
1 / 3 · Click to enlarge
AI Summary
A 24VDC lifting electromagnet with 30KG holding force in a compact 40 x 20 mm mild steel body. It grips only while powered, making it easy to control in automated and DIY pick-and-place setups.
Key Highlights
- 30KG holding force from a 40 x 20 mm mild steel body
- 24VDC operation at 0.34A and 7.5W power draw
- Magnetic pull releases when power is removed
- 30 cm cable and M5 bolt for simple mounting
- Rated for operating temperatures from -25 to 105 degrees C
- Weighs only 140 g for low-load mechanical designs
Ideal For
- Automation engineers building small pick-and-place grippers
- Makers and hobbyists adding a switchable magnet to a robot
- Workshop technicians needing a compact holding fixture
- Maintenance teams building sorting or release mechanisms
- Students exploring electromagnet and solenoid behaviour
Buying Tip
Check that your target part is ferrous, flat and at least as large as the 40 x 20 mm magnet face, since the 30KG rating assumes full contact on clean iron-based material.
Elecvora expert review
Our verdict
A neat, low-power 24VDC electromagnet that offers a practical 30KG hold in a very small package. It is best treated as a controlled gripper element rather than a heavy-duty lifting magnet, and results depend heavily on surface contact.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 40 x 20 mm body suits tight mechanisms
- Low 7.5W draw at 24VDC
- Releases the load when power is removed
- Simple M5 bolt mounting and 30 cm lead
Cons
- Rated force depends on flat, clean, thick ferrous targets
- No mounting hardware or connectors confirmed in the box
- Requires an external 24VDC supply and switching device
Best for
Small automated grippers, fixtures and switchable magnetic holds
Not ideal for
Lifting rough, thin or non-ferrous loads at the full rated force
Specifications
| Item Type | Lifting Electromagnet |
|---|---|
| Electromagnet Force (Kg) | 30 |
| Voltage Rating (V) | 24VDC |
| Current Rating (A) | 0.34 |
| Holding/ Suction Force (KG) | 30 |
| Operating Voltage (VDC) | 24 |
| Max. Operating Current (A) | 340 |
| Power Consumption (W) | 7.5 |
| Operating Temperature (°C) | -25 to 105 |
| Cable Length | 30 |
| Bolt Size | M5 |
| Body Material | Mild Steel |
| Dimensions (L x W x H) mm | 40 x 20 |
| Weight (g) | 140 |
| Shipping Weight | 0.15 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
Frequently Asked Questions
Does the magnet stay on without power?
What power supply does it need?
Why does it not hold 30KG on every object?
Can I connect it directly to a microcontroller?
What is included in the package?
How should I mount and maintain it?
Overview
The DC 24V P40/20 lifting solenoid electromagnet is a compact magnetic actuator built around an iron core and coil. When 24VDC is applied, the coil creates a magnetic field that attracts ferrous objects; when the supply is removed, the field collapses and the load is released. That on-demand behaviour separates it from permanent magnets and makes it useful wherever a grip needs to be switched on and off electronically.
With a 30KG holding force, a 0.34A current rating and 7.5W consumption, the unit balances useful pulling power with modest electrical demand. The mild steel body measures 40 x 20 mm and weighs 140 g, so it can be mounted on small mechanisms without adding significant load.
Key Features
- 30KG holding force for lifting, holding and gripping ferrous parts
- 24VDC coil drawing 0.34A at 7.5W
- Compact 40 x 20 mm mild steel body weighing 140 g
- 30 cm cable for routing to a power supply or control relay
- M5 bolt mounting for secure fixing to brackets and fixtures
- Wide operating range of -25 to 105 degrees C
Specifications Explained
Electrical ratings
The coil is rated for 24VDC and draws 0.34A, which corresponds to 7.5W of power consumption. Matching your supply to the rated voltage is important: the published 30KG holding force is specified at the rated voltage, and a lower supply will reduce the magnetic pull.
Holding force
The 30KG figure is a maximum suction value. It assumes a flat, clean, ferrous surface that fully covers the magnet face and is thick enough to carry the flux. Thinner, rougher or smaller targets will reduce the achievable hold.
Size and mounting
At 40 x 20 mm and 140 g, the magnet fits into compact gripper heads and small fixtures. The M5 bolt fixing provides a mechanical attachment point, while the 30 cm cable gives a short lead for connecting to terminals or a junction box.
Thermal range
The -25 to 105 degrees C operating temperature range covers typical indoor industrial and workshop environments. Keep the coil within this window and avoid enclosing it where heat cannot escape.
Compatibility and Requirements
A regulated 24VDC supply capable of at least 0.34A is required. Because the magnet is a coil, it is good practice to switch it with a relay or driver suited to inductive loads rather than wiring it directly to a sensitive controller output. The target object must be ferrous, flat, clean and large enough to cover the magnet face for the rated force to be approached.
Typical Uses
- Pick-and-place grippers on small automated machines
- Holding fixtures and jigs during assembly or machining
- Sorting and separating ferrous parts
- Latch, release and locking mechanisms
- Robotics, coursework and hobby projects needing a switchable magnet
What's in the Box
Package contents are not specified by the manufacturer. Confirm the included items with the listing before ordering if you need mounting hardware or connectors.
Quick specs
- Item Type
- Lifting Electromagnet
- Electromagnet Force (Kg)
- 30
- Voltage Rating (V)
- 24VDC
- Current Rating (A)
- 0.34
- Holding/ Suction Force (KG)
- 30
- Operating Voltage (VDC)
- 24














