
1 / 5 · Click to enlarge
AI Summary
A compact 12V DC electromagnet that holds up to 15kg and releases when power is cut. Its 30mm x 25mm mild steel body and 28cm cable make it easy to fit into small automation and robotics projects.
Key Highlights
- 15kg rated holding force from a 30mm diameter body
- 12VDC operation at 0.3A and 3W power draw
- Mild steel construction with M4 bolt mounting
- 28cm cable for flexible wiring in tight spaces
- Operates from -20°C to 120°C
- Weighs only 98g for lightweight builds
Ideal For
- Robotics hobbyists building pick-and-place mechanisms
- DIY automation projects needing controllable holding force
- Makers creating magnetic locks or sorting systems
- Engineering students demonstrating electromagnetism
- Small-scale assembly tasks with ferrous parts
Buying Tip
Confirm your power supply can deliver 12VDC at 0.3A and that the object to be lifted is flat, clean, and at least 5mm thick for rated holding force.
Elecvora expert review
Our verdict
A practical, low-cost electromagnet for light-duty holding and lifting tasks where compact size and low power draw matter. It performs best on clean, flat ferrous surfaces and is easy to integrate into small projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact and lightweight design
- Low current draw at 0.3A
- Wide operating temperature range
- Simple two-wire connection
- M4 mounting thread for secure installation
Cons
- Holding force depends heavily on surface conditions
- No power supply or switch included
- Not suitable for continuous lifting of heavy loads
Best for
DIY robotics and automation projects needing controlled magnetic holding
Not ideal for
Industrial lifting of heavy or irregular ferrous loads
Specifications
| Item Type | Lifting Electromagnet |
|---|---|
| Electromagnet Force (Kg) | 15 |
| Voltage Rating (V) | 12VDC |
| Current Rating (A) | 0.3 |
| Model No. / Name | DC 12V KK-P30/25 |
| Holding/ Suction Force (KG) | 15 |
| Operating Voltage (VDC) | 12 |
| Max. Operating Current (A) | 300 |
| Power Consumption (W) | 3 |
| Operating Temperature (°C) | -20 to 120 |
| Cable Length | 28 |
| Bolt Size | M4 |
| Body Material | Mild Steel |
| Dimensions (L x W x H) mm | 30 x 25 (Dia. x Length) |
| Weight (g) | 98 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 8 × 5 × 4 cm |
Frequently Asked Questions
What voltage does this electromagnet require?
How much weight can it hold?
Does it come with a power supply or switch?
Can it be used continuously?
What type of objects can it lift?
How do I mount it?
Overview
The DC 12V KK-P30/25 is a lifting solenoid electromagnet designed to attract magnetic materials when energised and release them when power is removed. With a 30mm diameter and 25mm length, it fits into compact assemblies while delivering a rated holding force of 15kg on suitable ferrous surfaces. The mild steel body and M4 bolt mounting give it a sturdy, mountable form factor for DIY and light industrial projects.
Key Features
- 15kg holding force: Sufficient for lifting and holding small ferrous parts and tools.
- 12VDC, 0.3A, 3W: Low current draw makes it compatible with common 12V power supplies.
- Compact size: 30mm diameter x 25mm length and 98g weight suit space-constrained builds.
- 28cm cable: Provides reach for wiring without immediate soldering.
- Wide temperature range: Rated for -20°C to 120°C operating conditions.
- M4 bolt mounting: Allows secure fixing to brackets and frames.
Specifications Explained
The 15kg holding force is a maximum rating achieved under ideal conditions: a flat, clean, ferrous object that fully covers the magnet face and is at least 5mm thick. Thinner or rough materials will reduce suction. The 12VDC rating means it should be powered from a regulated 12V source; the 0.3A current draw and 3W consumption indicate modest power needs. The 30mm x 25mm dimensions refer to diameter and length, so check clearance around the mounting point. The 28cm cable gives you some flexibility before connecting to your circuit. The M4 bolt size refers to the mounting thread, so you can secure it with an M4 fastener.
Compatibility and Requirements
This electromagnet requires a 12VDC power source capable of supplying at least 0.3A. It does not include a power supply, switch, or mounting hardware. The object to be lifted must be ferromagnetic, flat, clean, and thick enough (at least 5mm recommended) to achieve strong holding force. Ensure the object's surface area is equal to or greater than the magnet face for maximum performance.
Typical Uses
Common applications include pick-and-place mechanisms in small robotics, automated sorting of ferrous parts, magnetic door locks, and DIY holding fixtures. It is also used in educational projects to demonstrate electromagnetic principles. Because it releases when de-energised, it suits tasks where parts need to be gripped and released repeatedly.
What's in the Box
Package contents are not specified by the manufacturer. Please check the product listing for any included accessories.
Quick specs
- Item Type
- Lifting Electromagnet
- Electromagnet Force (Kg)
- 15
- Voltage Rating (V)
- 12VDC
- Current Rating (A)
- 0.3
- Model No. / Name
- DC 12V KK-P30/25
- Holding/ Suction Force (KG)
- 15














