Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 9-pin female D-sub connector with solder cup terminals for wiring your own serial cables. Gold-plated pins and a 250VAC 5A rating make it a dependable spare for repairs and custom builds.

Key Highlights

  • 9-pin female D-sub socket with solder cup terminals
  • Rated 250VAC at 5A for signal and low-power wiring
  • Gold-plated pins and nickel-plated terminals
  • 1000 MOhm insulation resistance, 20 mOhm contact resistance
  • Compact 30 x 12 mm body at about 3 g each
  • Operates from -55°C to 125°C

Ideal For

  • Electronics hobbyists building custom serial cables
  • Technicians repairing legacy serial equipment
  • Industrial engineers wiring encoders
  • Makers maintaining test-bench and lab gear
  • Workshops keeping spare D-sub connectors on hand

Buying Tip

Check that your mating plug is male DB9 and confirm your cable's wire count and pinout before soldering, since this connector has no backshell or mounting hardware included.

Elecvora expert review

Our verdict

A straightforward, well-plated solder cup connector that does exactly what a DB9 female socket should. It is a sensible spare for anyone who repairs serial wiring rather than buying moulded cables.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Gold-plated pins and nickel-plated terminals
  • Solder cup design suits custom cable lengths
  • Wide -55°C to 125°C operating range
  • Compact and light at about 3 g

Cons

  • Requires soldering skill and tools
  • No backshell or mounting hardware included

Best for

Custom serial cable builds and legacy equipment repairs

Not ideal for

Plug-and-play users who want a finished cable

Specifications

ManufacturerGeneric
Model No. / NameDB 9
GenderFemale
Voltage Rating (V)250VAC
Current Rating (A)5
Insulation Resistance (MOhm)1000
Contact Resistance (ohm)20mOhm
Operating Temperature (°C)-55 to 125
MaterialPlastic, Metal
Length (mm)30
Width (mm)12
Weight (g)3 (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x DB9 Female Welded Connector

Frequently Asked Questions

Does this connector mate with a male DB9 plug?
Yes, it is a female DB9 socket and accepts a standard male DB9 plug.
What voltage and current can it handle?
It is rated for 250VAC and 5A, which is ample for serial signal wiring and low-power connections.
Do I need to solder the wires?
Yes. The connector uses solder cup terminals, so each wire must be soldered into its cup.
What is included in the package?
The package contains one DB9 female welded connector. No backshell, screws or cable are included.
What temperature range does it support?
It is rated for operation between -55°C and 125°C.
How should I care for the connector?
Keep the contacts clean and dry, avoid bending soldered wires sharply at the cup, and store spare connectors in a dry place.

Overview

The Generic DB9 Female Welded Connector is a 9-pin D-sub socket designed for solder cup wiring. Instead of crimping, you strip and tin each wire, then solder it into the cup behind the corresponding contact. That makes this connector a practical choice for custom cable lengths, field repairs and prototypes where an off-the-shelf cable will not do.

The female contact layout accepts a standard mating male DB9 plug. The body combines plastic and metal, measures roughly 30 mm by 12 mm and weighs about 3 g, so it adds very little bulk to a cable end.

Key Features

  • Solder cup terminals: each of the nine contacts has its own cup for direct wire soldering.
  • Gold-plated pins: help maintain a clean contact surface over repeated mating cycles.
  • Nickel-plated terminals: provide a durable base for soldered joints.
  • Electrical headroom: rated 250VAC at 5A, with 1000 MOhm insulation resistance and 20 mOhm contact resistance.
  • Wide temperature range: rated for operation from -55°C to 125°C.

Specifications Explained

The 250VAC and 5A ratings describe the maximum voltage and current the connector is intended to carry. For typical serial signal lines the actual load is far lower, so the rating mainly tells you the part is built for low-power wiring rather than high-current power distribution.

Insulation resistance of 1000 MOhm indicates how well the body isolates adjacent contacts, while 20 mOhm contact resistance is the resistance across a mated pin pair. Lower contact resistance means less signal loss, which matters for reliable data links.

The -55°C to 125°C operating range covers indoor equipment, outdoor enclosures and most workshop environments. Gold plating on the pins and nickel plating on the terminals are both chosen for corrosion resistance and solderability.

Compatibility and Requirements

This is a female DB9 connector, so it mates with a male DB9 plug. Wiring it requires a soldering iron, solder, wire strippers and a suitable cable. The solder cup design is intended for individual conductors rather than pre-assembled ribbon or moulded cables. No mounting hardware or backshell is included in the listed package.

Typical Uses

  • Repairing or extending serial cables for legacy equipment
  • Building custom DB9 cable assemblies for data connectivity
  • Wiring linear and rotary encoders in industrial setups
  • Hobby electronics and test-bench projects needing a 9-pin serial link
  • Keeping a spare connector in the workshop for quick replacements

What's in the Box

One DB9 Female Welded Connector.

Quick specs

Manufacturer
Generic
Model No. / Name
DB 9
Gender
Female
Voltage Rating (V)
250VAC
Current Rating (A)
5
Insulation Resistance (MOhm)
1000
See all specifications