extrusion Kit.
Quick specs
- Item Type
- Kit
- Compatibility
- Ender-3 V2, Ender-3 Max, Ender-3, Ender-3 Pro, Ender-5 Plus, Ender-5, Ender-5 Pro, CR-10, CR-10 S4, CR-10 S5, CR-10s, CR-10mini, Ender-3S, Ender-5S
- Material
- Aluminium, Alloy
- Color
- Red, Silver
- Weight (g)
- 60
- Shipping Weight
- 0.067 kg


















