Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Cyclone 35A 2-5S BLHeli_S DSHOT600 OPTO ESC is a compact, high-performance speed controller for FPV drones. It offers 25A continuous and 35A burst current, supports DSHOT600, and runs BLHeli_S firmware for smooth, precise throttle response.

Key Highlights

  • 2-5S LiPo input (7.4-16.8V) for versatile setups
  • 25A continuous and 35A burst current handling
  • BLHeli_S firmware with DSHOT600, Oneshot, and Multishot support
  • OPTO design reduces noise and weight
  • Programmable PWM frequency up to 48KHz
  • Compact PCB with efficient heat dissipation

Ideal For

  • FPV racing pilots building lightweight quads
  • Freestyle drone enthusiasts seeking smooth throttle response
  • Multirotor builders using 2-5S batteries
  • Pilots who prefer OPTO setups for reduced noise
  • DIY drone hobbyists looking for compact ESCs

Buying Tip

Check that your flight controller supports DSHOT600 or the protocol you plan to use, and remember to account for a separate BEC since this is an OPTO ESC.

Elecvora expert review

Our verdict

The Cyclone 35A ESC offers a solid balance of performance and value for FPV pilots. Its BLHeli_S firmware and DSHOT600 support provide smooth control, while the OPTO design keeps noise low.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports 2-5S batteries for flexibility
  • High current handling for its size
  • Smooth and responsive throttle
  • Lightweight and compact

Cons

  • Requires separate BEC for flight controller power
  • Needs soldering for installation
  • Limited to 35A burst, so check motor/prop combo

Best for

FPV racing and freestyle pilots with 2-5S setups

Not ideal for

Builders needing an integrated BEC or higher current handling

Specifications

Item TypeElectronic Speed Controller
PWM Frequency Range (KHz)48
Continuous Discharge Current (A)25
Burst Current (A)35
Shipping Weight0.09 kg
Shipping Dimensions13 × 9 × 2 cm

What's in the box

  • 1 x Cyclone 35A 2-5S BLHeli_S Brushless ESC

Frequently Asked Questions

What protocols does this ESC support?
It supports DSHOT600, Oneshot, and Multishot digital protocols, as well as standard PWM.
Does this ESC have a built-in BEC?
No, it is an OPTO ESC without a BEC, so you need a separate power source for your flight controller and receiver.
What battery voltage can I use?
It supports 2-5S LiPo batteries, ranging from 7.4V to 16.8V.
What is included in the package?
The package includes one Cyclone 35A 2-5S BLHeli_S Brushless ESC.
Can I change the PWM frequency?
Yes, the PWM frequency is programmable up to 48KHz using BLHeli_S configuration software.
How do I cool the ESC?
The ESC features a compact PCB with heat dissipation design. Ensure proper airflow in your build and avoid exceeding current limits.

Overview

The Cyclone 35A 2-5S BLHeli_S DSHOT600 OPTO Brushless ESC is engineered for FPV racing and freestyle pilots who demand fast, reliable motor control. It combines a compact footprint with robust power handling, making it suitable for a wide range of multirotor builds. The OPTO design means there is no integrated BEC, which helps reduce electrical interference and keeps the ESC lightweight.

Key Features

  • 2-5S LiPo compatibility: Works with 7.4V to 16.8V battery setups.
  • High current capacity: 25A continuous and 35A burst for demanding maneuvers.
  • BLHeli_S firmware: Delivers smooth, responsive throttle control.
  • Digital protocol support: Compatible with DSHOT600, Oneshot, and Multishot.
  • Programmable PWM: Adjustable frequency up to 48KHz for fine-tuning.
  • Active braking and auto-timing: Enhances efficiency and reliability.
  • Compact and lightweight: Easy to install in tight frames.

Specifications Explained

Continuous current (25A): This is the maximum current the ESC can handle continuously without overheating. It suits typical 5-inch freestyle and racing quads with moderate power demands.

Burst current (35A): Short bursts of up to 35A are allowed for brief periods, such as rapid throttle punches. This provides headroom for aggressive flying without exceeding safe limits.

Input voltage (2-5S): Supports 2 to 5 LiPo cells, giving flexibility across different battery configurations. Always ensure your motor and propeller combination stays within the current limits.

PWM frequency (48KHz): A higher PWM frequency can lead to smoother motor operation and reduced noise. The programmable range allows you to optimize for your specific setup.

OPTO design: No built-in BEC means the ESC does not supply power to your flight controller or receiver. This reduces noise and weight but requires a separate power source for those components.

Compatibility and Requirements

The ESC is compatible with BLHeli_S firmware and supports DSHOT600, Oneshot, and Multishot protocols. It requires a flight controller that can output these signals. Because it is an OPTO ESC, you must provide a separate 5V power source for your flight controller and receiver. Ensure your battery voltage stays within the 2-5S range (7.4-16.8V).

Typical Uses

This ESC is ideal for FPV racing drones, freestyle quads, and other multirotor applications where weight and performance are critical. It works well in 3-inch to 5-inch builds depending on motor selection and current draw.

What's in the Box

  • 1 x Cyclone 35A 2-5S BLHeli_S Brushless ESC

Quick specs

Item Type
Electronic Speed Controller
PWM Frequency Range (KHz)
48
Continuous Discharge Current (A)
25
Burst Current (A)
35
Shipping Weight
0.09 kg
Shipping Dimensions
13 × 9 × 2 cm
See all specifications