Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Waveshare Tracker Sensor is a 5-channel infrared line tracking module with analog outputs. Its high-sensitivity detectors and anti-jamming design enable stable robot line following when used with PID control.

Key Highlights

  • Five ITR20001/T infrared detectors for multi-channel line detection
  • High sensitivity and anti-jamming for stable performance
  • Analog output on each channel for precise signal reading
  • Wide operating voltage range of 3.3V to 5V
  • Compact and lightweight for easy robot integration
  • Includes XH2.54 7-pin wire for quick connection

Ideal For

  • Robotics students building line-following robots
  • DIY enthusiasts creating automated guided vehicles
  • Competition robot builders needing reliable line detection
  • Educators teaching PID control and sensor integration
  • Makers prototyping with Arduino or Raspberry Pi

Buying Tip

Ensure your microcontroller has at least five analog input pins available before purchasing.

Elecvora expert review

Our verdict

The Waveshare Tracker Sensor is a solid choice for robotics projects that demand reliable line tracking. Its five analog channels and high-sensitivity detectors provide the data needed for precise PID control, though it requires some coding and calibration to get the best results.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Five analog outputs for detailed line position sensing
  • High sensitivity and anti-jamming for consistent performance
  • Wide voltage compatibility (3.3V to 5V)
  • Includes connection cable for immediate use
  • Compact and lightweight design

Cons

  • Requires a microcontroller with analog inputs
  • Needs calibration and PID tuning for optimal tracking
  • No digital outputs, so all five channels must be read

Best for

Line-following robot projects requiring precise analog feedback

Not ideal for

Users looking for a plug-and-play digital line sensor without programming

Specifications

Operating Voltage (VDC)3.3 to 5
InterfaceAnalog
Shipping Weight0.014 kg
Shipping Dimensions10 × 9 × 1 cm

What's in the box

  • 1 x Tracker Sensor
  • 1 x XH2.54 7PIN wire

Frequently Asked Questions

What is the purpose of the five channels?
Each channel provides an analog signal from a separate infrared detector, allowing the sensor to determine the line's position relative to the sensor array. This is useful for calculating error in PID control.
Can I use this sensor with a 3.3V microcontroller?
Yes, the operating voltage range is 3.3V to 5V, so it works with both 3.3V and 5V systems.
Does the sensor require any libraries?
No special libraries are needed; you can read the analog values directly using your microcontroller's ADC functions.
What is included in the package?
The package includes one Tracker Sensor and one XH2.54 7-pin wire.
How do I mount the sensor for best performance?
Mount the sensor close to the ground (about 1-2 cm) and ensure the infrared detectors have a clear view of the surface. Avoid direct sunlight or strong ambient light interference.
What is the recommended control algorithm?
A PID control algorithm is recommended to process the analog readings and adjust motor speeds for stable line tracking.

Overview

The Waveshare Tracker Sensor is a line tracking module built around five ITR20001/T infrared detectors. It provides analog outputs for each channel, allowing a microcontroller to read varying reflectance levels and determine the position of a line. This sensor is intended for robotics applications where stable and accurate line following is required. With its high sensitivity and anti-jamming design, it performs reliably in different lighting conditions. The module operates from 3.3V to 5V, making it compatible with a wide range of microcontrollers and development boards.

Key Features

  • Five infrared detectors: Each channel uses an ITR20001/T sensor for detecting lines and edges.
  • Analog output: Provides continuous voltage signals proportional to reflected infrared, enabling fine-grained position sensing.
  • High sensitivity: Detects subtle contrast differences on surfaces for accurate tracking.
  • Anti-jamming: Designed to reduce interference from ambient light and electrical noise.
  • Stable performance: Consistent output helps maintain smooth robot movement.
  • Easy connection: Comes with an XH2.54 7-pin wire for plug-and-play setup with breadboards or custom PCBs.

Specifications Explained

Operating voltage (3.3V to 5V): The sensor can be powered from common logic levels, so it works with both 3.3V and 5V systems without additional level shifting.

Analog interface: Each of the five channels outputs an analog voltage that varies with the amount of infrared light reflected back to the detector. This allows your microcontroller to read a range of values, not just a simple on/off signal, which is useful for proportional control and PID algorithms.

ITR20001/T detectors: These are infrared reflective sensors that combine an emitter and a phototransistor. They are well-suited for line tracking because they can distinguish between light and dark surfaces.

Compatibility and Requirements

The Tracker Sensor requires a microcontroller with at least five analog input pins. It is compatible with boards operating at 3.3V or 5V, such as Arduino, Raspberry Pi (with ADC), and other common platforms. A 7-pin XH2.54 cable is included for connecting VCC, GND, and the five analog outputs to your MCU. No additional libraries are required; you can read the analog values directly. For best results, use a PID control algorithm to process the sensor data and adjust motor speeds accordingly.

Typical Uses

  • Line-following robots for competitions and education
  • Automated guided vehicles (AGVs) in small-scale automation
  • DIY robotics projects requiring precise edge detection
  • Prototyping and research in control systems

What's in the Box

  • 1 x Tracker Sensor
  • 1 x XH2.54 7PIN wire

Quick specs

Operating Voltage (VDC)
3.3 to 5
Interface
Analog
Shipping Weight
0.014 kg
Shipping Dimensions
10 × 9 × 1 cm
See all specifications