
1 / 5 · Click to enlarge
AI Summary
This 80x80x25mm DC12V cooling fan features double ball bearings and a 30cm cable with XH2.54-2P connector. It provides reliable active cooling for Raspberry Pi, motor drivers, and PC CPU boxes.
Key Highlights
- Double ball bearing design for extended lifespan
- 80x80x25mm standard frame with 7mm mounting holes
- 12V DC operation, max current 0.25A
- 30cm cable with XH2.54-2P connector for easy hookup
- Black plastic and metal construction
- Compact and lightweight at only 0.02kg shipping weight
Ideal For
- Raspberry Pi enthusiasts needing reliable cooling
- Electronics hobbyists building custom projects
- PC builders replacing a noisy or failed 80mm fan
- Makers using high-current motor drivers
- 3D printer owners upgrading electronics cooling
Buying Tip
Check that your power source provides 12V and that the XH2.54-2P connector matches your board's fan header; if not, you may need an adapter or to splice the wires.
Elecvora expert review
Our verdict
This 80mm double ball bearing fan offers a practical cooling solution for 12V electronics, with a convenient connector and adequate cable length. Its durable bearing type makes it a smart choice for continuous-duty applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Double ball bearings enhance longevity
- Standard 80mm size fits many mounts
- Pre-attached XH2.54-2P connector saves time
- Lightweight and compact
Cons
- No mounting screws included
- May be noisy at full 12V
- Not a PWM fan, so speed control requires voltage adjustment
Best for
Electronics projects needing a reliable 12V 80mm fan with a common connector
Not ideal for
Applications requiring PWM speed control or ultra-quiet operation
Specifications
| Item Type | Double Ball Cooling Fan |
|---|---|
| Dimensions (L x W x H) mm | 80x25 |
| Rated Voltage (VDC) | 12 |
| Color | Black |
| Material | Plastic, Metal |
| Mounting Hole Diameter (mm) | 7 |
| Cable Length | 300 |
| Max. Operating Current (A) | 100 |
| Connector Type | XH2.54-2P |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 11 × 8 × 3 cm |
What's in the box
- 1 x 8025 12V Cooling Fan
Frequently Asked Questions
What is the voltage and current rating of this fan?
Can I connect this fan directly to a Raspberry Pi?
What is the cable length and connector type?
Are mounting screws included?
Is this fan suitable for continuous operation?
What are the dimensions of the fan?
Overview
The Generic DC12V 0.25A 8025 Double Ball Cooling Fan is a compact 80x80x25mm axial fan designed for active cooling in electronics projects and equipment. It operates from a 12V DC supply and draws a maximum current of 0.25A. The fan uses dual ball bearings, which are known for their durability and ability to handle continuous operation better than sleeve bearings. A 30cm cable with an XH2.54-2P connector is pre-attached, allowing quick connection to compatible headers or easy adaptation to other wiring. The fan frame is made of black plastic with metal internal components, and it features 7mm mounting holes for secure installation.
Key Features
- Double ball bearings: Provide smooth rotation and longer service life, especially in applications where the fan runs constantly.
- Standard 80mm size: The 80x80x25mm dimensions fit many common mounting patterns and enclosures.
- 12V DC operation: Works with a wide range of power supplies and control boards that provide 12V.
- XH2.54-2P connector: A common 2-pin connector that mates with many hobbyist and industrial boards.
- 30cm cable: Offers flexibility in positioning the fan relative to the power source.
- Lightweight: At only 0.02kg shipping weight, it adds minimal load to your setup.
Specifications Explained
Dimensions (L x W x H): 80x80x25mm. This is a standard 80mm fan size, so it can replace similar fans in many devices. The 25mm thickness is common for 80mm fans, providing a good balance between airflow and space requirements.
Rated Voltage: 12V DC. Ensure your power source provides a stable 12V output. The fan may run at lower voltages but will spin slower and move less air.
Max. Operating Current: 0.25A (250mA). This means the fan will draw up to a quarter of an amp at 12V, so your power supply or controller should be able to supply at least that much current on the fan output.
Connector Type: XH2.54-2P. This is a 2-pin connector with 2.54mm pitch. It is commonly used on Raspberry Pi and other development boards for fan connections. Check the pinout of your board to ensure correct polarity.
Cable Length: 300mm (30cm). This gives you enough length to route the cable inside a typical enclosure without excess slack.
Mounting Hole Diameter: 7mm. Use M4 or similar screws (not included) to mount the fan. The hole diameter is large enough for common fan screws.
Material: Plastic frame with metal bearings. The black plastic frame is durable and non-conductive, while the metal components provide structural integrity.
Compatibility and Requirements
This fan requires a 12V DC power source capable of supplying at least 0.25A. The XH2.54-2P connector is compatible with many development boards and controllers that have a matching 2-pin header. For example, it can be connected to Raspberry Pi pins 4 and 6 (5V and GND) for 5V operation, but note that at 5V the fan will run slower and may not provide sufficient cooling for high-load applications. For full performance, use a 12V supply. Always verify the pinout of your board before connecting to avoid reverse polarity. The fan does not include mounting screws or a fan guard; these must be sourced separately if needed.
Typical Uses
- Cooling Raspberry Pi and other single-board computers in enclosed cases.
- Active cooling for high-current motor driver boards.
- PC CPU box ventilation and replacement of faulty fans.
- 3D printer electronics cooling (e.g., stepper drivers, power supplies).
- General electronics projects requiring reliable 12V cooling.
- DIY enclosures for audio amplifiers, power supplies, and network equipment.
What's in the Box
1 x 8025 12V Cooling Fan. Note: Mounting screws and other accessories are not included unless otherwise specified.
Quick specs
- Item Type
- Double Ball Cooling Fan
- Dimensions (L x W x H) mm
- 80x25
- Rated Voltage (VDC)
- 12
- Color
- Black
- Material
- Plastic, Metal
- Mounting Hole Diameter (mm)
- 7













