
1 / 4 · Click to enlarge
AI Summary
A 40 x 10 mm 12 V PWM fan built specifically for the Compute Module 4 IO Board and CM4-IO-Board-Case-A. Its four-wire header lets the board adjust fan speed automatically, so cooling matches the workload.
Key Highlights
- 40 x 10 mm footprint sized for the CM4 IO Board
- Four-wire PWM header for speed adjustment
- 12 V rated, 0.48 W, approximately 5000 RPM
- 150 mm cable for tidy routing inside a case
- Fits CM4-IO-Board-Case-A enclosure
- Black plastic and metal construction
Ideal For
- Makers building a Compute Module 4 IO Board project
- Users assembling a CM4-IO-Board-Case-A enclosure
- Developers running sustained workloads on CM4 hardware
- Anyone replacing a missing or failed fan on a CM4 IO Board
- Hobbyists who want temperature-based fan speed control
Buying Tip
Confirm your board provides a 12 V rail and a four-wire PWM fan header before ordering, since this fan is not a 5 V part.
Elecvora expert review
Our verdict
A sensible, no-fuss cooling solution for anyone running a Compute Module 4 IO Board, especially in a case where a low-profile fan is required. The PWM interface is the standout feature, letting the board manage speed instead of running the fan at a fixed rate.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Designed specifically for the CM4 IO Board and CM4-IO-Board-Case-A
- Four-wire PWM control allows speed adjustment
- Low 0.48 W power draw
- Compact 40 x 10 mm size
- 150 mm cable for tidy installation
Cons
- Requires a 12 V supply, not 5 V
- Only fits the specified CM4 IO board and case
- Package contents are not documented in the available data
Best for
Compute Module 4 IO Board owners who need reliable active cooling with speed control
Not ideal for
Builders using boards without a matching 12 V four-wire PWM fan header
Specifications
| Item Type | Regular Cooling Fan |
|---|---|
| Dimensions (L x W x H) mm | 40x10 |
| Rated Voltage (VDC) | 12 |
| Rated Speed (RPM) | 5000 |
| Color | Black |
| Material | Plastic, Metal |
| Compatibility | Compute Module 4 IO board, CM4-IO-Board-Case-A |
| RPM Tolerance | ±10% |
| Interface | 4-wire PWM speed-adjustable fan header |
| Power Rating | 0.48W (12V, 0.04±0.02A) |
| Cable Length | 150±10mm |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 11 × 7 × 2 cm |
Frequently Asked Questions
What board is this fan designed for?
What voltage does the fan need?
Does the fan support speed control?
What is the fan size and speed?
How long is the fan cable?
What is included in the package?
Overview
The Waveshare Dedicated Cooling Fan is an active cooling accessory for the Raspberry Pi Compute Module 4 IO Board. It is a 40 x 10 mm fan that mounts to the board and connects through a four-wire PWM header, allowing fan speed to be adjusted rather than fixed. That matters on a CM4 system, where sustained workloads can raise board temperatures and where a fan running at a constant full speed is often louder than necessary.
With a 12 V rating, a 5000 RPM nominal speed and a power draw of 0.48 W, the fan moves air across the board area while staying within a modest current budget. The 150 mm cable provides slack for clean cable management inside a case.
Key Features
- Purpose-built fit: Designed for the Compute Module 4 IO Board and the CM4-IO-Board-Case-A.
- PWM speed control: The four-wire interface lets the board regulate fan speed.
- Compact dimensions: 40 x 10 mm keeps the fan low-profile.
- Efficient operation: 0.48 W at 12 V, rated 0.04 ±0.02 A.
- Practical cable length: 150 ±10 mm for routing inside an enclosure.
Specifications Explained
Size and speed
At 40 x 10 mm, the fan is small enough to sit close to the board without adding much height. The 5000 RPM rating with a ±10% tolerance describes the nominal speed range the fan is built around; actual speed depends on the PWM signal it receives.
Voltage and power
The fan is rated at 12 VDC with a 0.48 W power rating, drawing roughly 0.04 A. Check that your setup supplies the correct 12 V rail before connecting it.
Interface
The four-wire PWM fan header is the key detail: it allows speed adjustment instead of simple on/off operation, so the fan can run slower when the board is cool and faster under load.
Compatibility and Requirements
This fan is intended for the Compute Module 4 IO Board and the CM4-IO-Board-Case-A. It requires a 12 V supply and a four-wire PWM fan header on the host board. It is not a general-purpose case fan for other boards unless those boards provide the same mounting and header arrangement.
Typical Uses
- Cooling a Compute Module 4 IO Board in a development or test setup.
- Adding active airflow inside a CM4-IO-Board-Case-A build.
- Keeping temperatures in check on a CM4 system running sustained tasks.
- Replacing a failed or missing fan on an existing CM4 IO Board installation.
What's in the Box
Package contents are not specified in the available product data.
Quick specs
- Item Type
- Regular Cooling Fan
- Dimensions (L x W x H) mm
- 40x10
- Rated Voltage (VDC)
- 12
- Rated Speed (RPM)
- 5000
- Color
- Black
- Material
- Plastic, Metal



















