Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by LILYGO, this e-ink paper display is a good fit for makers, students and electronics hobbyists. Main specs: display size (inch) 4.7; mcu type ESP32-S3-WROOM-1-N16R8; flash 16MB.

Key Highlights

  • Display Size (Inch): 4.7
  • MCU Type: ESP32-S3-WROOM-1-N16R8
  • Flash: 16MB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Display Size (Inch)4.7
Display Resolution (pixel)540 × 960
MCU TypeESP32-S3-WROOM-1-N16R8
Flash16MB
PSRAM8MB
Driver ICEDO47TC1
Touchscreen (Y/N)Capacitive
Shipping Weight0.04 kg
Shipping Dimensions13 × 8 × 4 cm

Overview

The LILYGO® T5 4.7 Inch E-Paper V2.3 ESP32-S3 Development Driver Board TTGO Display Module Support TF Arduino (Female pin Welded Version), made by LILYGO, is listed in our e-ink paper display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Display Size (Inch): 4.7 (measured diagonally; compare with the space you have before ordering)
  • Display Resolution (pixel): 540 × 960 (measured diagonally; compare with the space you have before ordering)
  • MCU Type: ESP32-S3-WROOM-1-N16R8 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Flash: 16MB (space for firmware, files or media)
  • PSRAM: 8MB
  • Driver IC: EDO47TC1
  • Touchscreen (Y/N): Capacitive
  • Shipping Weight: 0.04 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is an LILYGO T5 4.7 Inch E-paper V2.3 ESP32-S3 WI-FI Bluetooth Module - With Female Header (H580). The LILYGO 4.7inch E-paper comes with ESP32-S3-WROOM-1-N16R8 MCU with Wi-fi Bluetooth V5.0 wireless connectivity. Onboard 16MB Flash & 8MB PSRAM, Which support PCF8563 RTC Battery capacity detection and 540 x 960 resolution.

Features:

  1. Supports TF (microSD) card
  2. Arduino compatibility
  3. Female pin connectors pre-soldered
  4. Utilizes TTGO display module
  5. Integrated driver board

Package Includes:

1 x T5 4.7 Inch E-paper V2.3

1 x JST 2.0mm 2Pin

Quick specs

Display Size (Inch)
4.7
Display Resolution (pixel)
540 × 960
MCU Type
ESP32-S3-WROOM-1-N16R8
Flash
16MB
PSRAM
8MB
Driver IC
EDO47TC1
See all specifications

More from LILYGO

View all →

Related Products

View all →