Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Waveshare TSL25911 is a high-sensitivity ambient light sensor module with I2C interface, measuring up to 88000 Lux with a wide 600M:1 dynamic range. It works with 3.3V or 5V systems and includes an IR photodiode for accurate readings in challenging light conditions.

Key Highlights

  • Based on TSL25911FN sensor with 600M:1 dynamic range
  • Measures light intensity from 0 to 88000 Lux
  • I2C interface at fixed address 0x29 for easy integration
  • Onboard voltage translator supports 3.3V and 5V logic
  • Infrared-responding photodiode for precise measurements
  • Interrupt output with programmable upper and lower thresholds

Ideal For

  • Electronics hobbyists and makers using Arduino or Raspberry Pi
  • Engineers prototyping light-sensitive automation systems
  • Students learning about I2C sensors and embedded programming
  • DIY smart home enthusiasts building ambient light monitoring
  • Developers needing precise lux measurements in varied lighting

Buying Tip

Check that your project can accommodate the fixed I2C address 0x29 if you plan to use multiple sensors on the same bus.

Elecvora expert review

Our verdict

The Waveshare TSL25911 module delivers accurate ambient light sensing with a wide dynamic range and easy I2C integration. It is a solid choice for makers needing reliable lux measurements in diverse lighting conditions.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High sensitivity and wide dynamic range cover most lighting scenarios
  • Onboard voltage translator simplifies use with 3.3V and 5V systems
  • Infrared compensation improves accuracy in challenging environments
  • Interrupt output reduces microcontroller polling

Cons

  • Fixed I2C address limits multiple sensors on one bus without a multiplexer
  • No onboard pull-up resistors for I2C lines; may be needed depending on the host

Best for

Makers and engineers needing precise ambient light measurement with minimal setup

Not ideal for

Projects requiring multiple light sensors on the same I2C bus without additional hardware

Specifications

Model No. / NameAmbient Light Sensor
Operating Voltage (V)3.3 to 5
SensorTSL25911FN
Communication ModeI2C (constant address: 0x29)
Effective Range0~88000Lux
Dimensional Accuracy (mm)27mm × 20mm
Mounting Hole Diameter (mm)2.0mm
Shipping Weight0.005 kg
Shipping Dimensions2 × 2 × 1 cm

What's in the box

  • 1 x TSL25911 Light Sensor Module
  • 1 x PH2.0 5PIN wire

Frequently Asked Questions

What is the I2C address of this sensor?
The sensor has a fixed I2C address of 0x29. It cannot be changed, so only one sensor can be used per I2C bus unless a multiplexer is added.
Can I use this module with both 3.3V and 5V microcontrollers?
Yes, the onboard voltage translator allows operation with both 3.3V and 5V logic levels. Simply connect VCC to the appropriate supply voltage.
What is the maximum light intensity it can measure?
The effective range is 0 to 88000 Lux, which covers most indoor and outdoor lighting conditions, including bright sunlight.
Does the package include cables?
Yes, a PH2.0 5-pin wire is included for connecting the sensor to your microcontroller or development board.
Is there example code available?
Yes, Waveshare provides development resources and manual with examples for Raspberry Pi, Arduino, and STM32. These are typically available on their wiki.
How should I care for the sensor?
Avoid exposing the sensor to excessive moisture or dust, and handle the module by the edges to prevent damage to the components. Store in a dry environment when not in use.

Overview

The Waveshare TSL25911 Ambient Light Sensor Module is a digital light-to-digital converter built around the TSL25911FN chip. It combines a broadband photodiode (visible plus infrared) and an infrared-responding photodiode on a single CMOS integrated circuit, enabling precise ambient light measurement. The module outputs a digital signal via I2C, which can be read by a microcontroller to calculate illuminance in lux. With a wide dynamic range of 600M:1 and an effective range of 0 to 88000 Lux, it adapts to environments from dim indoor lighting to bright daylight.

Key Features

  • High sensitivity: Detects light levels as low as 188 µLux, suitable for low-light applications.
  • Wide dynamic range: 600M:1 ratio allows operation across vastly different lighting conditions without gain switching.
  • I2C interface: Fixed address 0x29 simplifies wiring and software configuration.
  • Voltage flexibility: Onboard voltage translator makes it compatible with both 3.3V and 5V systems.
  • Infrared compensation: The IR-responding photodiode helps maintain accuracy even under strong infrared noise.
  • Interrupt output: Programmable upper and lower thresholds can trigger interrupts, reducing polling overhead.

Specifications Explained

Operating voltage (3.3 to 5 V): The module can be powered directly from common microcontroller boards without additional level shifting. Sensor (TSL25911FN): This IC integrates two ADCs that convert photodiode currents into digital values for each channel. Effective range (0–88000 Lux): Covers everything from moonlight to direct sunlight, making it versatile for outdoor and indoor use. Communication (I2C, address 0x29): Only two data lines are needed, and the fixed address means no jumpers or configuration. Dimensions (27mm × 20mm): Compact footprint fits into small enclosures. Mounting holes (2.0mm): Allow secure installation with standard M2 screws.

Compatibility and Requirements

The module is designed for use with 3.3V and 5V microcontrollers and comes with development resources and examples for Raspberry Pi, Arduino, and STM32. A PH2.0 5-pin wire is included for quick connection. No additional libraries are required beyond the provided examples. The I2C address is fixed at 0x29, so only one sensor per bus can be used without an multiplexer.

Typical Uses

  • Automatic brightness adjustment for displays and LEDs
  • Ambient light monitoring in smart home systems
  • Daylight detection for outdoor lighting control
  • Educational projects with Arduino or Raspberry Pi
  • Light-based data logging and environmental sensing

What's in the Box

  • 1 x TSL25911 Light Sensor Module
  • 1 x PH2.0 5PIN wire

Quick specs

Model No. / Name
Ambient Light Sensor
Operating Voltage (V)
3.3 to 5
Sensor
TSL25911FN
Communication Mode
I2C (constant address: 0x29)
Effective Range
0~88000Lux
Dimensional Accuracy (mm)
27mm × 20mm
See all specifications