
1 / 5 · Click to enlarge
AI Summary
This female DB25 adapter breaks out all 25 signal lines to a labeled screw terminal block with nut. It accepts 24-12AWG wire up to 10A, making communication debugging and custom wiring straightforward.
Key Highlights
- Female DB25 connector with all 25 signal lines brought out
- Screw terminal block with nut for secure wire connections
- Accepts 24-12AWG wire and handles up to 10A current
- Clear labeling of signal names and numbers on terminals
- 3mm terminal pitch with 2.5mm screw holes for standard screwdriver
- Insulated 3mm-thick pad on the bottom for protection
Ideal For
- Electronics technicians debugging serial communications
- Engineers building custom DB25 test harnesses
- Hobbyists working with RS-232 or parallel port projects
- Industrial maintenance teams repairing DB25-equipped machinery
- Makers creating reusable wiring interfaces
Buying Tip
Remember to use a 2.5mm wide screwdriver for the terminal screws and verify your wire gauge is between 24 and 12AWG.
Elecvora expert review
Our verdict
The DB25-M2 is a practical, no-fuss adapter that makes DB25 signal access easy and repeatable. Its clear labeling and sturdy screw terminals are welcome features for debugging and custom wiring.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- All 25 lines clearly labeled for quick identification
- Screw terminals accept a wide wire range (24-12AWG)
- Insulated pad adds safety against shorts
- Compact size and robust construction
Cons
- Requires a 2.5mm screwdriver, which may not be included
- Maximum current of 10A limits high-power applications
- No strain relief for wires, so handle with care
Best for
Technicians and hobbyists needing a reusable DB25 breakout
Not ideal for
High-current or high-vibration environments without additional securing
Specifications
| Manufacturer | Generic |
|---|---|
| Material | Copper, Metal, Plastic |
| Length (mm) | 87 |
| Width (mm) | 53.5 |
| Weight (g) | 55 |
| Model No. / Name | Other Interface Connector |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x DB25-M2 DB25 to Terminal with Nut adapter
Frequently Asked Questions
What is the DB25-M2 used for?
What wire sizes does the terminal block accept?
What is the maximum current rating?
What type of screwdriver is needed?
Is the connector male or female?
Does it come with any wires or accessories?
Overview
The DB25-M2 is a female DB25 to terminal block adapter designed for communication debugging and custom wiring projects. It brings all 25 signal lines out to a screw terminal block, with each terminal clearly labeled by signal name and number. This makes it simple to identify and connect individual wires without soldering or special tools. The adapter is built with copper terminals, a metal shell, and plastic housing, and it includes a nut for secure mounting. An insulated 3mm-thick pad on the bottom helps prevent short circuits. Whether you are troubleshooting serial equipment or building a test harness, this adapter provides a reliable interface between a DB25 connector and bare wires.
Key Features
- All 25 signal lines accessible: Every pin of the DB25 connector is routed to a labeled terminal, so you can tap into any signal.
- Screw terminal with nut: The terminal block uses screws and a nut to secure wires, allowing repeated connect and disconnect cycles.
- Wide wire range: Terminals accept 24-12AWG wire, covering most hookup wire sizes used in prototyping and repair.
- 10A current rating: Suitable for signal and low-power applications up to 10A maximum.
- Clear labeling: Signal names and numbers are printed clearly for quick identification.
- Insulated base pad: A 3mm-thick pad on the bottom insulates the terminals from conductive surfaces.
Specifications Explained
The DB25-M2 measures 87mm in length and 53.5mm in width, with a weight of 55g. The terminal spacing is 3mm, and the screw holes have a diameter of 2.5mm, which means you will need a 2.5mm wide screwdriver for assembly. The terminals are made of environmentally friendly copper for good conductivity, and the housing combines metal and plastic for durability. The maximum current of 10A applies to the terminal connections, so ensure your application stays within this limit. The insulated pad is 3mm thick and helps protect against accidental shorts when the adapter is placed on a conductive surface.
Compatibility and Requirements
This adapter features a female DB25 connector, so it mates with a male DB25 port or cable. The screw terminals accept wire sizes from 24AWG to 12AWG. A 2.5mm wide screwdriver is required for tightening the terminal screws. No additional power source is needed; the adapter is passive and simply passes signals through. It is intended for communication debugging and custom wiring where a DB25 interface needs to connect to discrete wires.
Typical Uses
- Communication debugging between DB25 equipment and terminal blocks
- Creating custom serial or parallel cable adapters
- Test fixtures and breadboard prototyping with DB25 signals
- Industrial control wiring where DB25 connectors are used
- Educational projects demonstrating signal routing
What's in the Box
1 x DB25-M2 DB25 to Terminal with Nut adapter.
Quick specs
- Manufacturer
- Generic
- Material
- Copper, Metal, Plastic
- Length (mm)
- 87
- Width (mm)
- 53.5
- Weight (g)
- 55
- Model No. / Name
- Other Interface Connector













