
1 / 3 · Click to enlarge
AI Summary
A compact 12 VDC lifting electromagnet with a 35 kg holding force rating, 0.34 A current draw and a 40 x 25 mm mild-steel body. It produces magnetic force only while powered, making it useful for controlled pick-and-release tasks.
Key Highlights
- 35 kg holding force rating on suitable flat ferrous surfaces
- 12 VDC operation with 0.34 A maximum current draw
- Compact 40 mm diameter by 25 mm long mild-steel body
- 28 cm cable and M5 bolt for simple mounting
- Works from -20 to 120 degrees Celsius
- Magnetic action stops when power is removed
Ideal For
- Makers building small automated pick-and-place fixtures
- DIY robotics enthusiasts needing a switchable magnet
- Workshop users holding ferrous parts during assembly
- Educators demonstrating electromagnetic principles
- Technicians designing simple sorting or latching mechanisms
Buying Tip
Check that your workpiece is flat, clean, ferrous and at least 5 mm thick before expecting anywhere near the 35 kg holding force.
Elecvora expert review
Our verdict
A small, low-power electromagnet that is easy to mount and control, with a useful 35 kg holding-force rating when used on suitable ferrous surfaces. It is a sensible choice for light-duty automation and DIY projects where switchable magnetism is needed.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 40 x 25 mm body fits tight spaces
- Low 0.34 A current draw at 12 VDC
- M5 bolt and 28 cm cable simplify installation
- Magnetic force is controllable via power
Cons
- Holding force depends heavily on workpiece flatness and thickness
- No power supply or controller included
- Not a permanent magnet, so it releases when de-energized
Best for
DIY automation and light-duty holding tasks
Not ideal for
Lifting rough, thin or non-ferrous objects
Specifications
| Item Type | Lifting Electromagnet |
|---|---|
| Electromagnet Force (Kg) | 35 |
| Voltage Rating (V) | 12VDC |
| Current Rating (A) | 0.34 |
| Model No. / Name | 12V KK-P40/25 |
| Holding/ Suction Force (KG) | 35 |
| Operating Voltage (VDC) | 12 |
| Max. Operating Current (A) | 0.34 |
| Power Consumption (W) | 4 |
| Operating Temperature (°C) | -20 to 120 |
| Cable Length | 28 |
| Bolt Size | M5 |
| Body Material | Mild Steel |
| Dimensions (L x W x H) mm | 40 x 25 (Dia x Length) |
| Weight (g) | 193 |
| Shipping Weight | 0.22 kg |
| Shipping Dimensions | 10 × 6 × 5 cm |
Frequently Asked Questions
What voltage does this electromagnet require?
Will it hold 35 kg on any metal object?
Does it stay magnetic when power is removed?
What is included in the package?
How do I mount it?
What is the operating temperature range?
Overview
The DC 12V KK-P40/25 is a lifting solenoid electromagnet intended for tasks where magnetism must be switched on and off electrically. Inside the mild-steel housing, a coil generates a magnetic field whenever 12 VDC is applied, and the field collapses when the supply is cut. With a rated holding force of 35 kg and a maximum current of 0.34 A, it offers a useful balance between compact size and pulling capability. The 40 mm diameter, 25 mm long body, 28 cm cable and M5 bolt make it straightforward to integrate into small fixtures, brackets and experimental rigs.
Key Features
- Rated 35 kg holding force for lifting and holding ferrous parts when the contact conditions are right.
- 12 VDC, 0.34 A maximum and approximately 4 W power consumption for low-current operation.
- Compact dimensions of 40 mm diameter by 25 mm length and a 193 g body weight.
- 28 cm cable gives some flexibility when routing to a power source or switch.
- M5 bolt provides a defined mounting point for brackets and plates.
- Operating range of -20 to 120 degrees Celsius for use in varied workshop environments.
Specifications Explained
The 35 kg figure is a holding-force rating, not a guaranteed lift for every object. It assumes a flat, clean, ferrous workpiece that fully covers the magnet face and is thick enough to carry the magnetic flux. Thinner or rougher objects, or gaps between magnet and workpiece, will reduce the achievable force. The 12 VDC rating means the coil is designed for a nominal 12 V supply, and the 0.34 A maximum current corresponds to roughly 4 W, so a small power supply or battery can drive it. The 40 x 25 mm size refers to diameter and length, while the 193 g weight and 28 cm cable help with installation planning. The mild-steel body is the magnetic circuit material, and the M5 bolt is the mounting thread.
Compatibility and Requirements
This electromagnet requires a 12 VDC power source capable of supplying at least 0.34 A. It is not a permanent magnet and will not hold a load once power is removed. To achieve the rated holding force, the object being held should be ferrous, flat, clean, at least 5 mm thick and large enough to cover the magnet face. The supplied 28 cm cable must be connected to a suitable switch or relay if on/off control is needed. No controller or power supply is included.
Typical Uses
Common applications include pick-and-place fixtures, small automated sorting mechanisms, magnetic latches, door or gate holding, workshop jigs, educational demonstrations and DIY robotics projects. It can also be used to hold ferrous parts during assembly or to release them on command. Because the field is electrically controlled, it suits sequences where a permanent magnet would be inconvenient.
What's in the Box
Package contents are not specified by the manufacturer. Please confirm the included items with the listing before ordering.
Quick specs
- Item Type
- Lifting Electromagnet
- Electromagnet Force (Kg)
- 35
- Voltage Rating (V)
- 12VDC
- Current Rating (A)
- 0.34
- Model No. / Name
- 12V KK-P40/25
- Holding/ Suction Force (KG)
- 35














