Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.13-inch 250x122 black-and-white E-Ink HAT+ that mounts on a Raspberry Pi over SPI and keeps its last image without power. Fast 0.3-second partial refresh and immersion gold PCB construction make it a neat low-power status display.

Key Highlights

  • 2.13-inch E-Ink panel with 250x122 resolution in black and white
  • 3-wire and 4-wire SPI interface for Raspberry Pi HAT+ mounting
  • Partial refresh in about 0.3 seconds, full refresh in about 2 seconds
  • Immersion gold PCB resists oxidation and corrosion for long-term reliability
  • No backlight and under 0.01 mW standby keeps the last image on screen
  • Includes a Pwnagotchi porting tutorial plus driver board circuit examples

Ideal For

  • Raspberry Pi makers building compact status displays
  • Pwnagotchi hobbyists following the porting tutorial
  • Developers testing low-power E-Ink interfaces over SPI
  • Educators teaching SPI displays and refresh modes
  • Makers creating labels and small information panels

Buying Tip

Check that your Raspberry Pi model supports the HAT+ standard and that SPI is enabled before buying, since the display needs a host board and 3.3 V power to work.

Elecvora expert review

Our verdict

A tidy, well-built E-Ink HAT+ that does one job well: showing a static black-and-white image with almost no power draw. The immersion gold PCB and HAT+ layout make it a sensible pick for Raspberry Pi projects that need a readable, always-on panel.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Holds its image with no backlight and under 0.01 mW standby
  • Fast 0.3-second partial refresh for small updates
  • Immersion gold PCB for oxidation and corrosion resistance
  • HAT+ standard with extra mounting holes for easier builds
  • Development resources and a Pwnagotchi tutorial included

Cons

  • Black and white only, with no grayscale or colour
  • Small 2.13-inch panel limits how much can be shown at once
  • Requires a separate Raspberry Pi host board and 3.3 V supply

Best for

Raspberry Pi users who want a low-power static status display

Not ideal for

Projects that need video playback, colour or large-screen output

Specifications

Model No. / NameDisplay HAT
Display Size (Inch)2.13
Operating Voltage (V)3.3V
Interface3-wire SPI, 4-wire SPI
Display48.55 × 23.70mm
Dot Pitch0.194 × 0.194mm
Display Colorblack, white
Full Refresh Time (s)2s
Partial Refresh Time0.3s
Refresh Power10.5mW (typ.)
Standby Power (mW)<0.01mW(typ.)
Shipping Weight0.08 kg
Shipping Dimensions12 × 7 × 2.5 cm

What's in the box

  • 1 x Waveshare 2.13-inch E-Paper HAT+ for Raspberry Pi

Frequently Asked Questions

What resolution does the display offer?
The panel is 250x122 pixels in black and white, with a 48.55 x 23.70 mm active area and a 0.194 x 0.194 mm dot pitch.
Which interface does it use?
It connects over 3-wire or 4-wire SPI and operates at 3.3 V. SPI needs to be enabled on the Raspberry Pi host board.
How long does a refresh take?
A full refresh takes about 2 seconds, while a partial refresh takes about 0.3 seconds for the area being updated.
Does it need power to keep showing an image?
No. E-Ink keeps the last content on screen after power is removed, and standby draw is typically below 0.01 mW.
What is included in the package?
You receive one Waveshare 2.13-inch E-Paper HAT+. The Raspberry Pi board, power supply and other project parts are not included.
How should I care for the panel?
Keep the display away from moisture and physical pressure, and avoid leaving a static image for very long periods if you want to reduce the chance of image retention.

Overview

The Waveshare 2.13-inch E-Paper HAT+ is a small E-Ink display board built to plug onto a Raspberry Pi as a standard HAT+ add-on. The panel offers a 250x122 black-and-white image across a 48.55 x 23.70 mm active area, which is enough for status readouts, short lines of text and simple icons without the glare or constant draw of a conventional screen.

E-Ink works differently from LCD or OLED: there is no backlight, and the display keeps its last content even after power is removed. That makes this HAT+ well suited to information that changes occasionally rather than video or fast animation.

Key Features

  • Raspberry Pi HAT+ standard: the board follows the HAT+ form factor, which improves interoperability with other peripherals and helps speed up development.
  • Immersion gold process: the PCB surface treatment resists oxidation and corrosion, supports soldering performance and contributes to stable electrical properties over time.
  • Dual SPI modes: works over 3-wire or 4-wire SPI, giving flexibility in how the display is driven.
  • Fast partial refresh: about 0.3 seconds for a partial update, with roughly 2 seconds for a full refresh.
  • Very low standby draw: typically under 0.01 mW in standby, with 10.5 mW typical refresh power.
  • Extra mounting holes: the optimized PCB layout adds mounting points for fixing screws.

Specifications Explained

Resolution and size: 250x122 pixels spread over 48.55 x 23.70 mm gives a dot pitch of 0.194 x 0.194 mm, so text and simple graphics stay legible at close viewing distance. Two colors, black and white, keep the image crisp and the update logic simple.

Refresh behaviour: a 2-second full refresh clears and redraws the whole panel, while a 0.3-second partial refresh updates only the area that changed. Use partial refresh for counters and status fields, and a full refresh when the whole screen needs to be reset cleanly.

Power: the board runs at 3.3 V and draws about 10.5 mW during refresh, dropping below 0.01 mW in standby. In practice the display spends most of its life at near-zero consumption while still showing the last image.

Compatibility and Requirements

The HAT+ is designed for Raspberry Pi boards that accept the HAT+ standard, and it communicates over 3-wire or 4-wire SPI at 3.3 V. Waveshare provides online development resources, manual driver board circuit diagrams and examples for Raspberry Pi OS and Jetson Nano, along with a Pwnagotchi porting tutorial. A host board, a suitable power supply and SPI access are required; these are not included.

Typical Uses

  • Small status or system-information panels on a Raspberry Pi project
  • Low-power labels, tags and shelf or bin markers
  • Pwnagotchi builds following the supplied porting tutorial
  • Weather, calendar or sensor readouts that update occasionally
  • Learning projects around SPI displays and E-Ink refresh modes

What's in the Box

One Waveshare 2.13-inch E-Paper HAT+ for Raspberry Pi. The Raspberry Pi board, power supply and other project parts are not included.

Quick specs

Model No. / Name
Display HAT
Display Size (Inch)
2.13
Operating Voltage (V)
3.3V
Interface
3-wire SPI, 4-wire SPI
Display
48.55 × 23.70mm
Dot Pitch
0.194 × 0.194mm
See all specifications

More from WAVESHARE

View all →

Related Products

View all →