
1 / 4 · Click to enlarge
AI Summary
A small 3.3-5V sound detection module with an electret microphone and LM393 comparator that outputs a low signal when sound is present. It is an easy way to add sound-triggered behaviour to Arduino robots, acoustic lighting and simple alarm projects.
Key Highlights
- Works across a 3.3 to 5 VDC supply range
- Single channel output pulls low on detected sound
- Electret condenser microphone paired with LM393 comparator
- Onboard signal light confirms sound triggering
- Maximum induction distance of about 0.5 metre
- Compact 43 x 17 mm board with retaining bolt hole
Ideal For
- Arduino robot builders adding sound-triggered behaviour
- Students learning sensor input and comparator circuits
- Makers building acoustic control lighting
- Hobbyists creating simple sound and light alarms
- Anyone needing a compact close-range sound detection trigger
Buying Tip
Plan your mounting position carefully, since the microphone needs to sit within roughly 0.5 metre of the sound source for reliable triggering.
Elecvora expert review
Our verdict
A practical little trigger board for projects that only need to know whether sound is present. It is simple to wire, compact and forgiving on supply voltage, though it is not a measuring device.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Accepts a wide 3.3 to 5 VDC supply range
- Clear low-level output with an onboard indicator light
- Very compact and light for small builds
- Retaining bolt hole simplifies mounting
Cons
- Cannot measure sound level or identify frequencies
- Maximum induction distance is limited to about 0.5 metre
- Mounting hardware and cables are not included
Best for
Sound-triggered Arduino robots and simple acoustic control projects
Not ideal for
Applications needing sound level measurement or frequency analysis
Specifications
| Operating Voltage (VDC) | 3.3 to 5 |
|---|---|
| Induction Distance | 0.5 Meter |
| Length (mm) | 43 |
| Width (mm) | 17 |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 4 × 2 cm |
What's in the box
- 1 x Sound Detection Module Sensor
Frequently Asked Questions
How does the module output sound detection?
What voltage does it need?
Can it tell me how loud a sound is?
What is the maximum detection distance?
Is it compatible with Arduino robots?
What is included with the module?
Overview
This sound detection sensor module is a small, ready-to-mount board for projects that need to react to sound. At its centre is an electret condenser microphone, and the signal is processed by an LM393 comparator that provides a single channel output. When sound is detected, the output becomes effective at a low level and the onboard signal light illuminates, giving you immediate feedback without extra test equipment.
The board runs from 3.3 to 5 VDC, so it suits common microcontroller logic supplies, and its 43 x 17 mm footprint keeps it out of the way inside small robots and enclosures. The maximum induction distance is approximately 0.5 metre.
Key Features
- Single channel signal output for straightforward digital reading by a host board.
- Low-level active output when sound is present, with a matching signal light.
- LM393 comparator and electret condenser microphone for reliable sound pickup.
- Wide supply range of 3.3 to 5 VDC.
- Retaining bolt hole for quick, secure installation.
- Lightweight at about 3 g, so it adds almost nothing to a build.
Specifications Explained
Operating voltage
A 3.3 to 5 VDC range means the module can share the supply used by most Arduino-class boards and small logic circuits, keeping wiring simple.
Induction distance
The 0.5 metre maximum induction distance is a close-range figure. Position the microphone near the sound source for the most dependable triggering.
Output behaviour
The output is a single channel that goes low when sound is detected. Your code simply watches for that low state rather than measuring a varying analogue level.
Size and weight
At 43 mm long, 17 mm wide and roughly 3 g, the board is easy to tuck into a robot chassis or a small project box.
Compatibility and Requirements
The module is designed for use with Arduino robots and similar microcontroller projects that can accept a single channel digital input and supply 3.3 to 5 VDC. You will need a host board, a suitable power source and connecting wires. Because the sensor only recognises the presence of sound through vibration, it cannot report how loud a sound is or identify specific frequencies.
Typical Uses
- Sound-triggered behaviour on small Arduino robots and intelligent vehicles.
- Acoustic control lighting, including sound and light alarm combinations with a photosensitive sensor.
- Simple sound detection experiments and classroom demonstrations.
- Clap or noise-triggered switching in hobby electronics.
What's in the Box
One sound detection sensor module is included. Mounting hardware and cables are not listed.
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5
- Induction Distance
- 0.5 Meter
- Length (mm)
- 43
- Width (mm)
- 17
- Weight (g)
- 3
- Shipping Weight
- 0.005 kg

















