
1 / 8 · Click to enlarge
AI Summary
This 1.54-inch e-Ink display module offers 200x200 resolution and SPI connectivity for easy integration with popular microcontrollers. Its ultra-low power consumption and partial refresh capability make it perfect for battery-powered or remote display applications.
Key Highlights
- 200x200 resolution with black and white display
- SPI interface for easy connection to controllers
- Partial refresh time of 0.3 seconds
- Ultra-low standby power under 0.017 mW
- Wide viewing angle greater than 170 degrees
- No backlight required, retains image without power
Ideal For
- Makers building low-power sensor nodes
- Retail or warehouse shelf labeling projects
- Industrial instrument displays
- Raspberry Pi and Arduino enthusiasts
- Weather station hobbyists
Buying Tip
Check that your development board supports SPI and has sufficient GPIO pins for the control signals (CS, DC, RST, BUSY) before purchasing.
Elecvora expert review
Our verdict
The Waveshare 1.54 inch e-Ink module offers a practical balance of size, resolution, and power efficiency for embedded projects. Its SPI interface and extensive documentation make it accessible to both beginners and experienced developers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Ultra-low power consumption extends battery life
- Partial refresh enables responsive updates
- Wide viewing angle and sunlight readability
- Easy integration with popular microcontrollers
Cons
- Requires a controller board and wiring, not included
- Limited to black and white with 2 grey levels
- Full refresh takes 2 seconds, causing a visible flash
Best for
Low-power embedded displays in IoT and signage
Not ideal for
Applications requiring fast video or color displays
Specifications
| Model No. / Name | Display Module |
|---|---|
| Display Size (Inch) | 1.54 |
| Display Resolution (pixel) | 200 × 200 |
| Operating Voltage (V) | 3.3 ~ 5 |
| Interface | 3-wire SPI, 4-wire SPI |
| Display Color | Black and White |
| Grey level | 2 |
| Partial Refresh Time | 0.3s |
| Full Refresh Time (s) | 2 |
| Dot Pitch | 0.138 × 0.138 |
| Outline dimension (mm) | 48 × 33 |
| Refresh Power | 26.4mW(typ.) |
| Standby Power (mW) | <0.017 |
| Viewing Angle (Deg.) | >170° |
| Dimensions (L x W x H) mm | 48 x 34 x 10 |
| Weight (g) | 20 |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 8 × 7 × 4 cm |
What's in the box
- 1 x Waveshare 1.54 inch e-Ink Paper Display Module (200x200 resolution)
- 1 x Interfacing cable
Frequently Asked Questions
What is the resolution of this display?
What voltage does the module require?
Can I use this display with an Arduino?
Does the display retain its image when power is removed?
What is included in the package?
How fast is the refresh rate?
Overview
The Waveshare 1.54 inch e-Ink Paper Display Module is a compact electronic paper display designed for embedded systems and DIY electronics. It features a 200x200 pixel resolution and communicates via a 3-wire or 4-wire SPI interface, making it compatible with popular controller boards such as Raspberry Pi, Arduino, and STM32. The module is ideal for projects that require a low-power, sunlight-readable display with the ability to retain content without continuous power.
Key Features
- High Resolution: 200x200 pixels with a dot pitch of 0.138 x 0.138 mm for clear text and graphics.
- Fast Refresh: Partial refresh in 0.3 seconds and full refresh in 2 seconds.
- Ultra-Low Power: Standby power consumption is less than 0.017 mW, and refresh power is typically 26.4 mW.
- Wide Viewing Angle: Greater than 170 degrees, ensuring readability from almost any angle.
- Bistable Display: Retains the last image even when power is removed, thanks to its non-volatile nature.
- Sunlight Readable: No backlight needed; the display is highly visible in bright conditions.
Specifications Explained
The 1.54-inch screen size and 200x200 resolution deliver a pixel density suitable for displaying text and simple icons. The SPI interface simplifies wiring and saves GPIO pins on your microcontroller. The operating voltage range of 3.3V to 5V allows direct connection to both 3.3V and 5V logic systems. The partial refresh capability is particularly useful for applications that update only a portion of the screen, such as clocks or sensor readouts, as it reduces power consumption and extends the display's lifespan. The module's outline dimensions of 48 x 33 mm make it easy to integrate into compact enclosures.
Compatibility and Requirements
The module is designed to work with controller boards like Raspberry Pi, Arduino, and STM32, and requires a SPI-capable host. It comes with development resources and a manual that includes example code for these platforms. Note that you will need to provide your own controller board and connecting wires (the included interfacing cable helps with connections). The module does not include a backlight, so it relies on ambient light for viewing.
Typical Uses
This e-Ink display is well-suited for shelf labels in retail environments, industrial instrument panels where power efficiency is critical, and portable weather stations or sensor nodes that need to display data intermittently. Its low power consumption and ability to hold an image without power make it an excellent choice for battery-operated or remote applications.
What's in the Box
- 1 x Waveshare 1.54 inch e-Ink Paper Display Module (200x200 resolution)
- 1 x Interfacing cable
Quick specs
- Model No. / Name
- Display Module
- Display Size (Inch)
- 1.54
- Display Resolution (pixel)
- 200 × 200
- Operating Voltage (V)
- 3.3 ~ 5
- Interface
- 3-wire SPI, 4-wire SPI
- Display Color
- Black and White



















