Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A refurbished Creality K1C FDM 3D printer with a 220 x 220 x 250 mm build volume and 600 mm/s printing speed. Its dual-gear direct drive extruder and heated bed support materials from PLA to PA-CF.

Key Highlights

  • 220 x 220 x 250 mm build volume for larger, detailed models
  • 600 mm/s printing speed with acceleration up to 20000 g
  • Dual-gear direct drive extruder for reliable filament feeding
  • Nozzle up to 300 °C and heatbed up to 100 °C
  • 4.3-inch colour touchscreen plus USB and WiFi transfer
  • Inspected and tested refurbished unit in like-new condition

Ideal For

  • Makers printing functional parts and prototypes
  • Hobbyists moving up to faster FDM printing
  • Users wanting to print engineering filaments such as PA, PC and ASA
  • Beginners who value a touchscreen and WiFi workflow
  • Buyers seeking new-printer performance at a lower cost

Buying Tip

Confirm your slicer is set to Cura 5.0 or later, or use Creality Print, and check that the refurbished unit's test report is included before you buy.

Elecvora expert review

Our verdict

The refurbished K1C pairs a generous build volume with high rated speed and a material-friendly hotend, making it a strong value option for makers who want capability without paying new-unit prices. The repaired extrusion issue is reported as resolved and the unit tested, though buyers should still verify condition on arrival.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Large 220 x 220 x 250 mm build volume
  • High 600 mm/s rated speed and 20000 g acceleration
  • Dual-gear direct drive extruder handles flexible and composite filaments
  • Touchscreen plus USB and WiFi connectivity
  • Inspected, repaired and tested refurbished unit

Cons

  • Refurbished condition means minor prior use, reported at around five hours
  • Single 0.4 mm nozzle supplied, limiting very fine or very fast large-layer work
  • Nozzle and bed temperatures cap at 300 °C and 100 °C, so some high-temperature materials are out of scope

Best for

Makers wanting a fast, roomy FDM printer at refurbished pricing

Not ideal for

Buyers who require a factory-sealed new unit or very high-temperature materials

Specifications

Model SeriesK1 Series
Print Size (L x W x H) (mm)220 x 220 x 250
Machine Size (mm)355 x 355 x 480
Printing Speed600
Model No. / NameK1C
TechnologyFDM
Power Rating350
Acceleration (g)Less than or equal to 20000
Layer Height0.1-0.35mm
Extruder TypeDual-gear direct drive
Filament Diameter1.75
Supported Nozzle Diameter (mm)0.4 mm
Nozzle TemperatureLess than or equal to 300 Deg C
Heatbed TemperatureLess than or equal to 100
Data Transmission MethodUSB drive, WiFi
Screen Type4.3" color touch screen
Supported SoftwareCreality Print, Cura 5.0, Cura 5.0 later version
File FormatsSTL, OBJ, 3MF
Filament CompatibilityPLA, ABS, PETG, TPU, PA, PC, ASA, PET, PLA-CF, PET-CF, PA-CF
Length (mm)355
Width (mm)355
Shipping Weight16.36 kg
Shipping Dimensions44.1 × 44.1 × 57.8 cm

Frequently Asked Questions

What condition is this refurbished printer in?
It has been fully inspected and professionally repaired, with the original slipping-gear extrusion issue resolved. It is reported to be in like-new condition with around five hours of testing use and no visible damage.
What materials can it print?
It supports PLA, ABS, PETG, TPU, PA, PC, ASA, PET, PLA-CF, PET-CF and PA-CF, using 1.75 mm filament.
What are the temperature limits?
The nozzle can reach up to 300 °C and the heated bed up to 100 °C.
How do I transfer print files?
You can use a USB drive or connect over WiFi, and files can be prepared in Creality Print or Cura 5.0 and later in STL, OBJ or 3MF format.
What is the build volume?
The print area is 220 x 220 x 250 mm, and the machine measures 355 x 355 x 480 mm.
What should I check when it arrives?
Inspect the unit for shipping damage, confirm the touchscreen and extruder work, and run a small test print to verify bed adhesion and extrusion.

Overview

The Refurbished Creality K1C is a K1-series FDM 3D printer that has been fully inspected and professionally repaired before sale. The original extrusion issue, caused by a slipping gear, has been resolved, and the unit was tested afterwards with no operational issues reported. It is described as being in excellent, like-new condition with minimal use of around five hours for testing and no visible damage or wear.

With a 220 x 220 x 250 mm build volume, the K1C gives you room for substantial models and multi-part assemblies. It combines a dual-gear direct drive extruder, a 0.4 mm nozzle rated to 300 °C, and a heated bed reaching 100 °C, making it suitable for both simple and demanding materials.

Key Features

  • Fast printing: rated at 600 mm/s with acceleration up to 20000 g for quicker turnaround on prototypes and parts.
  • Dual-gear direct drive extruder: feeds 1.75 mm filament directly for more consistent extrusion.
  • Wide material range: supports PLA, ABS, PETG, TPU, PA, PC, ASA, PET, PLA-CF, PET-CF and PA-CF.
  • Flexible layer heights: from 0.1 mm for fine detail up to 0.35 mm for faster drafts.
  • Simple controls: a 4.3-inch colour touchscreen for adjusting print parameters.
  • Convenient file transfer: load jobs via USB drive or WiFi.

Specifications Explained

The 220 x 220 x 250 mm build area is the space available for each print, so taller and wider models can be produced without splitting them into sections. The 600 mm/s figure describes the printer's rated printing speed, while acceleration up to 20000 g indicates how quickly it can reach that speed on short moves.

Layer height of 0.1–0.35 mm lets you trade detail against print time: finer layers suit small, intricate parts, while thicker layers speed up larger functional prints. The 0.4 mm nozzle is a versatile middle ground for general work, and the 300 °C nozzle and 100 °C bed temperatures open the door to engineering filaments such as PA, PC and ASA alongside standard PLA and PETG.

The dual-gear direct drive extruder pulls and pushes filament close to the hotend, which helps with flexible materials like TPU and with composite filaments. The machine itself measures 355 x 355 x 480 mm and has a 350 W power rating.

Compatibility and Requirements

The K1C accepts 1.75 mm filament and a 0.4 mm nozzle. It works with Creality Print and Cura 5.0 or later, and accepts STL, OBJ and 3MF files. Jobs can be transferred by USB drive or WiFi. A computer running compatible slicing software is needed to prepare models.

Typical Uses

This printer suits hobbyists and makers producing prototypes, functional parts, mechanical components and detailed display models. The heated bed and high nozzle temperature make it a practical choice for users who want to experiment with engineering-grade and carbon-fibre filaments.

What to Expect from a Refurbished Unit

Each unit is inspected, repaired where needed and tested before dispatch. The printer is reported to be in like-new condition with only about five hours of testing use, so it should perform like a new machine while costing less.

Quick specs

Model Series
K1 Series
Print Size (L x W x H) (mm)
220 x 220 x 250
Machine Size (mm)
355 x 355 x 480
Printing Speed
600
Model No. / Name
K1C
Technology
FDM
See all specifications